Merge tag 'linux-watchdog-5.14-rc1' of git://www.linux-watchdog.org/linux-watchdog

Pull watchdog updates from Wim Van Sebroeck:

 - Add Mstar MSC313e WDT driver

 - Add support for sama7g5-wdt

 - Add compatible for SC7280 SoC

 - Add compatible for Mediatek MT8195

 - sbsa: Support architecture version 1

 - Removal of the MV64x60 watchdog driver

 - Extra PCI IDs for hpwdt

 - Add hrtimer-based pretimeout feature

 - Add {min,max}_timeout sysfs nodes

 - keembay timeout and pre-timeout handling

 - Several fixes, cleanups and improvements

* tag 'linux-watchdog-5.14-rc1' of git://www.linux-watchdog.org/linux-watchdog: (56 commits)
  watchdog: iTCO_wdt: use dev_err() instead of pr_err()
  watchdog: Add Mstar MSC313e WDT driver
  dt-bindings: watchdog: Add Mstar MSC313e WDT devicetree bindings documentation
  watchdog: iTCO_wdt: Account for rebooting on second timeout
  dt-bindings: watchdog: Convert arm,sbsa-gwdt to DT schema
  dt-bindings: watchdog: sama5d4-wdt: add compatible for sama7g5-wdt
  watchdog: sama5d4_wdt: add support for sama7g5-wdt
  dt-bindings: watchdog: sama5d4-wdt: convert to yaml
  watchdog: ziirave_wdt: Remove VERSION_FMT defines and add sysfs newlines
  dt-bindings: watchdog: Add compatible for Mediatek MT8195
  dt-bindings: watchdog: dw-wdt: add description for rk3568
  watchdog: imx_sc_wdt: fix pretimeout
  watchdog: diag288_wdt: Remove redundant assignment
  watchdog: Add hrtimer-based pretimeout feature
  dt-bindings: watchdog: Add compatible for SC7280 SoC
  watchdog: qcom: Move suspend/resume to suspend_late/resume_early
  watchdog: Fix a typo in the file orion_wdt.c
  watchdog: jz4740: Fix return value check in jz4740_wdt_probe()
  watchdog: Remove MV64x60 watchdog driver
  doc: mtk-wdt: support pre-timeout when the bark irq is available
  ...

Author: torvalds

Documentation/devicetree/bindings/watchdog/atmel,sama5d4-wdt.yaml

@@ -0,0 +1,74 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/watchdog/atmel,sama5d4-wdt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Atmel SAMA5D4 Watchdog Timer (WDT) Controller
+
+maintainers:
+  - Eugen Hristev <eugen.hristev@microchip.com>
+
+allOf:
+  - $ref: "watchdog.yaml#"
+
+properties:
+  compatible:
+    enum:
+      - atmel,sama5d4-wdt
+      - microchip,sam9x60-wdt
+      - microchip,sama7g5-wdt
+
+  reg:
+    maxItems: 1
+
+  atmel,watchdog-type:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: should be hardware or software.
+    oneOf:
+      - description:
+          Enable watchdog fault reset. A watchdog fault triggers
+          watchdog reset.
+        const: hardware
+      - description:
+          Enable watchdog fault interrupt. A watchdog fault asserts
+          watchdog interrupt.
+        const: software
+    default: hardware
+
+  atmel,idle-halt:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: |
+      present if you want to stop the watchdog when the CPU is in idle state.
+      CAUTION: This property should be used with care, it actually makes the
+      watchdog not counting when the CPU is in idle state, therefore the
+      watchdog reset time depends on mean CPU usage and will not reset at all
+      if the CPU stop working while it is in idle state, which is probably
+      not what you want.
+
+  atmel,dbg-halt:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: |
+      present if you want to stop the watchdog when the CPU is in debug state.
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    watchdog@fc068640 {
+      compatible = "atmel,sama5d4-wdt";
+      reg = <0xfc068640 0x10>;
+      interrupts = <4 IRQ_TYPE_LEVEL_HIGH 5>;
+      timeout-sec = <10>;
+      atmel,watchdog-type = "hardware";
+      atmel,dbg-halt;
+      atmel,idle-halt;
+    };
+
+...

Documentation/devicetree/bindings/watchdog/atmel-sama5d4-wdt.txt

@@ -0,0 +1,40 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/watchdog/mstar,msc313e-wdt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MStar Watchdog Device Tree Bindings
+
+maintainers:
+  - Daniel Palmer <daniel@0x0f.com>
+  - Romain Perier <romain.perier@gmail.com>
+
+allOf:
+  - $ref: watchdog.yaml#
+
+properties:
+  compatible:
+    enum:
+      - mstar,msc313e-wdt
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - clocks
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    watchdog@6000 {
+        compatible = "mstar,msc313e-wdt";
+        reg = <0x6000 0x1f>;
+        clocks = <&xtal_div2>;
+    };

Documentation/devicetree/bindings/watchdog/mstar,msc313e-wdt.yaml

@@ -1,5 +1,8 @@
 Mediatek SoCs Watchdog timer
 
+The watchdog supports a pre-timeout interrupt that fires timeout-sec/2
+before the expiry.
+
 Required properties:
 
 - compatible should contain:
@@ -13,10 +16,12 @@ Required properties:
 	"mediatek,mt8183-wdt": for MT8183
 	"mediatek,mt8516-wdt", "mediatek,mt6589-wdt": for MT8516
 	"mediatek,mt8192-wdt": for MT8192
+	"mediatek,mt8195-wdt", "mediatek,mt6589-wdt": for MT8195
 
 - reg : Specifies base physical address and size of the registers.
 
 Optional properties:
+- interrupts: Watchdog pre-timeout (bark) interrupt.
 - timeout-sec: contains the watchdog timeout in seconds.
 - #reset-cells: Should be 1.
 
@@ -26,6 +31,7 @@ watchdog: watchdog@10007000 {
 	compatible = "mediatek,mt8183-wdt",
 		     "mediatek,mt6589-wdt";
 	reg = <0 0x10007000 0 0x100>;
+	interrupts = <GIC_SPI 139 IRQ_TYPE_NONE>;
 	timeout-sec = <10>;
 	#reset-cells = <1>;
 };

Documentation/devicetree/bindings/watchdog/mtk-wdt.txt

@@ -17,6 +17,7 @@ properties:
     enum:
       - qcom,apss-wdt-qcs404
       - qcom,apss-wdt-sc7180
+      - qcom,apss-wdt-sc7280
       - qcom,apss-wdt-sdm845
       - qcom,apss-wdt-sdx55
       - qcom,apss-wdt-sm8150

Documentation/devicetree/bindings/watchdog/qcom-wdt.yaml

@@ -27,6 +27,7 @@ properties:
               - rockchip,rk3328-wdt
               - rockchip,rk3368-wdt
               - rockchip,rk3399-wdt
+              - rockchip,rk3568-wdt
               - rockchip,rv1108-wdt
           - const: snps,dw-wdt
 

Documentation/devicetree/bindings/watchdog/snps,dw-wdt.yaml

@@ -2217,6 +2217,7 @@ F:	arch/arm/boot/dts/mstar-*
 F:	arch/arm/mach-mstar/
 F:	drivers/clk/mstar/
 F:	drivers/gpio/gpio-msc313.c
+F:	drivers/watchdog/msc313e_wdt.c
 F:	include/dt-bindings/clock/mstar-*
 F:	include/dt-bindings/gpio/msc313-gpio.h
 

MAINTAINERS

@@ -22,9 +22,9 @@ menuconfig WATCHDOG
 
 	  The watchdog is usually used together with the watchdog daemon
 	  which is available from
-	  <ftp://ibiblio.org/pub/Linux/system/daemons/watchdog/>. This daemon can
-	  also monitor NFS connections and can reboot the machine when the process
-	  table is full.
+	  <https://ibiblio.org/pub/Linux/system/daemons/watchdog/>. This daemon
+	  can also monitor NFS connections and can reboot the machine when the
+	  process table is full.
 
 	  If unsure, say N.
 
@@ -73,6 +73,14 @@ config WATCHDOG_SYSFS
 	  Say Y here if you want to enable watchdog device status read through
 	  sysfs attributes.
 
+config WATCHDOG_HRTIMER_PRETIMEOUT
+	bool "Enable watchdog hrtimer-based pretimeouts"
+	help
+	  Enable this if you want to use a hrtimer timer based pretimeout for
+	  watchdogs that do not natively support pretimeout support. Be aware
+	  that because this pretimeout functionality uses hrtimers, it may not
+	  be able to fire before the actual watchdog fires in some situations.
+
 comment "Watchdog Pretimeout Governors"
 
 config WATCHDOG_PRETIMEOUT_GOV
@@ -302,7 +310,7 @@ config XILINX_WATCHDOG
 	depends on HAS_IOMEM
 	select WATCHDOG_CORE
 	help
-	  Watchdog driver for the xps_timebase_wdt ip core.
+	  Watchdog driver for the xps_timebase_wdt IP core.
 
 	  To compile this driver as a module, choose M here: the
 	  module will be called of_xilinx_wdt.
@@ -404,8 +412,8 @@ config ASM9260_WATCHDOG
 	select WATCHDOG_CORE
 	select RESET_CONTROLLER
 	help
-	  Watchdog timer embedded into Alphascale asm9260 chips. This will reboot your
-	  system when the timeout is reached.
+	  Watchdog timer embedded into Alphascale asm9260 chips. This will
+	  reboot your system when the timeout is reached.
 
 config AT91RM9200_WATCHDOG
 	tristate "AT91RM9200 watchdog"
@@ -548,8 +556,9 @@ config OMAP_WATCHDOG
 	depends on ARCH_OMAP16XX || ARCH_OMAP2PLUS || COMPILE_TEST
 	select WATCHDOG_CORE
 	help
-	  Support for TI OMAP1610/OMAP1710/OMAP2420/OMAP3430/OMAP4430 watchdog.  Say 'Y'
-	  here to enable the OMAP1610/OMAP1710/OMAP2420/OMAP3430/OMAP4430 watchdog timer.
+	  Support for TI OMAP1610/OMAP1710/OMAP2420/OMAP3430/OMAP4430 watchdog.
+	  Say 'Y' here to enable the
+	  OMAP1610/OMAP1710/OMAP2420/OMAP3430/OMAP4430 watchdog timer.
 
 config PNX4008_WATCHDOG
 	tristate "LPC32XX Watchdog"
@@ -980,6 +989,18 @@ config VISCONTI_WATCHDOG
 	  Say Y here to include support for the watchdog timer in Toshiba
 	  Visconti SoCs.
 
+config MSC313E_WATCHDOG
+	tristate "MStar MSC313e watchdog"
+	depends on ARCH_MSTARV7 || COMPILE_TEST
+	select WATCHDOG_CORE
+	help
+	  Say Y here to include support for the Watchdog timer embedded
+	  into MStar MSC313e chips. This will reboot your system when the
+	  timeout is reached.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called msc313e_wdt.
+
 # X86 (i386 + ia64 + x86_64) Architecture
 
 config ACQUIRE_WDT
@@ -1096,13 +1117,16 @@ config SBC_FITPC2_WATCHDOG
 	  This is the driver for the built-in watchdog timer on the fit-PC2,
 	  fit-PC2i, CM-iAM single-board computers made by Compulab.
 
-	  It`s possible to enable watchdog timer either from BIOS (F2) or from booted Linux.
-	  When "Watchdog Timer Value" enabled one can set 31-255 s operational range.
+	  It's possible to enable the watchdog timer either from BIOS (F2) or
+	  from booted Linux.
+	  When the "Watchdog Timer Value" is enabled one can set 31-255 seconds
+	  operational range.
 
-	  Entering BIOS setup temporary disables watchdog operation regardless to current state,
-	  so system will not be restarted while user in BIOS setup.
+	  Entering BIOS setup temporarily disables watchdog operation regardless
+	  of current state, so system will not be restarted while user is in
+	  BIOS setup.
 
-	  Once watchdog was enabled the system will be restarted every
+	  Once the watchdog is enabled the system will be restarted every
 	  "Watchdog Timer Value" period, so to prevent it user can restart or
 	  disable the watchdog.
 
@@ -1124,11 +1148,12 @@ config IB700_WDT
 	depends on X86
 	help
 	  This is the driver for the hardware watchdog on the IB700 Single
-	  Board Computer produced by TMC Technology (www.tmc-uk.com). This watchdog
-	  simply watches your kernel to make sure it doesn't freeze, and if
-	  it does, it reboots your computer after a certain amount of time.
+	  Board Computer produced by TMC Technology (www.tmc-uk.com). This
+	  watchdog simply watches your kernel to make sure it doesn't freeze,
+	  and if it does, it reboots your computer after a certain amount of time.
 
-	  This driver is like the WDT501 driver but for slightly different hardware.
+	  This driver is like the WDT501 driver but for slightly different
+	  hardware.
 
