Merge tag 'armsoc-fixes-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC fixes from Arnd Bergmann:
 "This time there is one fix for the error path in the mediatek cmdq
  driver (used by their video driver) and a couple of devicetree fixes,
  mostly for 32-bit ARM, and fairly harmless:

   - On OMAP2 there were a few regressions in the ethernet drivers, one
     of them leading to an external abort trap

   - One Raspberry Pi version had a misconfigured LED

   - Interrupts on Broadcom NSP were slightly misconfigured

   - One i.MX6q board had issues with graphics mode setting

   - On mmp3 there are some minor fixes that were submitted for v5.8
     with a cc:stable tag, so I ended up picking them up here as well

   - The Mediatek Video Codec needs to run at a higher frequency than
     configured originally"

* tag 'armsoc-fixes-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  ARM: dts: mmp3: Drop usb-nop-xceiv from HSIC phy
  ARM: dts: mmp3-dell-ariel: Fix the SPI devices
  ARM: dts: mmp3: Use the MMP3 compatible string for /clocks
  ARM: dts: bcm: HR2: Fix PPI interrupt types
  ARM: dts: bcm2835-rpi-zero-w: Fix led polarity
  ARM: dts/imx6q-bx50v3: Set display interface clock parents
  soc: mediatek: cmdq: return send msg error code
  arm64: dts: mt8173: fix vcodec-enc clock
  ARM: dts: Fix wrong mdio clock for dm814x
  ARM: dts: am437x: fix networking on boards with ksz9031 phy
  ARM: dts: am57xx: fix networking on boards with ksz9031 phy

Author: torvalds

arch/arm/boot/dts/am437x-gp-evm.dts

@@ -943,7 +943,7 @@
 
 &cpsw_emac0 {
 	phy-handle = <&ethphy0>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-rxid";
 };
 
 &elm {

arch/arm/boot/dts/am437x-idk-evm.dts

@@ -504,7 +504,7 @@
 
 &cpsw_emac0 {
 	phy-handle = <&ethphy0>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-rxid";
 };
 
 &rtc {

arch/arm/boot/dts/am437x-sk-evm.dts

@@ -833,13 +833,13 @@
 
 &cpsw_emac0 {
 	phy-handle = <&ethphy0>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-rxid";
 	dual_emac_res_vlan = <1>;
 };
 
 &cpsw_emac1 {
 	phy-handle = <&ethphy1>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-rxid";
 	dual_emac_res_vlan = <2>;
 };
 

arch/arm/boot/dts/am571x-idk.dts

@@ -190,13 +190,13 @@
 
 &cpsw_port1 {
 	phy-handle = <&ethphy0_sw>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-rxid";
 	ti,dual-emac-pvid = <1>;
 };
 
 &cpsw_port2 {
 	phy-handle = <&ethphy1_sw>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-rxid";
 	ti,dual-emac-pvid = <2>;
 };
 

arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi

@@ -433,13 +433,13 @@
 
 &cpsw_emac0 {
 	phy-handle = <&phy0>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-rxid";
 	dual_emac_res_vlan = <1>;
 };
 
 &cpsw_emac1 {
 	phy-handle = <&phy1>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-rxid";
 	dual_emac_res_vlan = <2>;
 };
 

arch/arm/boot/dts/am57xx-idk-common.dtsi

@@ -408,13 +408,13 @@
 
 &cpsw_emac0 {
 	phy-handle = <&ethphy0>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-rxid";
 	dual_emac_res_vlan = <1>;
 };
 
 &cpsw_emac1 {
 	phy-handle = <&ethphy1>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-rxid";
 	dual_emac_res_vlan = <2>;
 };
 

arch/arm/boot/dts/bcm-hr2.dtsi

@@ -75,23 +75,23 @@
 		timer@20200 {
 			compatible = "arm,cortex-a9-global-timer";
 			reg = <0x20200 0x100>;
-			interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_PPI 11 IRQ_TYPE_EDGE_RISING>;
 			clocks = <&periph_clk>;
 		};
 
 		twd-timer@20600 {
 			compatible = "arm,cortex-a9-twd-timer";
 			reg = <0x20600 0x20>;
 			interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) |
-						  IRQ_TYPE_LEVEL_HIGH)>;
+						  IRQ_TYPE_EDGE_RISING)>;
 			clocks = <&periph_clk>;
 		};
 
 		twd-watchdog@20620 {
 			compatible = "arm,cortex-a9-twd-wdt";
 			reg = <0x20620 0x20>;
 			interrupts = <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) |
-						  IRQ_TYPE_LEVEL_HIGH)>;
+						  IRQ_TYPE_EDGE_RISING)>;
 			clocks = <&periph_clk>;
 		};
 

arch/arm/boot/dts/bcm2835-rpi-zero-w.dts

@@ -24,7 +24,7 @@
 
 	leds {
 		act {
-			gpios = <&gpio 47 GPIO_ACTIVE_HIGH>;
+			gpios = <&gpio 47 GPIO_ACTIVE_LOW>;
 		};
 	};
 

arch/arm/boot/dts/dm814x.dtsi

@@ -693,7 +693,7 @@
 
 					davinci_mdio: mdio@800 {
 						compatible = "ti,cpsw-mdio", "ti,davinci_mdio";
-						clocks = <&alwon_ethernet_clkctrl DM814_ETHERNET_CPGMAC0_CLKCTRL 0>;
+						clocks = <&cpsw_125mhz_gclk>;
 						clock-names = "fck";
 						#address-cells = <1>;
 						#size-cells = <0>;

arch/arm/boot/dts/imx6q-b450v3.dts

@@ -65,13 +65,6 @@
 	};
 };
 
-&clks {
-	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
-			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
-	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
-				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
-};
-
 &ldb {
 	status = "okay";