dmaengine: stm32-mdma: remove GISR1 register

GISR1 was described in a not up-to-date documentation when the stm32-mdma
driver has been developed. This register has not been added in reference
manual of STM32 SoC with MDMA, which have only 32 MDMA channels.
So remove it from stm32-mdma driver.

Fixes: a4ffb13 ("dmaengine: Add STM32 MDMA driver")
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Link: https://lore.kernel.org/r/20220504155322.121431-2-amelie.delaunay@foss.st.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>

Author: ADESTM

drivers/dma/stm32-mdma.c

@@ -34,7 +34,6 @@
 #include "virt-dma.h"
 
 #define STM32_MDMA_GISR0		0x0000 /* MDMA Int Status Reg 1 */
-#define STM32_MDMA_GISR1		0x0004 /* MDMA Int Status Reg 2 */
 
 /* MDMA Channel x interrupt/status register */
 #define STM32_MDMA_CISR(x)		(0x40 + 0x40 * (x)) /* x = 0..62 */
@@ -169,7 +168,7 @@
 
 #define STM32_MDMA_MAX_BUF_LEN		128
 #define STM32_MDMA_MAX_BLOCK_LEN	65536
-#define STM32_MDMA_MAX_CHANNELS		63
+#define STM32_MDMA_MAX_CHANNELS		32
 #define STM32_MDMA_MAX_REQUESTS		256
 #define STM32_MDMA_MAX_BURST		128
 #define STM32_MDMA_VERY_HIGH_PRIORITY	0x3
@@ -1324,21 +1323,11 @@ static irqreturn_t stm32_mdma_irq_handler(int irq, void *devid)
 
 	/* Find out which channel generates the interrupt */
 	status = readl_relaxed(dmadev->base + STM32_MDMA_GISR0);
-	if (status) {
-		id = __ffs(status);
-	} else {
-		status = readl_relaxed(dmadev->base + STM32_MDMA_GISR1);
-		if (!status) {
-			dev_dbg(mdma2dev(dmadev), "spurious it\n");
-			return IRQ_NONE;
-		}
-		id = __ffs(status);
-		/*
-		 * As GISR0 provides status for channel id from 0 to 31,
-		 * so GISR1 provides status for channel id from 32 to 62
-		 */
-		id += 32;
+	if (!status) {
+		dev_dbg(mdma2dev(dmadev), "spurious it\n");
+		return IRQ_NONE;
 	}
+	id = __ffs(status);
 
 	chan = &dmadev->chan[id];
 	if (!chan) {