ata: pata_falcon: add data_swab option to byte-swap disk data

Some users of pata_falcon on Q40 have IDE disks in default
IDE little endian byte order, whereas legacy disks use
host-native big-endian byte order as on the Atari Falcon.

Add module parameter 'data_swab' to allow connecting drives
with non-native data byte order. Drives selected by the
data_swap bit mask will have their user data byte-swapped to
host byte order, i.e. 'pata_falcon.data_swab=2' will byte-swap
all user data on drive B, leaving data on drive A in native
byte order. On Q40, drives on a second IDE interface may be
added to the bit mask as bits 2 and 3.

Default setting is no byte swapping, i.e. compatibility with
the native Falcon or Q40 operating system disk format.

Cc: William R Sowerbutts <will@sowerbutts.com>
Cc: Finn Thain <fthain@linux-m68k.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: William R Sowerbutts <will@sowerbutts.com>
Signed-off-by: Michael Schmitz <schmitzmic@gmail.com>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>

Author: Michael Schmitz

drivers/ata/pata_falcon.c

@@ -32,6 +32,11 @@
 #define DRV_NAME "pata_falcon"
 #define DRV_VERSION "0.1.0"
 
+static int pata_falcon_swap_mask;
+
+module_param_named(data_swab, pata_falcon_swap_mask, int, 0444);
+MODULE_PARM_DESC(data_swab, "Data byte swap enable/disable bitmap (0x1==drive1, 0x2==drive2, 0x4==drive3, 0x8==drive4, default==0)");
+
 static const struct scsi_host_template pata_falcon_sht = {
 	ATA_PIO_SHT(DRV_NAME),
 };
@@ -49,7 +54,7 @@ static unsigned int pata_falcon_data_xfer(struct ata_queued_cmd *qc,
 
 	if (dev->class == ATA_DEV_ATA && cmd &&
 	    !blk_rq_is_passthrough(scsi_cmd_to_rq(cmd)))
-		swap = 0;
+		swap = (uintptr_t)ap->private_data & BIT(dev->devno);
 
 	/* Transfer multiple of 2 bytes */
 	if (rw == READ) {
@@ -123,6 +128,7 @@ static int __init pata_falcon_init_one(struct platform_device *pdev)
 	struct ata_host *host;
 	struct ata_port *ap;
 	void __iomem *base, *ctl_base;
+	int mask_shift = 0; /* Q40 & Falcon default */
 	int irq = 0, io_offset = 1, reg_shift = 2; /* Falcon defaults */
 
 	dev_info(&pdev->dev, "Atari Falcon and Q40/Q60 PATA controller\n");
@@ -193,6 +199,10 @@ static int __init pata_falcon_init_one(struct platform_device *pdev)
 	ata_port_desc(ap, "cmd %px ctl %px data %px",
 		      base, ctl_base, ap->ioaddr.data_addr);
 
+	if (pdev->id > 0)
+		mask_shift = 2;
+	ap->private_data = (void *)(uintptr_t)(pata_falcon_swap_mask >> mask_shift);
+
 	irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
 	if (irq_res && irq_res->start > 0) {
 		irq = irq_res->start;