net: bcmgenet: hide status block before TX timestamping

The hardware checksum offloading requires use of a transmit
status block inserted before the outgoing frame data, this was
updated in '9a9ba2a4aaaa ("net: bcmgenet: always enable status blocks")'

However, skb_tx_timestamp() assumes that it is passed a raw frame
and PTP parsing chokes on this status block.

Fix this by calling __skb_pull(), which hides the TSB before calling
skb_tx_timestamp(), so an outgoing PTP packet is parsed correctly.

As the data in the skb has already been set up for DMA, and the
dma_unmap_* calls use a separately stored address, there is no
no effective change in the data transmission.

Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20220424165307.591145-1-jonathan.lemon@gmail.com
Fixes: d03825f ("net: bcmgenet: add skb_tx_timestamp call")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Author: jlemon

drivers/net/ethernet/broadcom/genet/bcmgenet.c

@@ -2035,6 +2035,11 @@ static struct sk_buff *bcmgenet_add_tsb(struct net_device *dev,
 	return skb;
 }
 
+static void bcmgenet_hide_tsb(struct sk_buff *skb)
+{
+	__skb_pull(skb, sizeof(struct status_64));
+}
+
 static netdev_tx_t bcmgenet_xmit(struct sk_buff *skb, struct net_device *dev)
 {
 	struct bcmgenet_priv *priv = netdev_priv(dev);
@@ -2141,6 +2146,8 @@ static netdev_tx_t bcmgenet_xmit(struct sk_buff *skb, struct net_device *dev)
 	}
 
 	GENET_CB(skb)->last_cb = tx_cb_ptr;
+
+	bcmgenet_hide_tsb(skb);
 	skb_tx_timestamp(skb);
 
 	/* Decrement total BD count and advance our write pointer */