x86/early_printk: Use 'mmio32' for consistency, fix comments

First of all, using 'mmio' prevents proper implementation of 8-bit accessors.
Second, it's simply inconsistent with uart8250 set of options. Rename it to
'mmio32'. While at it, remove rather misleading comment in the documentation.
From now on mmio32 is self-explanatory and pciserial supports not only 32-bit
MMIO accessors.

Also, while at it, fix the comment for the "pciserial" case. The comment
seems to be a copy'n'paste error when mentioning "serial" instead of
"pciserial" (with double quotes). Fix this.

With that, move it upper, so we don't calculate 'buf' twice.

Fixes: 3181424 ("x86/early_printk: Add support for MMIO-based UARTs")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Denis Mukhin <dmukhin@ford.com>
Link: https://lore.kernel.org/r/20250407172214.792745-1-andriy.shevchenko@linux.intel.com

Author: andy-shev

Documentation/admin-guide/kernel-parameters.txt

@@ -1407,18 +1407,15 @@
 			earlyprintk=serial[,0x...[,baudrate]]
 			earlyprintk=ttySn[,baudrate]
 			earlyprintk=dbgp[debugController#]
+			earlyprintk=mmio32,membase[,{nocfg|baudrate}]
 			earlyprintk=pciserial[,force],bus:device.function[,{nocfg|baudrate}]
 			earlyprintk=xdbc[xhciController#]
 			earlyprintk=bios
-			earlyprintk=mmio,membase[,{nocfg|baudrate}]
 
 			earlyprintk is useful when the kernel crashes before
 			the normal console is initialized. It is not enabled by
 			default because it has some cosmetic problems.
 
-			Only 32-bit memory addresses are supported for "mmio"
-			and "pciserial" devices.
-
 			Use "nocfg" to skip UART configuration, assume
 			BIOS/firmware has configured UART correctly.
 

arch/x86/kernel/early_printk.c

@@ -389,10 +389,10 @@ static int __init setup_early_printk(char *buf)
 	keep = (strstr(buf, "keep") != NULL);
 
 	while (*buf != '\0') {
-		if (!strncmp(buf, "mmio", 4)) {
-			early_mmio_serial_init(buf + 4);
+		if (!strncmp(buf, "mmio32", 6)) {
+			buf += 6;
+			early_mmio_serial_init(buf);
 			early_console_register(&early_serial_console, keep);
-			buf += 4;
 		}
 		if (!strncmp(buf, "serial", 6)) {
 			buf += 6;
@@ -407,9 +407,9 @@ static int __init setup_early_printk(char *buf)
 		}
 #ifdef CONFIG_PCI
 		if (!strncmp(buf, "pciserial", 9)) {
-			early_pci_serial_init(buf + 9);
+			buf += 9; /* Keep from match the above "pciserial" */
+			early_pci_serial_init(buf);
 			early_console_register(&early_serial_console, keep);
-			buf += 9; /* Keep from match the above "serial" */
 		}
 #endif
 		if (!strncmp(buf, "vga", 3) &&