PCI: mediatek-gen3: Move reset delay in mtk_pcie_en7581_power_up()

Airoha EN7581 has a hw bug asserting/releasing PCIE_PE_RSTB signal
causing occasional PCIe link down issues. In order to overcome the
problem, PCIe block is reset using REG_PCI_CONTROL (0x88) and
REG_RESET_CONTROL (0x834) registers available in the clock module
running clk_bulk_prepare_enable() in mtk_pcie_en7581_power_up().

In order to make the code more readable, move the wait for the time
needed to complete the PCIe reset from en7581_pci_enable() to
mtk_pcie_en7581_power_up().

Reduce reset timeout from 250ms to the standard PCIE_T_PVPERL_MS value
(100ms) since it has no impact on the driver behavior.

Link: https://lore.kernel.org/r/20250108-pcie-en7581-fixes-v6-4-21ac939a3b9b@kernel.org
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Stephen Boyd <sboyd@kernel.org>

Author: LorenzoBianconi

drivers/clk/clk-en7523.c

@@ -477,7 +477,6 @@ static int en7581_pci_enable(struct clk_hw *hw)
 	       REG_PCI_CONTROL_PERSTOUT;
 	val = readl(np_base + REG_PCI_CONTROL);
 	writel(val | mask, np_base + REG_PCI_CONTROL);
-	msleep(250);
 
 	return 0;
 }

drivers/pci/controller/pcie-mediatek-gen3.c

@@ -974,6 +974,13 @@ static int mtk_pcie_en7581_power_up(struct mtk_gen3_pcie *pcie)
 		goto err_clk_prepare_enable;
 	}
 
+	/*
+	 * Airoha EN7581 performs PCIe reset via clk callbacks since it has a
+	 * hw issue with PCIE_PE_RSTB signal. Add wait for the time needed to
+	 * complete the PCIe reset.
+	 */
+	msleep(PCIE_T_PVPERL_MS);
+
 	return 0;
 
 err_clk_prepare_enable: