pinctrl: intel: Restore the pins that used to be in Direct IRQ mode

If the firmware mangled the register contents too much,
check the saved value for the Direct IRQ mode. If it
matches, we will restore the pin state.

Reported-by: Jim Minter <jimminter@microsoft.com>
Fixes: 6989ea4 ("pinctrl: intel: Save and restore pins in "direct IRQ" mode")
Tested-by: Jim Minter <jimminter@microsoft.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Link: https://lore.kernel.org/r/20230206141558.20916-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

Author: andy-shev

drivers/pinctrl/intel/pinctrl-intel.c

@@ -1709,6 +1709,12 @@ const struct intel_pinctrl_soc_data *intel_pinctrl_get_soc_data(struct platform_
 EXPORT_SYMBOL_GPL(intel_pinctrl_get_soc_data);
 
 #ifdef CONFIG_PM_SLEEP
+static bool __intel_gpio_is_direct_irq(u32 value)
+{
+	return (value & PADCFG0_GPIROUTIOXAPIC) && (value & PADCFG0_GPIOTXDIS) &&
+	       (__intel_gpio_get_gpio_mode(value) == PADCFG0_PMODE_GPIO);
+}
+
 static bool intel_pinctrl_should_save(struct intel_pinctrl *pctrl, unsigned int pin)
 {
 	const struct pin_desc *pd = pin_desc_get(pctrl->pctldev, pin);
@@ -1742,8 +1748,7 @@ static bool intel_pinctrl_should_save(struct intel_pinctrl *pctrl, unsigned int
 	 * See https://bugzilla.kernel.org/show_bug.cgi?id=214749.
 	 */
 	value = readl(intel_get_padcfg(pctrl, pin, PADCFG0));
-	if ((value & PADCFG0_GPIROUTIOXAPIC) && (value & PADCFG0_GPIOTXDIS) &&
-	    (__intel_gpio_get_gpio_mode(value) == PADCFG0_PMODE_GPIO))
+	if (__intel_gpio_is_direct_irq(value))
 		return true;
 
 	return false;
@@ -1873,7 +1878,12 @@ int intel_pinctrl_resume_noirq(struct device *dev)
 	for (i = 0; i < pctrl->soc->npins; i++) {
 		const struct pinctrl_pin_desc *desc = &pctrl->soc->pins[i];
 
-		if (!intel_pinctrl_should_save(pctrl, desc->number))
+		if (!(intel_pinctrl_should_save(pctrl, desc->number) ||
+		      /*
+		       * If the firmware mangled the register contents too much,
+		       * check the saved value for the Direct IRQ mode.
+		       */
+		      __intel_gpio_is_direct_irq(pads[i].padcfg0)))
 			continue;
 
 		intel_restore_padcfg(pctrl, desc->number, PADCFG0, pads[i].padcfg0);