Merge tag 'pwm/for-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm

Pull pwm updates from Thierry Reding:
 "There's a little bit of everything in here: we've got various
  improvements and cleanups to drivers, some fixes across the board and
  a bit of new hardware support"

* tag 'pwm/for-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (22 commits)
  dt-bindings: pwm: convert pwm-bcm2835 bindings to YAML
  pwm: Add Renesas RZ/G2L MTU3a PWM driver
  pwm: mtk_disp: Fix the disable flow of disp_pwm
  dt-bindings: pwm: restrict node name suffixes
  pwm: pca9685: Switch i2c driver back to use .probe()
  pwm: ab8500: Fix error code in probe()
  MAINTAINERS: add pwm to PolarFire SoC entry
  pwm: add microchip soft ip corePWM driver
  pwm: sysfs: Do not apply state to already disabled PWMs
  pwm: imx-tpm: force 'real_period' to be zero in suspend
  pwm: meson: make full use of common clock framework
  pwm: meson: don't use hdmi/video clock as mux parent
  pwm: meson: switch to using struct clk_parent_data for mux parents
  pwm: meson: remove not needed check in meson_pwm_calc
  pwm: meson: fix handling of period/duty if greater than UINT_MAX
  pwm: meson: modify and simplify calculation in meson_pwm_get_state
  dt-bindings: pwm: Add R-Car V3U device tree bindings
  dt-bindings: pwm: imx: add i.MX8QXP compatible
  pwm: mediatek: Add support for MT7981
  dt-bindings: pwm: mediatek: Add mediatek,mt7981 compatible
  ...

Author: torvalds

Documentation/devicetree/bindings/pwm/imx-pwm.yaml

@@ -43,6 +43,7 @@ properties:
               - fsl,imx8mn-pwm
               - fsl,imx8mp-pwm
               - fsl,imx8mq-pwm
+              - fsl,imx8qxp-pwm
           - const: fsl,imx27-pwm
 
   reg:
@@ -61,6 +62,9 @@ properties:
   interrupts:
     maxItems: 1
 
+  power-domains:
+    maxItems: 1
+
 required:
   - compatible
   - reg

Documentation/devicetree/bindings/pwm/mediatek,mt2712-pwm.yaml

@@ -22,6 +22,7 @@ properties:
           - mediatek,mt7623-pwm
           - mediatek,mt7628-pwm
           - mediatek,mt7629-pwm
+          - mediatek,mt7981-pwm
           - mediatek,mt7986-pwm
           - mediatek,mt8183-pwm
           - mediatek,mt8365-pwm

Documentation/devicetree/bindings/pwm/pwm-bcm2835.txt

@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pwm/pwm-bcm2835.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: BCM2835 PWM controller (Raspberry Pi controller)
+
+maintainers:
+  - Stefan Wahren <stefan.wahren@i2se.com>
+
+allOf:
+  - $ref: pwm.yaml#
+
+properties:
+  compatible:
+    const: brcm,bcm2835-pwm
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  "#pwm-cells":
+    const: 3
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - "#pwm-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    pwm@2020c000 {
+      compatible = "brcm,bcm2835-pwm";
+      reg = <0x2020c000 0x28>;
+      clocks = <&clk_pwm>;
+      #pwm-cells = <3>;
+    };

Documentation/devicetree/bindings/pwm/pwm-bcm2835.yaml

@@ -13,7 +13,7 @@ select: false
 
 properties:
   $nodename:
-    pattern: "^pwm(@.*|-[0-9a-f])*$"
+    pattern: "^pwm(@.*|-([0-9]|[1-9][0-9]+))?$"
 
   "#pwm-cells":
     description:

Documentation/devicetree/bindings/pwm/pwm.yaml

@@ -35,6 +35,7 @@ properties:
           - renesas,pwm-r8a77980  # R-Car V3H
           - renesas,pwm-r8a77990  # R-Car E3
           - renesas,pwm-r8a77995  # R-Car D3
+          - renesas,pwm-r8a779a0  # R-Car V3U
           - renesas,pwm-r8a779g0  # R-Car V4H
       - const: renesas,pwm-rcar
 

