dt-bindings: mtd: marvell-nand: Convert to YAML DT scheme

Switch the DT binding to a YAML schema to enable the DT validation.

There was also an incorrect reference to dma-names being "rxtx" where
the driver and existing device trees actually use dma-names = "data" so
this is corrected in the conversion.

Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu>
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20230619040742.1108172-2-chris.packham@alliedtelesis.co.nz

Author: vkochan-plv

Documentation/devicetree/bindings/mtd/marvell,nand-controller.yaml

@@ -0,0 +1,226 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/marvell,nand-controller.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell NAND Flash Controller (NFC)
+
+maintainers:
+  - Miquel Raynal <miquel.raynal@bootlin.com>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: marvell,armada-8k-nand-controller
+          - const: marvell,armada370-nand-controller
+      - enum:
+          - marvell,armada370-nand-controller
+          - marvell,pxa3xx-nand-controller
+      - description: legacy bindings
+        deprecated: true
+        enum:
+          - marvell,armada-8k-nand
+          - marvell,armada370-nand
+          - marvell,pxa3xx-nand
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    description:
+      Shall reference the NAND controller clocks, the second one is
+      is only needed for the Armada 7K/8K SoCs
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: core
+      - const: reg
+
+  dmas:
+    maxItems: 1
+
+  dma-names:
+    items:
+      - const: data
+
+  marvell,system-controller:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: Syscon node that handles NAND controller related registers
+
+patternProperties:
+  "^nand@[a-f0-9]$":
+    type: object
+    $ref: raw-nand-chip.yaml
+
+    properties:
+      reg:
+        minimum: 0
+        maximum: 3
+
+      nand-rb:
+        items:
+          - minimum: 0
+            maximum: 1
+
+      nand-ecc-step-size:
+        const: 512
+
+      nand-ecc-strength:
+        enum: [1, 4, 8, 12, 16]
+
+      nand-ecc-mode:
+        const: hw
+
+      marvell,nand-keep-config:
+        $ref: /schemas/types.yaml#/definitions/flag
+        description:
+          Orders the driver not to take the timings from the core and
+          leaving them completely untouched. Bootloader timings will then
+          be used.
+
+      marvell,nand-enable-arbiter:
+        $ref: /schemas/types.yaml#/definitions/flag
+        description:
+          To enable the arbiter, all boards blindly used it,
+          this bit was set by the bootloader for many boards and even if
+          it is marked reserved in several datasheets, it might be needed to set
+          it (otherwise it is harmless).
+        deprecated: true
+
+    required:
+      - reg
+      - nand-rb
+
+    unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+allOf:
+  - $ref: nand-controller.yaml#
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: marvell,pxa3xx-nand-controller
+    then:
+      required:
+        - dmas
+        - dma-names
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: marvell,armada-8k-nand-controller
+    then:
+      properties:
+        clocks:
+          minItems: 2
+
+        clock-names:
+          minItems: 2
+
+      required:
+        - marvell,system-controller
+
+    else:
+      properties:
+        clocks:
+          minItems: 1
+
+        clock-names:
+          minItems: 1
+
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    nand_controller: nand-controller@d0000 {
+        compatible = "marvell,armada370-nand-controller";
+        reg = <0xd0000 0x54>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+        interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&coredivclk 0>;
+
+        nand@0 {
+            reg = <0>;
+            label = "main-storage";
+            nand-rb = <0>;
+            nand-ecc-mode = "hw";
+            marvell,nand-keep-config;
+            nand-on-flash-bbt;
+            nand-ecc-strength = <4>;
+            nand-ecc-step-size = <512>;
+
+            partitions {
+                compatible = "fixed-partitions";
+                #address-cells = <1>;
+                #size-cells = <1>;
+
+                partition@0 {
+                    label = "Rootfs";
+                    reg = <0x00000000 0x40000000>;
+                };
+            };
+        };
+    };
+
+  - |
+    cp0_nand_controller: nand-controller@720000 {
+        compatible = "marvell,armada-8k-nand-controller",
+                "marvell,armada370-nand-controller";
+        reg = <0x720000 0x54>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+        interrupts = <115 IRQ_TYPE_LEVEL_HIGH>;
+        clock-names = "core", "reg";
+        clocks = <&cp0_clk 1 2>,
+                 <&cp0_clk 1 17>;
+        marvell,system-controller = <&cp0_syscon0>;
+
+        nand@0 {
+            reg = <0>;
+            label = "main-storage";
+            nand-rb = <0>;
+            nand-ecc-mode = "hw";
+            nand-ecc-strength = <8>;
+            nand-ecc-step-size = <512>;
+        };
+    };
+
+  - |
+    nand-controller@43100000 {
+        compatible = "marvell,pxa3xx-nand-controller";
+        reg = <0x43100000 90>;
+        interrupts = <45>;
+        clocks = <&clks 1>;
+        clock-names = "core";
+        dmas = <&pdma 97 3>;
+        dma-names = "data";
+        #address-cells = <1>;
+        #size-cells = <0>;
+        nand@0 {
+            reg = <0>;
+            nand-rb = <0>;
+            nand-ecc-mode = "hw";
+            marvell,nand-keep-config;
+        };
+    };
+
+...

Documentation/devicetree/bindings/mtd/marvell-nand.txt

@@ -12525,7 +12525,6 @@ MARVELL NAND CONTROLLER DRIVER
 M:	Miquel Raynal <miquel.raynal@bootlin.com>
 L:	linux-mtd@lists.infradead.org
 S:	Maintained
-F:	Documentation/devicetree/bindings/mtd/marvell-nand.txt
 F:	drivers/mtd/nand/raw/marvell_nand.c
 
 MARVELL OCTEONTX2 PHYSICAL FUNCTION DRIVER