Merge branch 'dt/schema-cleanups' into dt/linus

Author: robherring

.clang-format

@@ -80,6 +80,7 @@ ForEachMacros:
   - 'ax25_uid_for_each'
   - '__bio_for_each_bvec'
   - 'bio_for_each_bvec'
+  - 'bio_for_each_bvec_all'
   - 'bio_for_each_integrity_vec'
   - '__bio_for_each_segment'
   - 'bio_for_each_segment'
@@ -142,10 +143,13 @@ ForEachMacros:
   - 'for_each_card_auxs'
   - 'for_each_card_auxs_safe'
   - 'for_each_card_components'
+  - 'for_each_card_dapms'
   - 'for_each_card_pre_auxs'
   - 'for_each_card_prelinks'
   - 'for_each_card_rtds'
   - 'for_each_card_rtds_safe'
+  - 'for_each_card_widgets'
+  - 'for_each_card_widgets_safe'
   - 'for_each_cgroup_storage_type'
   - 'for_each_child_of_node'
   - 'for_each_clear_bit'
@@ -160,6 +164,7 @@ ForEachMacros:
   - 'for_each_cpu_and'
   - 'for_each_cpu_not'
   - 'for_each_cpu_wrap'
+  - 'for_each_dapm_widgets'
   - 'for_each_dev_addr'
   - 'for_each_dev_scope'
   - 'for_each_displayid_db'
@@ -170,7 +175,6 @@ ForEachMacros:
   - 'for_each_dpcm_fe'
   - 'for_each_drhd_unit'
   - 'for_each_dss_dev'
-  - 'for_each_efi_handle'
   - 'for_each_efi_memory_desc'
   - 'for_each_efi_memory_desc_in_map'
   - 'for_each_element'
@@ -191,6 +195,7 @@ ForEachMacros:
   - 'for_each_ip_tunnel_rcu'
   - 'for_each_irq_nr'
   - 'for_each_link_codecs'
+  - 'for_each_link_cpus'
   - 'for_each_link_platforms'
   - 'for_each_lru'
   - 'for_each_matching_node'
@@ -250,6 +255,7 @@ ForEachMacros:
   - 'for_each_pci_bridge'
   - 'for_each_pci_dev'
   - 'for_each_pci_msi_entry'
+  - 'for_each_pcm_streams'
   - 'for_each_populated_zone'
   - 'for_each_possible_cpu'
   - 'for_each_present_cpu'
@@ -260,9 +266,12 @@ ForEachMacros:
   - 'for_each_property_of_node'
   - 'for_each_registered_fb'
   - 'for_each_reserved_mem_region'
-  - 'for_each_rtd_codec_dai'
-  - 'for_each_rtd_codec_dai_rollback'
+  - 'for_each_rtd_codec_dais'
+  - 'for_each_rtd_codec_dais_rollback'
   - 'for_each_rtd_components'
+  - 'for_each_rtd_cpu_dais'
+  - 'for_each_rtd_cpu_dais_rollback'
+  - 'for_each_rtd_dais'
   - 'for_each_set_bit'
   - 'for_each_set_bit_from'
   - 'for_each_set_clump8'
@@ -334,6 +343,7 @@ ForEachMacros:
   - 'klp_for_each_object'
   - 'klp_for_each_object_safe'
   - 'klp_for_each_object_static'
+  - 'kunit_suite_for_each_test_case'
   - 'kvm_for_each_memslot'
   - 'kvm_for_each_vcpu'
   - 'list_for_each'
@@ -387,6 +397,7 @@ ForEachMacros:
   - 'of_property_for_each_string'
   - 'of_property_for_each_u32'
   - 'pci_bus_for_each_resource'
+  - 'pcm_for_each_format'
   - 'ping_portaddr_for_each_entry'
   - 'plist_for_each'
   - 'plist_for_each_continue'
@@ -482,7 +493,7 @@ KeepEmptyLinesAtTheStartOfBlocks: false
 MacroBlockBegin: ''
 MacroBlockEnd: ''
 MaxEmptyLinesToKeep: 1
-NamespaceIndentation: Inner
+NamespaceIndentation: None
 #ObjCBinPackProtocolList: Auto # Unknown to clang-format-5.0
 ObjCBlockIndentWidth: 8
 ObjCSpaceAfterProperty: true

.gitignore

@@ -56,6 +56,7 @@ modules.order
 /linux
 /vmlinux
 /vmlinux.32
+/vmlinux.symvers
 /vmlinux-gdb.py
 /vmlinuz
 /System.map

