Merge branches 'clk-mvebu', 'clk-const', 'clk-imx' and 'clk-rockchip' into clk-next

 - Mark mux table as const in clk-mux
 - Make the all_lists array const

* clk-mvebu:
  clk: mvebu: use time_is_before_eq_jiffies() instead of open coding it

* clk-const:
  clk: Mark clk_core_evict_parent_cache_subtree() 'target' const
  clk: Mark 'all_lists' as const
  clk: pistachio: Declare mux table as const u32[]
  clk: qcom: Declare mux table as const u32[]
  clk: mmp: Declare mux tables as const u32[]
  clk: hisilicon: Remove unnecessary cast of mux table to u32 *
  clk: mux: Declare u32 *table parameter as const
  clk: nxp: Declare mux table parameter as const u32 *
  clk: nxp: Remove unused variable

* clk-imx: (28 commits)
  dt-bindings: clock: drop useless consumer example
  clk: imx: Select MXC_CLK for i.MX93 clock driver
  clk: imx: remove redundant re-assignment of pll->base
  MAINTAINERS: clk: imx: add git tree and dt-bindings files
  clk: imx: pll14xx: Support dynamic rates
  clk: imx: pll14xx: Add pr_fmt
  clk: imx: pll14xx: explicitly return lowest rate
  clk: imx: pll14xx: name variables after usage
  clk: imx: pll14xx: consolidate rate calculation
  clk: imx: pll14xx: Use FIELD_GET/FIELD_PREP
  clk: imx: pll14xx: Drop wrong shifting
  clk: imx: pll14xx: Use register defines consistently
  clk: imx8mp: remove SYS PLL 1/2 clock gates
  clk: imx8mn: remove SYS PLL 1/2 clock gates
  clk: imx8mm: remove SYS PLL 1/2 clock gates
  clk: imx: add i.MX93 clk
  clk: imx: support fracn gppll
  clk: imx: add i.MX93 composite clk
  dt-bindings: clock: add i.MX93 clock definition
  dt-bindings: clock: Add imx93 clock support
  ...

* clk-rockchip:
  clk: rockchip: re-add rational best approximation algorithm to the fractional divider
  clk/rockchip: Use of_device_get_match_data()
  clk: rockchip: Add CLK_SET_RATE_PARENT to the HDMI reference clock on rk3568
  clk: rockchip: drop CLK_SET_RATE_PARENT from dclk_vop* on rk3568
  clk: rockchip: Add more PLL rates for rk3568

Author: bebarino

Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt

@@ -86,6 +86,7 @@ This binding uses the common clock binding[1].
 
 Required properties:
 - compatible:		Should be one of:
+			  "fsl,imx8dxl-clk"
 			  "fsl,imx8qm-clk"
 			  "fsl,imx8qxp-clk"
 			followed by "fsl,scu-clk"

Documentation/devicetree/bindings/clock/bitmain,bm1880-clk.yaml

@@ -61,16 +61,4 @@ examples:
         #clock-cells = <1>;
     };
 
-  # Example UART controller node that consumes clock generated by the clock controller:
-  - |
-    uart0: serial@58018000 {
-         compatible = "snps,dw-apb-uart";
-         reg = <0x58018000 0x2000>;
-         clocks = <&clk 45>, <&clk 46>;
-         clock-names = "baudclk", "apb_pclk";
-         interrupts = <0 9 4>;
-         reg-shift = <2>;
-         reg-io-width = <4>;
-    };
-
 ...

Documentation/devicetree/bindings/clock/idt,versaclock5.yaml

@@ -191,11 +191,4 @@ examples:
         };
     };
 
-    /* Consumer referencing the 5P49V5923 pin OUT1 */
-    consumer {
-        /* ... */
-        clocks = <&vc5 1>;
-        /* ... */
-    };
-
 ...

Documentation/devicetree/bindings/clock/imx1-clock.yaml

@@ -40,12 +40,3 @@ examples:
         compatible = "fsl,imx1-ccm";
         reg = <0x0021b000 0x1000>;
     };
-
-    pwm@208000 {
-        #pwm-cells = <2>;
-        compatible = "fsl,imx1-pwm";
-        reg = <0x00208000 0x1000>;
-        interrupts = <34>;
-        clocks = <&clks IMX1_CLK_DUMMY>, <&clks IMX1_CLK_PER1>;
-        clock-names = "ipg", "per";
-    };

Documentation/devicetree/bindings/clock/imx21-clock.yaml

@@ -40,12 +40,3 @@ examples:
         reg = <0x10027000 0x800>;
         #clock-cells = <1>;
     };
-
-    serial@1000a000 {
-        compatible = "fsl,imx21-uart";
-        reg = <0x1000a000 0x1000>;
-        interrupts = <20>;
-        clocks = <&clks IMX21_CLK_UART1_IPG_GATE>,
-                 <&clks IMX21_CLK_PER1>;
-        clock-names = "ipg", "per";
-    };

Documentation/devicetree/bindings/clock/imx23-clock.yaml

@@ -83,12 +83,3 @@ examples:
         reg = <0x80040000 0x2000>;
         #clock-cells = <1>;
     };
-
-    serial@8006c000 {
-        compatible = "fsl,imx23-auart";
-        reg = <0x8006c000 0x2000>;
-        interrupts = <24>;
-        clocks = <&clks 32>;
-        dmas = <&dma_apbx 6>, <&dma_apbx 7>;
-        dma-names = "rx", "tx";
-    };

Documentation/devicetree/bindings/clock/imx25-clock.yaml

@@ -176,11 +176,3 @@ examples:
         interrupts = <31>;
         #clock-cells = <1>;
     };
-
-    serial@43f90000 {
-        compatible = "fsl,imx25-uart", "fsl,imx21-uart";
-        reg = <0x43f90000 0x4000>;
-        interrupts = <45>;
-        clocks = <&clks 79>, <&clks 50>;
-        clock-names = "ipg", "per";
-    };

Documentation/devicetree/bindings/clock/imx27-clock.yaml

@@ -44,12 +44,3 @@ examples:
         interrupts = <31>;
         #clock-cells = <1>;
     };
-
-    serial@1000a000 {
-        compatible = "fsl,imx27-uart", "fsl,imx21-uart";
-        reg = <0x1000a000 0x1000>;
-        interrupts = <20>;
-        clocks = <&clks IMX27_CLK_UART1_IPG_GATE>,
-                 <&clks IMX27_CLK_PER1_GATE>;
-        clock-names = "ipg", "per";
-    };

Documentation/devicetree/bindings/clock/imx28-clock.yaml

@@ -106,12 +106,3 @@ examples:
         reg = <0x80040000 0x2000>;
         #clock-cells = <1>;
     };
-
-    serial@8006a000 {
-        compatible = "fsl,imx28-auart";
-        reg = <0x8006a000 0x2000>;
-        interrupts = <112>;
-        dmas = <&dma_apbx 8>, <&dma_apbx 9>;
-        dma-names = "rx", "tx";
-        clocks = <&clks 45>;
-    };

Documentation/devicetree/bindings/clock/imx31-clock.yaml

@@ -110,11 +110,3 @@ examples:
         interrupts = <31>, <53>;
         #clock-cells = <1>;
     };
-
-    serial@43f90000 {
-        compatible = "fsl,imx31-uart", "fsl,imx21-uart";
-        reg = <0x43f90000 0x4000>;
-        interrupts = <45>;
-        clocks = <&clks 10>, <&clks 30>;
-        clock-names = "ipg", "per";
-    };