Documentation/devicetree/bindings/pwm/renesas,pwm-rcar.yaml

@@ -18337,6 +18337,7 @@ F:	drivers/clk/microchip/clk-mpfs*.c
 F:	drivers/i2c/busses/i2c-microchip-corei2c.c
 F:	drivers/mailbox/mailbox-mpfs.c
 F:	drivers/pci/controller/pcie-microchip-host.c
+F:	drivers/pwm/pwm-microchip-core.c
 F:	drivers/reset/reset-mpfs.c
 F:	drivers/rtc/rtc-mpfs.c
 F:	drivers/soc/microchip/mpfs-sys-controller.c

MAINTAINERS

@@ -405,6 +405,16 @@ config PWM_MEDIATEK
 	  To compile this driver as a module, choose M here: the module
 	  will be called pwm-mediatek.
 
+config PWM_MICROCHIP_CORE
+	tristate "Microchip corePWM PWM support"
+	depends on SOC_MICROCHIP_POLARFIRE || COMPILE_TEST
+	depends on HAS_IOMEM && OF
+	help
+	  PWM driver for Microchip FPGA soft IP core.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called pwm-microchip-core.
+
 config PWM_MXS
 	tristate "Freescale MXS PWM support"
 	depends on ARCH_MXS || COMPILE_TEST
@@ -493,6 +503,17 @@ config PWM_ROCKCHIP
 	  Generic PWM framework driver for the PWM controller found on
 	  Rockchip SoCs.
 
+config PWM_RZ_MTU3
+	tristate "Renesas RZ/G2L MTU3a PWM Timer support"
+	depends on RZ_MTU3 || COMPILE_TEST
+	depends on HAS_IOMEM
+	help
+	  This driver exposes the MTU3a PWM Timer controller found in Renesas
+	  RZ/G2L like chips through the PWM API.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called pwm-rz-mtu3.
+
 config PWM_SAMSUNG
 	tristate "Samsung PWM support"
 	depends on PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST

drivers/pwm/Kconfig

@@ -35,6 +35,7 @@ obj-$(CONFIG_PWM_LPSS_PCI)	+= pwm-lpss-pci.o
 obj-$(CONFIG_PWM_LPSS_PLATFORM)	+= pwm-lpss-platform.o
 obj-$(CONFIG_PWM_MESON)		+= pwm-meson.o
 obj-$(CONFIG_PWM_MEDIATEK)	+= pwm-mediatek.o
+obj-$(CONFIG_PWM_MICROCHIP_CORE)	+= pwm-microchip-core.o
 obj-$(CONFIG_PWM_MTK_DISP)	+= pwm-mtk-disp.o
 obj-$(CONFIG_PWM_MXS)		+= pwm-mxs.o
 obj-$(CONFIG_PWM_NTXEC)		+= pwm-ntxec.o
@@ -45,6 +46,7 @@ obj-$(CONFIG_PWM_RASPBERRYPI_POE)	+= pwm-raspberrypi-poe.o
 obj-$(CONFIG_PWM_RCAR)		+= pwm-rcar.o
 obj-$(CONFIG_PWM_RENESAS_TPU)	+= pwm-renesas-tpu.o
 obj-$(CONFIG_PWM_ROCKCHIP)	+= pwm-rockchip.o
+obj-$(CONFIG_PWM_RZ_MTU3)	+= pwm-rz-mtu3.o
 obj-$(CONFIG_PWM_SAMSUNG)	+= pwm-samsung.o
 obj-$(CONFIG_PWM_SIFIVE)	+= pwm-sifive.o
 obj-$(CONFIG_PWM_SL28CPLD)	+= pwm-sl28cpld.o

drivers/pwm/Makefile

@@ -190,7 +190,7 @@ static int ab8500_pwm_probe(struct platform_device *pdev)
 	int err;
 
 	if (pdev->id < 1 || pdev->id > 31)
-		return dev_err_probe(&pdev->dev, EINVAL, "Invalid device id %d\n", pdev->id);
+		return dev_err_probe(&pdev->dev, -EINVAL, "Invalid device id %d\n", pdev->id);
 
 	/*
 	 * Nothing to be done in probe, this is required to get the