.mailmap

@@ -152,6 +152,7 @@ Krzysztof Kozlowski <krzk@kernel.org> <k.kozlowski.k@gmail.com>
 Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
 Leon Romanovsky <leon@kernel.org> <leon@leon.nu>
 Leon Romanovsky <leon@kernel.org> <leonro@mellanox.com>
+Leonardo Bras <leobras.c@gmail.com> <leonardo@linux.ibm.com>
 Leonid I Ananiev <leonid.i.ananiev@intel.com>
 Linas Vepstas <linas@austin.ibm.com>
 Linus Lüssing <linus.luessing@c0d3.blue> <linus.luessing@web.de>
@@ -234,7 +235,9 @@ Ralf Baechle <ralf@linux-mips.org>
 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
 Randy Dunlap <rdunlap@infradead.org> <rdunlap@xenotime.net>
 Rémi Denis-Courmont <rdenis@simphalempin.com>
-Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
+Ricardo Ribalda <ribalda@kernel.org> <ricardo.ribalda@gmail.com>
+Ricardo Ribalda <ribalda@kernel.org> <ricardo@ribalda.com>
+Ricardo Ribalda <ribalda@kernel.org> Ricardo Ribalda Delgado <ribalda@kernel.org>
 Ross Zwisler <zwisler@kernel.org> <ross.zwisler@linux.intel.com>
 Rudolf Marek <R.Marek@sh.cvut.cz>
 Rui Saraiva <rmps@joel.ist.utl.pt>
@@ -288,6 +291,8 @@ Vladimir Davydov <vdavydov.dev@gmail.com> <vdavydov@virtuozzo.com>
 Vladimir Davydov <vdavydov.dev@gmail.com> <vdavydov@parallels.com>
 Takashi YOSHII <takashi.yoshii.zj@renesas.com>
 Will Deacon <will@kernel.org> <will.deacon@arm.com>
+Wolfram Sang <wsa@kernel.org> <wsa@the-dreams.de>
+Wolfram Sang <wsa@kernel.org> <w.sang@pengutronix.de>
 Yakir Yang <kuankuan.y@gmail.com> <ykk@rock-chips.com>
 Yusuke Goda <goda.yusuke@renesas.com>
 Gustavo Padovan <gustavo@las.ic.unicamp.br>

CREDITS

@@ -3104,14 +3104,16 @@ W: http://www.qsl.net/dl1bke/
 D: Generic Z8530 driver, AX.25 DAMA slave implementation
 D: Several AX.25 hacks
 
-N: Ricardo Ribalda Delgado
-E: ricardo.ribalda@gmail.com
+N: Ricardo Ribalda
+E: ribalda@kernel.org
 W: http://ribalda.com
 D: PLX USB338x driver
 D: PCA9634 driver
 D: Option GTM671WFS
 D: Fintek F81216A
 D: AD5761 iio driver
+D: TI DAC7612 driver
+D: Sony IMX214 driver
 D: Various kernel hacks
 S: Qtechnology A/S
 S: Valby Langgade 142

Documentation/ABI/obsolete/sysfs-cpuidle

@@ -0,0 +1,9 @@
+What:		/sys/devices/system/cpu/cpuidle/current_governor_ro
+Date:		April, 2020
+Contact:	linux-pm@vger.kernel.org
+Description:
+	current_governor_ro shows current using cpuidle governor, but read only.
+	with the update that cpuidle governor can be changed at runtime in default,
+	both current_governor and current_governor_ro co-exist under
+	/sys/devices/system/cpu/cpuidle/ file, it's duplicate so make
+	current_governor_ro obselete.

Documentation/ABI/obsolete/sysfs-driver-intel_pmc_bxt

@@ -0,0 +1,22 @@
+These files allow sending arbitrary IPC commands to the PMC/SCU which
+may be dangerous. These will be removed eventually and should not be
+used in any new applications.
+
+What:		/sys/bus/platform/devices/INT34D2:00/simplecmd
+Date:		Jun 2015
+KernelVersion:	4.1
+Contact:	Mika Westerberg <mika.westerberg@linux.intel.com>
+Description:	This interface allows userspace to send an arbitrary
+		IPC command to the PMC/SCU.
+
+		Format: %d %d where first number is command and
+		second number is subcommand.
+
+What:		/sys/bus/platform/devices/INT34D2:00/northpeak
+Date:		Jun 2015
+KernelVersion:	4.1
+Contact:	Mika Westerberg <mika.westerberg@linux.intel.com>
+Description:	This interface allows userspace to enable and disable
+		Northpeak through the PMC/SCU.
+
+		Format: %u.

Documentation/ABI/stable/sysfs-devices-node

@@ -54,7 +54,7 @@ Date:		October 2002
 Contact:	Linux Memory Management list <linux-mm@kvack.org>
 Description:
 		Provides information about the node's distribution and memory
-		utilization. Similar to /proc/meminfo, see Documentation/filesystems/proc.txt
+		utilization. Similar to /proc/meminfo, see Documentation/filesystems/proc.rst
 
 What:		/sys/devices/system/node/nodeX/numastat
 Date:		October 2002

Documentation/ABI/stable/sysfs-driver-dma-idxd

@@ -1,3 +1,9 @@
+What:		sys/bus/dsa/devices/dsa<m>/version
+Date:		Apr 15, 2020
+KernelVersion:	5.8.0
+Contact:	dmaengine@vger.kernel.org
+Description:	The hardware version number.
+
 What:           sys/bus/dsa/devices/dsa<m>/cdev_major
 Date:           Oct 25, 2019
 KernelVersion: 	5.6.0

