ARM: dts: stm32: move SCMI related nodes in a dedicated file for stm32mp15

Adding a "secure" version of STM32 boards (DK1/DK2/ED1/EV1), SCMI (clock/
reset) protocol and OP-TEE node have been added in SoC dtsi file
(stm32mp151.dtsi). They have been added with a status disabled in order to
keep our legacy unchanged. It is actually not enough to keep our legacy
unchanged.

First, just a reminder about our use case: TF-A (BL2) loads and starts
OP-TEE, then loads and runs U-Boot. U-Boot code checks if an OP-TEE is
running, if yes it searches in Kernel device tree if an OP-TEE node is
present:

-If the OP-TEE node is not present then U-Boot copies OP-TEE node and its
reserved memory region from U-Boot device tree to the kernel device tree.

-If the OP-TEE node is present then it does nothing (this OP-TEE node will
be used by Linux). So U-Boot lets the kernel device tree unchanged thinking
it is correct for an OP-TEE usage. It is the case for our legacy boards,
the OP-TEE node is present (although disabled) but the reserved memory
region is not declared. As no memory region has been reserved for OP-TEE,
the end of DDR is seen by the kernel as free and then used for CMA. But as
OP-TEE is running, this end of DDR is already used by OP-TEE. So as soon as
kernel tries to access to the CMA region OP-TEE raises an error.

To fix it, all OP-TEE node and SCMI is moved in a dedicated file.

Fixes: 40b4157 ("ARM: dts: stm32: enable optee firmware and SCMI support on STM32MP15")
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Link: https://lore.kernel.org/r/20220613071920.5463-1-alexandre.torgue@foss.st.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Author: Alexandre Torgue

arch/arm/boot/dts/stm32mp15-scmi.dtsi

@@ -0,0 +1,47 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2022 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics.
+ */
+
+/ {
+	firmware {
+		optee: optee {
+			compatible = "linaro,optee-tz";
+			method = "smc";
+		};
+
+		scmi: scmi {
+			compatible = "linaro,scmi-optee";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			linaro,optee-channel-id = <0>;
+			shmem = <&scmi_shm>;
+
+			scmi_clk: protocol@14 {
+				reg = <0x14>;
+				#clock-cells = <1>;
+			};
+
+			scmi_reset: protocol@16 {
+				reg = <0x16>;
+				#reset-cells = <1>;
+			};
+		};
+	};
+
+	soc {
+		scmi_sram: sram@2ffff000 {
+			compatible = "mmio-sram";
+			reg = <0x2ffff000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x2ffff000 0x1000>;
+
+			scmi_shm: scmi-sram@0 {
+				compatible = "arm,scmi-shmem";
+				reg = <0 0x80>;
+			};
+		};
+	};
+};

arch/arm/boot/dts/stm32mp151.dtsi

@@ -115,54 +115,13 @@
 		status = "disabled";
 	};
 
-	firmware {
-		optee: optee {
-			compatible = "linaro,optee-tz";
-			method = "smc";
-			status = "disabled";
-		};
-
-		scmi: scmi {
-			compatible = "linaro,scmi-optee";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			linaro,optee-channel-id = <0>;
-			shmem = <&scmi_shm>;
-			status = "disabled";
-
-			scmi_clk: protocol@14 {
-				reg = <0x14>;
-				#clock-cells = <1>;
-			};
-
-			scmi_reset: protocol@16 {
-				reg = <0x16>;
-				#reset-cells = <1>;
-			};
-		};
-	};
-
 	soc {
 		compatible = "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
 		interrupt-parent = <&intc>;
 		ranges;
 
-		scmi_sram: sram@2ffff000 {
-			compatible = "mmio-sram";
-			reg = <0x2ffff000 0x1000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 0x2ffff000 0x1000>;
-
-			scmi_shm: scmi-sram@0 {
-				compatible = "arm,scmi-shmem";
-				reg = <0 0x80>;
-				status = "disabled";
-			};
-		};
-
 		timers2: timer@40000000 {
 			#address-cells = <1>;
 			#size-cells = <0>;

arch/arm/boot/dts/stm32mp157a-dk1-scmi.dts

@@ -7,6 +7,7 @@
 /dts-v1/;
 
