Merge tag 'usb-6.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB driver fixes from Greg KH:
 "Here are a number of USB driver fixes and new device ids for 6.1-rc6.
  Included in here are:

   - new usb-serial device ids

   - dwc3 driver fixes for reported problems

   - cdns3 driver fixes

   - new USB device quirks

   - typec driver fixes

   - extcon USB typec driver fix

  All of these have been in linux-next with no reported issues"

* tag 'usb-6.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  USB: serial: option: add u-blox LARA-L6 modem
  USB: serial: option: add u-blox LARA-R6 00B modem
  USB: serial: option: remove old LARA-R6 PID
  USB: serial: option: add Fibocom FM160 0x0111 composition
  usb: add NO_LPM quirk for Realforce 87U Keyboard
  usb: cdns3: host: fix endless superspeed hub port reset
  usb: chipidea: fix deadlock in ci_otg_del_timer
  usb: dwc3: Do not get extcon device when usb-role-switch is used
  usb: typec: tipd: Prevent uninitialized event{1,2} in IRQ handler
  usb: typec: mux: Enter safe mode only when pins need to be reconfigured
  extcon: usbc-tusb320: Call the Type-C IRQ handler only if a port is registered
  Revert "usb: dwc3: disable USB core PHY management"
  usb: dwc3: gadget: Return -ESHUTDOWN on ep disable
  USB: bcma: Make GPIO explicitly optional
  USB: serial: option: add Sierra Wireless EM9191

Author: torvalds

drivers/extcon/extcon-usbc-tusb320.c

@@ -327,7 +327,13 @@ static irqreturn_t tusb320_irq_handler(int irq, void *dev_id)
 		return IRQ_NONE;
 
 	tusb320_extcon_irq_handler(priv, reg);
-	tusb320_typec_irq_handler(priv, reg);
+
+	/*
+	 * Type-C support is optional. Only call the Type-C handler if a
+	 * port had been registered previously.
+	 */
+	if (priv->port)
+		tusb320_typec_irq_handler(priv, reg);
 
 	regmap_write(priv->regmap, TUSB320_REG9, reg);
 

drivers/usb/cdns3/host.c

@@ -24,11 +24,37 @@
 #define CFG_RXDET_P3_EN		BIT(15)
 #define LPM_2_STB_SWITCH_EN	BIT(25)
 
-static int xhci_cdns3_suspend_quirk(struct usb_hcd *hcd);
+static void xhci_cdns3_plat_start(struct usb_hcd *hcd)
+{
+	struct xhci_hcd *xhci = hcd_to_xhci(hcd);
+	u32 value;
+
+	/* set usbcmd.EU3S */
+	value = readl(&xhci->op_regs->command);
+	value |= CMD_PM_INDEX;
+	writel(value, &xhci->op_regs->command);
+
+	if (hcd->regs) {
+		value = readl(hcd->regs + XECP_AUX_CTRL_REG1);
+		value |= CFG_RXDET_P3_EN;
+		writel(value, hcd->regs + XECP_AUX_CTRL_REG1);
+
+		value = readl(hcd->regs + XECP_PORT_CAP_REG);
+		value |= LPM_2_STB_SWITCH_EN;
+		writel(value, hcd->regs + XECP_PORT_CAP_REG);
+	}
+}
+
+static int xhci_cdns3_resume_quirk(struct usb_hcd *hcd)
+{
+	xhci_cdns3_plat_start(hcd);
+	return 0;
+}
 
 static const struct xhci_plat_priv xhci_plat_cdns3_xhci = {
 	.quirks = XHCI_SKIP_PHY_INIT | XHCI_AVOID_BEI,
-	.suspend_quirk = xhci_cdns3_suspend_quirk,
+	.plat_start = xhci_cdns3_plat_start,
+	.resume_quirk = xhci_cdns3_resume_quirk,
 };
 
 static int __cdns_host_init(struct cdns *cdns)
@@ -90,32 +116,6 @@ static int __cdns_host_init(struct cdns *cdns)
 	return ret;
 }
 