Documentation/ABI/stable/sysfs-driver-firmware-zynqmp

@@ -0,0 +1,103 @@
+What:		/sys/devices/platform/firmware\:zynqmp-firmware/ggs*
+Date:		March 2020
+KernelVersion:	5.6
+Contact:	"Jolly Shah" <jollys@xilinx.com>
+Description:
+		Read/Write PMU global general storage register value,
+		GLOBAL_GEN_STORAGE{0:3}.
+		Global general storage register that can be used
+		by system to pass information between masters.
+
+		The register is reset during system or power-on
+		resets. Three registers are used by the FSBL and
+		other Xilinx software products: GLOBAL_GEN_STORAGE{4:6}.
+
+		Usage:
+		# cat /sys/devices/platform/firmware\:zynqmp-firmware/ggs0
+		# echo <value> > /sys/devices/platform/firmware\:zynqmp-firmware/ggs0
+
+		Example:
+		# cat /sys/devices/platform/firmware\:zynqmp-firmware/ggs0
+		# echo 0x1234ABCD > /sys/devices/platform/firmware\:zynqmp-firmware/ggs0
+
+Users:		Xilinx
+
+What:		/sys/devices/platform/firmware\:zynqmp-firmware/pggs*
+Date:		March 2020
+KernelVersion:	5.6
+Contact:	"Jolly Shah" <jollys@xilinx.com>
+Description:
+		Read/Write PMU persistent global general storage register
+		value, PERS_GLOB_GEN_STORAGE{0:3}.
+		Persistent global general storage register that
+		can be used by system to pass information between
+		masters.
+
+		This register is only reset by the power-on reset
+		and maintains its value through a system reset.
+		Four registers are used by the FSBL and other Xilinx
+		software products: PERS_GLOB_GEN_STORAGE{4:7}.
+		Register is reset only by a POR reset.
+
+		Usage:
+		# cat /sys/devices/platform/firmware\:zynqmp-firmware/pggs0
+		# echo <value> > /sys/devices/platform/firmware\:zynqmp-firmware/pggs0
+
+		Example:
+		# cat /sys/devices/platform/firmware\:zynqmp-firmware/pggs0
+		# echo 0x1234ABCD > /sys/devices/platform/firmware\:zynqmp-firmware/pggs0
+
+Users:		Xilinx
+
+What:		/sys/devices/platform/firmware\:zynqmp-firmware/shutdown_scope
+Date:		March 2020
+KernelVersion:	5.6
+Contact:	"Jolly Shah" <jollys@xilinx.com>
+Description:
+		This sysfs interface allows to set the shutdown scope for the
+		next shutdown request. When the next shutdown is performed, the
+		platform specific portion of PSCI-system_off can use the chosen
+		shutdown scope.
+
+		Following are available shutdown scopes(subtypes):
+
+		subsystem:	Only the APU along with all of its peripherals
+				not used by other processing units will be
+				shut down. This may result in the FPD power
+				domain being shut down provided that no other
+				processing unit uses FPD peripherals or DRAM.
+		ps_only:	The complete PS will be shut down, including the
+				RPU, PMU, etc.  Only the PL domain (FPGA)
+				remains untouched.
+		system:		The complete system/device is shut down.
+
+		Usage:
+		# cat /sys/devices/platform/firmware\:zynqmp-firmware/shutdown_scope
+		# echo <scope> > /sys/devices/platform/firmware\:zynqmp-firmware/shutdown_scope
+
+		Example:
+		# cat /sys/devices/platform/firmware\:zynqmp-firmware/shutdown_scope
+		# echo "subsystem" > /sys/devices/platform/firmware\:zynqmp-firmware/shutdown_scope
+
+Users:		Xilinx
+
+What:		/sys/devices/platform/firmware\:zynqmp-firmware/health_status
+Date:		March 2020
+KernelVersion:	5.6
+Contact:	"Jolly Shah" <jollys@xilinx.com>
+Description:
+		This sysfs interface allows to set the health status. If PMUFW
+		is compiled with CHECK_HEALTHY_BOOT, it will check the healthy
+		bit on FPD WDT expiration. If healthy bit is set by a user
+		application running in Linux, PMUFW will do APU only restart. If
+		healthy bit is not set during FPD WDT expiration, PMUFW will do
+		system restart.
+
+		Usage:
+		Set healthy bit
+		# echo 1 > /sys/devices/platform/firmware\:zynqmp-firmware/health_status
+
+		Unset healthy bit
+		# echo 0 > /sys/devices/platform/firmware\:zynqmp-firmware/health_status
+
+Users:		Xilinx

Documentation/ABI/testing/debugfs-cec-error-inj

@@ -37,4 +37,4 @@ when changes are made.
 
 The following CEC error injection implementations exist:
 
-- Documentation/media/uapi/cec/cec-pin-error-inj.rst
+- Documentation/userspace-api/media/cec/cec-pin-error-inj.rst