 #include "stm32mp157a-dk1.dts"
+#include "stm32mp15-scmi.dtsi"
 
 / {
 	model = "STMicroelectronics STM32MP157A-DK1 SCMI Discovery Board";
@@ -54,10 +55,6 @@
 	resets = <&scmi_reset RST_SCMI_MCU>;
 };
 
-&optee {
-	status = "okay";
-};
-
 &rcc {
 	compatible = "st,stm32mp1-rcc-secure", "syscon";
 	clock-names = "hse", "hsi", "csi", "lse", "lsi";
@@ -76,11 +73,3 @@
 &rtc {
 	clocks = <&scmi_clk CK_SCMI_RTCAPB>, <&scmi_clk CK_SCMI_RTC>;
 };
-
-&scmi {
-	status = "okay";
-};
-
-&scmi_shm {
-	status = "okay";
-};

arch/arm/boot/dts/stm32mp157c-dk2-scmi.dts

@@ -7,6 +7,7 @@
 /dts-v1/;
 
 #include "stm32mp157c-dk2.dts"
+#include "stm32mp15-scmi.dtsi"
 
 / {
 	model = "STMicroelectronics STM32MP157C-DK2 SCMI Discovery Board";
@@ -63,10 +64,6 @@
 	resets = <&scmi_reset RST_SCMI_MCU>;
 };
 
-&optee {
-	status = "okay";
-};
-
 &rcc {
 	compatible = "st,stm32mp1-rcc-secure", "syscon";
 	clock-names = "hse", "hsi", "csi", "lse", "lsi";
@@ -85,11 +82,3 @@
 &rtc {
 	clocks = <&scmi_clk CK_SCMI_RTCAPB>, <&scmi_clk CK_SCMI_RTC>;
 };
-
-&scmi {
-	status = "okay";
-};
-
-&scmi_shm {
-	status = "okay";
-};

arch/arm/boot/dts/stm32mp157c-ed1-scmi.dts

@@ -7,6 +7,7 @@
 /dts-v1/;
 
 #include "stm32mp157c-ed1.dts"
+#include "stm32mp15-scmi.dtsi"
 
 / {
 	model = "STMicroelectronics STM32MP157C-ED1 SCMI eval daughter";
@@ -59,10 +60,6 @@
 	resets = <&scmi_reset RST_SCMI_MCU>;
 };
 
-&optee {
-	status = "okay";
-};
-
 &rcc {
 	compatible = "st,stm32mp1-rcc-secure", "syscon";
 	clock-names = "hse", "hsi", "csi", "lse", "lsi";
@@ -81,11 +78,3 @@
 &rtc {
 	clocks = <&scmi_clk CK_SCMI_RTCAPB>, <&scmi_clk CK_SCMI_RTC>;
 };
-
-&scmi {
-	status = "okay";
-};
-
-&scmi_shm {
-	status = "okay";
-};

arch/arm/boot/dts/stm32mp157c-ev1-scmi.dts

@@ -7,6 +7,7 @@
 /dts-v1/;
 
 #include "stm32mp157c-ev1.dts"
+#include "stm32mp15-scmi.dtsi"
 
 / {
 	model = "STMicroelectronics STM32MP157C-EV1 SCMI eval daughter on eval mother";
@@ -68,10 +69,6 @@
 	resets = <&scmi_reset RST_SCMI_MCU>;
 };
 
-&optee {
-	status = "okay";
-};
-
 &rcc {
 	compatible = "st,stm32mp1-rcc-secure", "syscon";
 	clock-names = "hse", "hsi", "csi", "lse", "lsi";
@@ -90,11 +87,3 @@
 &rtc {
 	clocks = <&scmi_clk CK_SCMI_RTCAPB>, <&scmi_clk CK_SCMI_RTC>;
 };
-
-&scmi {
-	status = "okay";
-};
-
-&scmi_shm {
-	status = "okay";
-};