-static int xhci_cdns3_suspend_quirk(struct usb_hcd *hcd)
-{
-	struct xhci_hcd	*xhci = hcd_to_xhci(hcd);
-	u32 value;
-
-	if (pm_runtime_status_suspended(hcd->self.controller))
-		return 0;
-
-	/* set usbcmd.EU3S */
-	value = readl(&xhci->op_regs->command);
-	value |= CMD_PM_INDEX;
-	writel(value, &xhci->op_regs->command);
-
-	if (hcd->regs) {
-		value = readl(hcd->regs + XECP_AUX_CTRL_REG1);
-		value |= CFG_RXDET_P3_EN;
-		writel(value, hcd->regs + XECP_AUX_CTRL_REG1);
-
-		value = readl(hcd->regs + XECP_PORT_CAP_REG);
-		value |= LPM_2_STB_SWITCH_EN;
-		writel(value, hcd->regs + XECP_PORT_CAP_REG);
-	}
-
-	return 0;
-}
-
 static void cdns_host_exit(struct cdns *cdns)
 {
 	kfree(cdns->xhci_plat_data);

drivers/usb/chipidea/otg_fsm.c

@@ -256,8 +256,10 @@ static void ci_otg_del_timer(struct ci_hdrc *ci, enum otg_fsm_timer t)
 	ci->enabled_otg_timer_bits &= ~(1 << t);
 	if (ci->next_otg_timer == t) {
 		if (ci->enabled_otg_timer_bits == 0) {
+			spin_unlock_irqrestore(&ci->lock, flags);
 			/* No enabled timers after delete it */
 			hrtimer_cancel(&ci->otg_fsm_hrtimer);
+			spin_lock_irqsave(&ci->lock, flags);
 			ci->next_otg_timer = NUM_OTG_FSM_TIMERS;
 		} else {
 			/* Find the next timer */

drivers/usb/core/quirks.c

@@ -362,6 +362,9 @@ static const struct usb_device_id usb_quirk_list[] = {
 	{ USB_DEVICE(0x0781, 0x5583), .driver_info = USB_QUIRK_NO_LPM },
 	{ USB_DEVICE(0x0781, 0x5591), .driver_info = USB_QUIRK_NO_LPM },
 
+	/* Realforce 87U Keyboard */
+	{ USB_DEVICE(0x0853, 0x011b), .driver_info = USB_QUIRK_NO_LPM },
+
 	/* M-Systems Flash Disk Pioneers */
 	{ USB_DEVICE(0x08ec, 0x1000), .driver_info = USB_QUIRK_RESET_RESUME },
 

drivers/usb/dwc3/core.c

@@ -1710,6 +1710,16 @@ static struct extcon_dev *dwc3_get_extcon(struct dwc3 *dwc)
 	if (device_property_read_string(dev, "linux,extcon-name", &name) == 0)
 		return extcon_get_extcon_dev(name);
 
+	/*
+	 * Check explicitly if "usb-role-switch" is used since
+	 * extcon_find_edev_by_node() can not be used to check the absence of
+	 * an extcon device. In the absence of an device it will always return
+	 * EPROBE_DEFER.
+	 */
+	if (IS_ENABLED(CONFIG_USB_ROLE_SWITCH) &&
+	    device_property_read_bool(dev, "usb-role-switch"))
+		return NULL;
+
 	/*
 	 * Try to get an extcon device from the USB PHY controller's "port"
 	 * node. Check if it has the "port" node first, to avoid printing the

drivers/usb/dwc3/gadget.c

@@ -1029,7 +1029,7 @@ static int __dwc3_gadget_ep_disable(struct dwc3_ep *dep)
 		dep->endpoint.desc = NULL;
 	}
 
-	dwc3_remove_requests(dwc, dep, -ECONNRESET);
+	dwc3_remove_requests(dwc, dep, -ESHUTDOWN);
 
 	dep->stream_capable = false;
 	dep->type = 0;

drivers/usb/dwc3/host.c

@@ -11,13 +11,8 @@
 #include <linux/of.h>
 #include <linux/platform_device.h>
 
-#include "../host/xhci-plat.h"
 #include "core.h"
 
