Merge tag 'pwm/for-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm

Pull pwm updates from Thierry Reding:
 "Nothing too exciting for this cycle. A couple of fixes across the
  board, and Lee volunteered to help with patch review"

* tag 'pwm/for-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm:
  pwm: Add missing "CONFIG_" prefix
  MAINTAINERS: Add Lee Jones as reviewer for the PWM subsystem
  pwm: imx27: Fix rounding behavior
  pwm: rockchip: Simplify rockchip_pwm_get_state()
  pwm: img: Call pm_runtime_put() in pm_runtime_get_sync() failed case
  pwm: tegra: Support dynamic clock frequency configuration
  pwm: jz4740: Add support for the JZ4725B
  pwm: jz4740: Make PWM start with the active part
  pwm: jz4740: Enhance precision in calculation of duty cycle
  pwm: jz4740: Drop dependency on MACH_INGENIC
  pwm: lpss: Fix get_state runtime-pm reference handling
  pwm: sun4i: Support direct clock output on Allwinner A64
  pwm: Add support for Azoteq IQS620A PWM generator
  dt-bindings: pwm: rcar: add r8a77961 support
  pwm: Add missing '\n' in log messages

Author: torvalds

Documentation/devicetree/bindings/pwm/renesas,pwm-rcar.yaml

@@ -27,6 +27,7 @@ properties:
           - renesas,pwm-r8a7794   # R-Car E2
           - renesas,pwm-r8a7795   # R-Car H3
           - renesas,pwm-r8a7796   # R-Car M3-W
+          - renesas,pwm-r8a77961  # R-Car M3-W+
           - renesas,pwm-r8a77965  # R-Car M3-N
           - renesas,pwm-r8a77970  # R-Car V3M
           - renesas,pwm-r8a77980  # R-Car V3H

MAINTAINERS

@@ -13919,6 +13919,7 @@ F:	drivers/media/rc/pwm-ir-tx.c
 PWM SUBSYSTEM
 M:	Thierry Reding <thierry.reding@gmail.com>
 R:	Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
+M:	Lee Jones <lee.jones@linaro.org>
 L:	linux-pwm@vger.kernel.org
 S:	Maintained
 Q:	https://patchwork.ozlabs.org/project/linux-pwm/list/

drivers/pwm/Kconfig

@@ -232,9 +232,19 @@ config PWM_IMX_TPM
 	  To compile this driver as a module, choose M here: the module
 	  will be called pwm-imx-tpm.
 
+config PWM_IQS620A
+	tristate "Azoteq IQS620A PWM support"
+	depends on MFD_IQS62X || COMPILE_TEST
+	help
+	  Generic PWM framework driver for the Azoteq IQS620A multi-function
+	  sensor.
+
+	  To compile this driver as a module, choose M here: the module will
+	  be called pwm-iqs620a.
+
 config PWM_JZ4740
 	tristate "Ingenic JZ47xx PWM support"
-	depends on MACH_INGENIC
+	depends on MIPS
 	depends on COMMON_CLK
 	select MFD_SYSCON
 	help

drivers/pwm/Makefile

@@ -20,6 +20,7 @@ obj-$(CONFIG_PWM_IMG)		+= pwm-img.o
 obj-$(CONFIG_PWM_IMX1)		+= pwm-imx1.o
 obj-$(CONFIG_PWM_IMX27)		+= pwm-imx27.o
 obj-$(CONFIG_PWM_IMX_TPM)	+= pwm-imx-tpm.o
+obj-$(CONFIG_PWM_IQS620A)	+= pwm-iqs620a.o
 obj-$(CONFIG_PWM_JZ4740)	+= pwm-jz4740.o
 obj-$(CONFIG_PWM_LP3943)	+= pwm-lp3943.o
 obj-$(CONFIG_PWM_LPC18XX_SCT)	+= pwm-lpc18xx-sct.o

drivers/pwm/core.c

@@ -121,7 +121,7 @@ static int pwm_device_request(struct pwm_device *pwm, const char *label)
 		pwm->chip->ops->get_state(pwm->chip, pwm, &pwm->state);
 		trace_pwm_get(pwm, &pwm->state);
 
-		if (IS_ENABLED(PWM_DEBUG))
+		if (IS_ENABLED(CONFIG_PWM_DEBUG))
 			pwm->last = pwm->state;
 	}
 