 	  To compile this driver as a module, choose M here: the
 	  module will be called ib700wdt.
@@ -1807,10 +1832,10 @@ config PIC32_DMT
 	select WATCHDOG_CORE
 	depends on MACH_PIC32 || (MIPS && COMPILE_TEST)
 	help
-	  Watchdog driver for PIC32 instruction fetch counting timer. This specific
-	  timer is typically be used in misson critical and safety critical
-	  applications, where any single failure of the software functionality
-	  and sequencing must be detected.
+	  Watchdog driver for PIC32 instruction fetch counting timer. This
+	  specific timer is typically be used in mission critical and safety
+	  critical applications, where any single failure of the software
+	  functionality and sequencing must be detected.
 
 	  To compile this driver as a loadable module, choose M here.
 	  The module will be called pic32-dmt.
@@ -1844,10 +1869,6 @@ config 8xxx_WDT
 
 	  For BookE processors (MPC85xx) use the BOOKE_WDT driver instead.
 
-config MV64X60_WDT
-	tristate "MV64X60 (Marvell Discovery) Watchdog Timer"
-	depends on MV64X60 || COMPILE_TEST
-
 config PIKA_WDT
 	tristate "PIKA FPGA Watchdog"
 	depends on WARP || (PPC64 && COMPILE_TEST)
@@ -2013,8 +2034,8 @@ config PCWATCHDOG
 	  This card simply watches your kernel to make sure it doesn't freeze,
 	  and if it does, it reboots your computer after a certain amount of
 	  time. This driver is like the WDT501 driver but for different
-	  hardware. Please read <file:Documentation/watchdog/pcwd-watchdog.rst>. The PC
-	  watchdog cards can be ordered from <http://www.berkprod.com/>.
+	  hardware. Please read <file:Documentation/watchdog/pcwd-watchdog.rst>.
+	  The PC watchdog cards can be ordered from <http://www.berkprod.com/>.
 
 	  To compile this driver as a module, choose M here: the
 	  module will be called pcwd.
@@ -2115,7 +2136,7 @@ config KEEMBAY_WATCHDOG
 	 This option enable support for an In-secure watchdog timer driver for
 	 Intel Keem Bay SoC. This WDT has a 32 bit timer and decrements in every
 	 count unit. An interrupt will be triggered, when the count crosses
-	 the thershold configured in the register.
+	 the threshold configured in the register.
 
 	 To compile this driver as a module, choose M here: the
 	 module will be called keembay_wdt.

drivers/watchdog/Kconfig

@@ -9,6 +9,7 @@ obj-$(CONFIG_WATCHDOG_CORE)	+= watchdog.o
 watchdog-objs	+= watchdog_core.o watchdog_dev.o
 
 watchdog-$(CONFIG_WATCHDOG_PRETIMEOUT_GOV)	+= watchdog_pretimeout.o
+watchdog-$(CONFIG_WATCHDOG_HRTIMER_PRETIMEOUT)	+= watchdog_hrtimer_pretimeout.o
 
 obj-$(CONFIG_WATCHDOG_PRETIMEOUT_GOV_NOOP)	+= pretimeout_noop.o
 obj-$(CONFIG_WATCHDOG_PRETIMEOUT_GOV_PANIC)	+= pretimeout_panic.o
@@ -92,6 +93,7 @@ obj-$(CONFIG_SPRD_WATCHDOG) += sprd_wdt.o
 obj-$(CONFIG_PM8916_WATCHDOG) += pm8916_wdt.o
 obj-$(CONFIG_ARM_SMC_WATCHDOG) += arm_smc_wdt.o
 obj-$(CONFIG_VISCONTI_WATCHDOG) += visconti_wdt.o
+obj-$(CONFIG_MSC313E_WATCHDOG) += msc313e_wdt.o
 
 # X86 (i386 + ia64 + x86_64) Architecture
 obj-$(CONFIG_ACQUIRE_WDT) += acquirewdt.o
@@ -175,7 +177,6 @@ obj-$(CONFIG_PIC32_DMT) += pic32-dmt.o
 # POWERPC Architecture
 obj-$(CONFIG_GEF_WDT) += gef_wdt.o
 obj-$(CONFIG_8xxx_WDT) += mpc8xxx_wdt.o
-obj-$(CONFIG_MV64X60_WDT) += mv64x60_wdt.o
 obj-$(CONFIG_PIKA_WDT) += pika_wdt.o
 obj-$(CONFIG_BOOKE_WDT) += booke_wdt.o
 obj-$(CONFIG_MEN_A21_WDT) += mena21_wdt.o