-static const struct xhci_plat_priv dwc3_xhci_plat_priv = {
-	.quirks = XHCI_SKIP_PHY_INIT,
-};
-
 static void dwc3_host_fill_xhci_irq_res(struct dwc3 *dwc,
 					int irq, char *name)
 {
@@ -97,11 +92,6 @@ int dwc3_host_init(struct dwc3 *dwc)
 		goto err;
 	}
 
-	ret = platform_device_add_data(xhci, &dwc3_xhci_plat_priv,
-					sizeof(dwc3_xhci_plat_priv));
-	if (ret)
-		goto err;
-
 	memset(props, 0, sizeof(struct property_entry) * ARRAY_SIZE(props));
 
 	if (dwc->usb3_lpm_capable)

drivers/usb/host/bcma-hcd.c

@@ -285,7 +285,7 @@ static void bcma_hci_platform_power_gpio(struct bcma_device *dev, bool val)
 {
 	struct bcma_hcd_device *usb_dev = bcma_get_drvdata(dev);
 
-	if (IS_ERR_OR_NULL(usb_dev->gpio_desc))
+	if (!usb_dev->gpio_desc)
 		return;
 
 	gpiod_set_value(usb_dev->gpio_desc, val);
@@ -406,9 +406,11 @@ static int bcma_hcd_probe(struct bcma_device *core)
 		return -ENOMEM;
 	usb_dev->core = core;
 
-	if (core->dev.of_node)
-		usb_dev->gpio_desc = devm_gpiod_get(&core->dev, "vcc",
-						    GPIOD_OUT_HIGH);
+	usb_dev->gpio_desc = devm_gpiod_get_optional(&core->dev, "vcc",
+						     GPIOD_OUT_HIGH);
+	if (IS_ERR(usb_dev->gpio_desc))
+		return dev_err_probe(&core->dev, PTR_ERR(usb_dev->gpio_desc),
+				     "error obtaining VCC GPIO");
 
 	switch (core->id.id) {
 	case BCMA_CORE_USB20_HOST:

drivers/usb/serial/option.c

@@ -162,6 +162,8 @@ static void option_instat_callback(struct urb *urb);
 #define NOVATELWIRELESS_PRODUCT_G2		0xA010
 #define NOVATELWIRELESS_PRODUCT_MC551		0xB001
 
+#define UBLOX_VENDOR_ID				0x1546
+
 /* AMOI PRODUCTS */
 #define AMOI_VENDOR_ID				0x1614
 #define AMOI_PRODUCT_H01			0x0800
@@ -240,7 +242,6 @@ static void option_instat_callback(struct urb *urb);
 #define QUECTEL_PRODUCT_UC15			0x9090
 /* These u-blox products use Qualcomm's vendor ID */
 #define UBLOX_PRODUCT_R410M			0x90b2
-#define UBLOX_PRODUCT_R6XX			0x90fa
 /* These Yuga products use Qualcomm's vendor ID */
 #define YUGA_PRODUCT_CLM920_NC5			0x9625
 
@@ -581,6 +582,9 @@ static void option_instat_callback(struct urb *urb);
 #define OPPO_VENDOR_ID				0x22d9
 #define OPPO_PRODUCT_R11			0x276c
 
+/* Sierra Wireless products */
+#define SIERRA_VENDOR_ID			0x1199
+#define SIERRA_PRODUCT_EM9191			0x90d3
 