@@ -537,7 +537,7 @@ static void pwm_apply_state_debug(struct pwm_device *pwm,
 
 	if (!state->enabled && s2.enabled && s2.duty_cycle > 0)
 		dev_warn(chip->dev,
-			 "requested disabled, but yielded enabled with duty > 0");
+			 "requested disabled, but yielded enabled with duty > 0\n");
 
 	/* reapply the state that the driver reported being configured. */
 	err = chip->ops->apply(chip, pwm, &s1);

drivers/pwm/pwm-img.c

@@ -129,8 +129,10 @@ static int img_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
 	duty = DIV_ROUND_UP(timebase * duty_ns, period_ns);
 
 	ret = pm_runtime_get_sync(chip->dev);
-	if (ret < 0)
+	if (ret < 0) {
+		pm_runtime_put_autosuspend(chip->dev);
 		return ret;
+	}
 
 	val = img_pwm_readl(pwm_chip, PWM_CTRL_CFG);
 	val &= ~(PWM_CTRL_CFG_DIV_MASK << PWM_CTRL_CFG_DIV_SHIFT(pwm->hwpwm));
@@ -331,8 +333,10 @@ static int img_pwm_remove(struct platform_device *pdev)
 	int ret;
 
 	ret = pm_runtime_get_sync(&pdev->dev);
-	if (ret < 0)
+	if (ret < 0) {
+		pm_runtime_put(&pdev->dev);
 		return ret;
+	}
 
 	for (i = 0; i < pwm_chip->chip.npwm; i++) {
 		val = img_pwm_readl(pwm_chip, PWM_CTRL_CFG);

drivers/pwm/pwm-imx27.c

@@ -150,13 +150,12 @@ static void pwm_imx27_get_state(struct pwm_chip *chip,
 
 	prescaler = MX3_PWMCR_PRESCALER_GET(val);
 	pwm_clk = clk_get_rate(imx->clk_per);
-	pwm_clk = DIV_ROUND_CLOSEST_ULL(pwm_clk, prescaler);
 	val = readl(imx->mmio_base + MX3_PWMPR);
 	period = val >= MX3_PWMPR_MAX ? MX3_PWMPR_MAX : val;
 
 	/* PWMOUT (Hz) = PWMCLK / (PWMPR + 2) */
-	tmp = NSEC_PER_SEC * (u64)(period + 2);
-	state->period = DIV_ROUND_CLOSEST_ULL(tmp, pwm_clk);
+	tmp = NSEC_PER_SEC * (u64)(period + 2) * prescaler;
+	state->period = DIV_ROUND_UP_ULL(tmp, pwm_clk);
 
 	/*
 	 * PWMSAR can be read only if PWM is enabled. If the PWM is disabled,
@@ -167,8 +166,8 @@ static void pwm_imx27_get_state(struct pwm_chip *chip,
 	else
 		val = imx->duty_cycle;
 
-	tmp = NSEC_PER_SEC * (u64)(val);
-	state->duty_cycle = DIV_ROUND_CLOSEST_ULL(tmp, pwm_clk);
+	tmp = NSEC_PER_SEC * (u64)(val) * prescaler;
+	state->duty_cycle = DIV_ROUND_UP_ULL(tmp, pwm_clk);
 
 	pwm_imx27_clk_disable_unprepare(imx);
 }
@@ -220,22 +219,23 @@ static int pwm_imx27_apply(struct pwm_chip *chip, struct pwm_device *pwm,
 	struct pwm_imx27_chip *imx = to_pwm_imx27_chip(chip);
 	struct pwm_state cstate;
 	unsigned long long c;
+	unsigned long long clkrate;
 	int ret;
 	u32 cr;
 
 	pwm_get_state(pwm, &cstate);
 
-	c = clk_get_rate(imx->clk_per);
-	c *= state->period;
+	clkrate = clk_get_rate(imx->clk_per);
+	c = clkrate * state->period;
 
-	do_div(c, 1000000000);
+	do_div(c, NSEC_PER_SEC);
 	period_cycles = c;
 
 	prescale = period_cycles / 0x10000 + 1;
 
 	period_cycles /= prescale;
-	c = (unsigned long long)period_cycles * state->duty_cycle;
-	do_div(c, state->period);
+	c = clkrate * state->duty_cycle;
+	do_div(c, NSEC_PER_SEC * prescale);
 	duty_cycles = c;
 
 	/*