arm64: dts: imx8mp-tqma8mpql: remove virtual 3.3V regulator

BUCK4 rail supplies the 3.3V rail. Use the actual regulator
instead of a virtual fixed regulator.

Signed-off-by: Markus Niebel <Markus.Niebel@ew.tq-group.com>
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

Author: tq-niebelm

arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql.dtsi

@@ -16,15 +16,6 @@
 		reg = <0x0 0x40000000 0 0x80000000>;
 	};
 
-	/* identical to buck4_reg, but should never change */
-	reg_vcc3v3: regulator-vcc3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "VCC3V3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
 	reg_usdhc2_vqmmc: regulator-usdhc2-vqmmc {
 		compatible = "regulator-gpio";
 		pinctrl-names = "default";
@@ -187,14 +178,14 @@
 		read-only;
 		reg = <0x53>;
 		pagesize = <16>;
-		vcc-supply = <&reg_vcc3v3>;
+		vcc-supply = <&buck4_reg>;
 	};
 
 	m24c64: eeprom@57 {
 		compatible = "atmel,24c64";
 		reg = <0x57>;
 		pagesize = <32>;
-		vcc-supply = <&reg_vcc3v3>;
+		vcc-supply = <&buck4_reg>;
 	};
 };
 
@@ -211,7 +202,7 @@
 	non-removable;
 	no-sd;
 	no-sdio;
-	vmmc-supply = <&reg_vcc3v3>;
+	vmmc-supply = <&buck4_reg>;
 	vqmmc-supply = <&buck5_reg>;
 	status = "okay";
 };