 /* Device flags */
 
@@ -1124,8 +1128,16 @@ static const struct usb_device_id option_ids[] = {
 	/* u-blox products using Qualcomm vendor ID */
 	{ USB_DEVICE(QUALCOMM_VENDOR_ID, UBLOX_PRODUCT_R410M),
 	  .driver_info = RSVD(1) | RSVD(3) },
-	{ USB_DEVICE(QUALCOMM_VENDOR_ID, UBLOX_PRODUCT_R6XX),
+	{ USB_DEVICE(QUALCOMM_VENDOR_ID, 0x908b),	/* u-blox LARA-R6 00B */
+	  .driver_info = RSVD(4) },
+	{ USB_DEVICE(QUALCOMM_VENDOR_ID, 0x90fa),
 	  .driver_info = RSVD(3) },
+	/* u-blox products */
+	{ USB_DEVICE(UBLOX_VENDOR_ID, 0x1341) },	/* u-blox LARA-L6 */
+	{ USB_DEVICE(UBLOX_VENDOR_ID, 0x1342),		/* u-blox LARA-L6 (RMNET) */
+	  .driver_info = RSVD(4) },
+	{ USB_DEVICE(UBLOX_VENDOR_ID, 0x1343),		/* u-blox LARA-L6 (ECM) */
+	  .driver_info = RSVD(4) },
 	/* Quectel products using Quectel vendor ID */
 	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EC21, 0xff, 0xff, 0xff),
 	  .driver_info = NUMEP2 },
@@ -2167,6 +2179,7 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x010a, 0xff) },			/* Fibocom MA510 (ECM mode) */
 	{ USB_DEVICE_AND_INTERFACE_INFO(0x2cb7, 0x010b, 0xff, 0xff, 0x30) },	/* Fibocom FG150 Diag */
 	{ USB_DEVICE_AND_INTERFACE_INFO(0x2cb7, 0x010b, 0xff, 0, 0) },		/* Fibocom FG150 AT */
+	{ USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x0111, 0xff) },			/* Fibocom FM160 (MBIM mode) */
 	{ USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x01a0, 0xff) },			/* Fibocom NL668-AM/NL652-EU (laptop MBIM) */
 	{ USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x01a2, 0xff) },			/* Fibocom FM101-GL (laptop MBIM) */
 	{ USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x01a4, 0xff),			/* Fibocom FM101-GL (laptop MBIM) */
@@ -2176,6 +2189,8 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE_INTERFACE_CLASS(0x305a, 0x1405, 0xff) },			/* GosunCn GM500 MBIM */
 	{ USB_DEVICE_INTERFACE_CLASS(0x305a, 0x1406, 0xff) },			/* GosunCn GM500 ECM/NCM */
 	{ USB_DEVICE_AND_INTERFACE_INFO(OPPO_VENDOR_ID, OPPO_PRODUCT_R11, 0xff, 0xff, 0x30) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(SIERRA_VENDOR_ID, SIERRA_PRODUCT_EM9191, 0xff, 0xff, 0x30) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(SIERRA_VENDOR_ID, SIERRA_PRODUCT_EM9191, 0xff, 0, 0) },
 	{ } /* Terminating entry */
 };
 MODULE_DEVICE_TABLE(usb, option_ids);

drivers/usb/typec/mux/intel_pmc_mux.c

@@ -369,13 +369,24 @@ pmc_usb_mux_usb4(struct pmc_usb_port *port, struct typec_mux_state *state)
 	return pmc_usb_command(port, (void *)&req, sizeof(req));
 }
 
-static int pmc_usb_mux_safe_state(struct pmc_usb_port *port)
+static int pmc_usb_mux_safe_state(struct pmc_usb_port *port,
+				  struct typec_mux_state *state)
 {
 	u8 msg;
 
 	if (IOM_PORT_ACTIVITY_IS(port->iom_status, SAFE_MODE))
 		return 0;
 
+	if ((IOM_PORT_ACTIVITY_IS(port->iom_status, DP) ||
+	     IOM_PORT_ACTIVITY_IS(port->iom_status, DP_MFD)) &&
+	     state->alt && state->alt->svid == USB_TYPEC_DP_SID)
+		return 0;
+
+	if ((IOM_PORT_ACTIVITY_IS(port->iom_status, TBT) ||
+	     IOM_PORT_ACTIVITY_IS(port->iom_status, ALT_MODE_TBT_USB)) &&
+	     state->alt && state->alt->svid == USB_TYPEC_TBT_SID)
+		return 0;
+
 	msg = PMC_USB_SAFE_MODE;
 	msg |= port->usb3_port << PMC_USB_MSG_USB3_PORT_SHIFT;
 
@@ -443,7 +454,7 @@ pmc_usb_mux_set(struct typec_mux_dev *mux, struct typec_mux_state *state)
 		return 0;
 
 	if (state->mode == TYPEC_STATE_SAFE)
-		return pmc_usb_mux_safe_state(port);
+		return pmc_usb_mux_safe_state(port, state);
 	if (state->mode == TYPEC_STATE_USB)
 		return pmc_usb_connect(port, port->role);