net: bcmgenet: fix MoCA LED control

When the bcmgenet_mii_config() code was refactored it was missed
that the LED control for the MoCA interface got overwritten by
the port_ctrl value. Its previous programming is restored here.

Fixes: 4f8d81b ("net: bcmgenet: Refactor register access in bcmgenet_mii_config")
Signed-off-by: Doug Berger <opendmb@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Author: Doug Berger

drivers/net/ethernet/broadcom/genet/bcmmii.c

@@ -176,15 +176,6 @@ void bcmgenet_phy_power_set(struct net_device *dev, bool enable)
 
 static void bcmgenet_moca_phy_setup(struct bcmgenet_priv *priv)
 {
-	u32 reg;
-
-	if (!GENET_IS_V5(priv)) {
-		/* Speed settings are set in bcmgenet_mii_setup() */
-		reg = bcmgenet_sys_readl(priv, SYS_PORT_CTRL);
-		reg |= LED_ACT_SOURCE_MAC;
-		bcmgenet_sys_writel(priv, reg, SYS_PORT_CTRL);
-	}
-
 	if (priv->hw_params->flags & GENET_HAS_MOCA_LINK_DET)
 		fixed_phy_set_link_update(priv->dev->phydev,
 					  bcmgenet_fixed_phy_link_update);
@@ -217,6 +208,8 @@ int bcmgenet_mii_config(struct net_device *dev, bool init)
 
 		if (!phy_name) {
 			phy_name = "MoCA";
+			if (!GENET_IS_V5(priv))
+				port_ctrl |= LED_ACT_SOURCE_MAC;
 			bcmgenet_moca_phy_setup(priv);
 		}
 		break;