spi: spi-mem: Introduce a default ->exec_op() debug log

Many spi-mem controller drivers have a very similar debug log at the
beginning of their ->exec_op() callback implementation. This debug log is
effectively useful, so let's create one that is complete and concise
enough, so developers no longer need to write their own. The verbosity
being high, VERBOSE_DEBUG will be required in this case.

Remove the debug log from individual drivers and propose a common one.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Link: https://patch.msgid.link/20250320115644.2231240-1-miquel.raynal@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>

Author: miquelraynal

drivers/spi/spi-aspeed-smc.c

@@ -303,13 +303,6 @@ static int do_aspeed_spi_exec_op(struct spi_mem *mem, const struct spi_mem_op *o
 	u32 ctl_val;
 	int ret = 0;
 
-	dev_dbg(aspi->dev,
-		"CE%d %s OP %#x mode:%d.%d.%d.%d naddr:%#x ndummies:%#x len:%#x",
-		chip->cs, op->data.dir == SPI_MEM_DATA_IN ? "read" : "write",
-		op->cmd.opcode, op->cmd.buswidth, op->addr.buswidth,
-		op->dummy.buswidth, op->data.buswidth,
-		op->addr.nbytes, op->dummy.nbytes, op->data.nbytes);
-
 	addr_mode = readl(aspi->regs + CE_CTRL_REG);
 	addr_mode_backup = addr_mode;
 

drivers/spi/spi-mem.c

@@ -377,6 +377,17 @@ int spi_mem_exec_op(struct spi_mem *mem, const struct spi_mem_op *op)
 	/* Make sure the operation frequency is correct before going futher */
 	spi_mem_adjust_op_freq(mem, (struct spi_mem_op *)op);
 
+	dev_vdbg(&mem->spi->dev, "[cmd: 0x%02x][%dB addr: %#8llx][%2dB dummy][%4dB data %s] %d%c-%d%c-%d%c-%d%c @ %uHz\n",
+		 op->cmd.opcode,
+		 op->addr.nbytes, (op->addr.nbytes ? op->addr.val : 0),
+		 op->dummy.nbytes,
+		 op->data.nbytes, (op->data.nbytes ? (op->data.dir == SPI_MEM_DATA_IN ? " read" : "write") : "     "),
+		 op->cmd.buswidth, op->cmd.dtr ? 'D' : 'S',
+		 op->addr.buswidth, op->addr.dtr ? 'D' : 'S',
+		 op->dummy.buswidth, op->dummy.dtr ? 'D' : 'S',
+		 op->data.buswidth, op->data.dtr ? 'D' : 'S',
+		 op->max_freq ? op->max_freq : mem->spi->max_speed_hz);
+
 	ret = spi_mem_check_op(op);
 	if (ret)
 		return ret;

drivers/spi/spi-mtk-snfi.c

@@ -1284,9 +1284,6 @@ static int mtk_snand_exec_op(struct spi_mem *mem, const struct spi_mem_op *op)
 {
 	struct mtk_snand *ms = spi_controller_get_devdata(mem->spi->controller);
 
-	dev_dbg(ms->dev, "OP %02x ADDR %08llX@%d:%u DATA %d:%u", op->cmd.opcode,
-		op->addr.val, op->addr.buswidth, op->addr.nbytes,
-		op->data.buswidth, op->data.nbytes);
 	if (mtk_snand_is_page_ops(op)) {
 		if (op->data.dir == SPI_MEM_DATA_IN)
 			return mtk_snand_read_page_cache(ms, op);

drivers/spi/spi-npcm-fiu.c

@@ -550,11 +550,6 @@ static int npcm_fiu_exec_op(struct spi_mem *mem, const struct spi_mem_op *op)
 	int ret = 0;
 	u8 *buf;
 
-	dev_dbg(fiu->dev, "cmd:%#x mode:%d.%d.%d.%d addr:%#llx len:%#x\n",
-		op->cmd.opcode, op->cmd.buswidth, op->addr.buswidth,
-		op->dummy.buswidth, op->data.buswidth, op->addr.val,
-		op->data.nbytes);
-
 	if (fiu->spix_mode || op->addr.nbytes > 4)
 		return -EOPNOTSUPP;
 

drivers/spi/spi-stm32-qspi.c

@@ -362,11 +362,6 @@ static int stm32_qspi_send(struct spi_device *spi, const struct spi_mem_op *op)
 	u32 ccr, cr;
 	int timeout, err = 0, err_poll_status = 0;
 
-	dev_dbg(qspi->dev, "cmd:%#x mode:%d.%d.%d.%d addr:%#llx len:%#x\n",
-		op->cmd.opcode, op->cmd.buswidth, op->addr.buswidth,
-		op->dummy.buswidth, op->data.buswidth,
-		op->addr.val, op->data.nbytes);
-
 	cr = readl_relaxed(qspi->io_base + QSPI_CR);
 	cr &= ~CR_PRESC_MASK & ~CR_FSEL;
 	cr |= FIELD_PREP(CR_PRESC_MASK, flash->presc);

drivers/spi/spi-zynq-qspi.c

@@ -540,10 +540,6 @@ static int zynq_qspi_exec_mem_op(struct spi_mem *mem,
 	int err = 0, i;
 	u8 *tmpbuf;
 
-	dev_dbg(xqspi->dev, "cmd:%#x mode:%d.%d.%d.%d\n",
-		op->cmd.opcode, op->cmd.buswidth, op->addr.buswidth,
-		op->dummy.buswidth, op->data.buswidth);
-
 	zynq_qspi_chipselect(mem->spi, true);
 	zynq_qspi_config_op(xqspi, mem->spi, op);
 

drivers/spi/spi-zynqmp-gqspi.c

@@ -1052,10 +1052,6 @@ static int zynqmp_qspi_exec_op(struct spi_mem *mem,
 	u16 opcode = op->cmd.opcode;
 	u64 opaddr;
 
-	dev_dbg(xqspi->dev, "cmd:%#x mode:%d.%d.%d.%d\n",
-		op->cmd.opcode, op->cmd.buswidth, op->addr.buswidth,
-		op->dummy.buswidth, op->data.buswidth);
-
 	mutex_lock(&xqspi->op_lock);
 	zynqmp_qspi_config_op(xqspi, op);
 	zynqmp_qspi_chipselect(mem->spi, false);