dt-bindings: cleanup DTS example whitespaces

The DTS code coding style expects spaces around '=' sign.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> #display/msm
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Mike Leach <mike.leach@linaro.org>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Acked-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20230702182308.7583-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring <robh@kernel.org>

Author: krzk

Documentation/devicetree/bindings/arm/arm,coresight-cti.yaml

@@ -287,7 +287,7 @@ examples:
             arm,trig-in-sigs = <0 1>;
             arm,trig-in-types = <PE_DBGTRIGGER
                                  PE_PMUIRQ>;
-            arm,trig-out-sigs=<0 1 2 >;
+            arm,trig-out-sigs = <0 1 2 >;
             arm,trig-out-types = <PE_EDBGREQ
                                   PE_DBGRESTART
                                   PE_CTIIRQ>;
@@ -309,24 +309,24 @@ examples:
 
       trig-conns@0 {
         reg = <0>;
-        arm,trig-in-sigs=<0>;
-        arm,trig-in-types=<GEN_INTREQ>;
-        arm,trig-out-sigs=<0>;
-        arm,trig-out-types=<GEN_HALTREQ>;
+        arm,trig-in-sigs = <0>;
+        arm,trig-in-types = <GEN_INTREQ>;
+        arm,trig-out-sigs = <0>;
+        arm,trig-out-types = <GEN_HALTREQ>;
         arm,trig-conn-name = "sys_profiler";
       };
 
       trig-conns@1 {
         reg = <1>;
-        arm,trig-out-sigs=<2 3>;
-        arm,trig-out-types=<GEN_HALTREQ GEN_RESTARTREQ>;
+        arm,trig-out-sigs = <2 3>;
+        arm,trig-out-types = <GEN_HALTREQ GEN_RESTARTREQ>;
         arm,trig-conn-name = "watchdog";
       };
 
       trig-conns@2 {
         reg = <2>;
-        arm,trig-in-sigs=<1 6>;
-        arm,trig-in-types=<GEN_HALTREQ GEN_RESTARTREQ>;
+        arm,trig-in-sigs = <1 6>;
+        arm,trig-in-types = <GEN_HALTREQ GEN_RESTARTREQ>;
         arm,trig-conn-name = "g_counter";
       };
     };

Documentation/devicetree/bindings/arm/keystone/ti,sci.yaml

@@ -96,8 +96,8 @@ examples:
       compatible = "ti,k2g-sci";
       ti,system-reboot-controller;
       mbox-names = "rx", "tx";
-      mboxes= <&msgmgr 5 2>,
-              <&msgmgr 0 0>;
+      mboxes = <&msgmgr 5 2>,
+               <&msgmgr 0 0>;
       reg-names = "debug_messages";
       reg = <0x02921800 0x800>;
     };
@@ -107,8 +107,8 @@ examples:
       compatible = "ti,k2g-sci";
       ti,host-id = <12>;
       mbox-names = "rx", "tx";
-      mboxes= <&secure_proxy_main 11>,
-              <&secure_proxy_main 13>;
+      mboxes = <&secure_proxy_main 11>,
+               <&secure_proxy_main 13>;
       reg-names = "debug_messages";
       reg = <0x44083000 0x1000>;
 

Documentation/devicetree/bindings/display/msm/gmu.yaml

@@ -225,7 +225,7 @@ examples:
     #include <dt-bindings/interrupt-controller/arm-gic.h>
 
     gmu: gmu@506a000 {
-        compatible="qcom,adreno-gmu-630.2", "qcom,adreno-gmu";
+        compatible = "qcom,adreno-gmu-630.2", "qcom,adreno-gmu";
 
         reg = <0x506a000 0x30000>,
               <0xb280000 0x10000>,

Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.yaml

@@ -74,7 +74,7 @@ examples:
             vdd3-supply = <&vcclcd_reg>;
             vci-supply = <&vlcd_reg>;
             reset-gpios = <&gpy4 5 0>;
-            power-on-delay= <50>;
+            power-on-delay = <50>;
             reset-delay = <100>;
             init-delay = <100>;
             panel-width-mm = <58>;

Documentation/devicetree/bindings/display/rockchip/rockchip-vop.yaml

@@ -121,11 +121,11 @@ examples:
         #size-cells = <0>;
         vopb_out_edp: endpoint@0 {
           reg = <0>;
-          remote-endpoint=<&edp_in_vopb>;
+          remote-endpoint = <&edp_in_vopb>;
         };
         vopb_out_hdmi: endpoint@1 {
           reg = <1>;
-          remote-endpoint=<&hdmi_in_vopb>;
+          remote-endpoint = <&hdmi_in_vopb>;
         };
       };
     };

Documentation/devicetree/bindings/iio/adc/ti,adc108s102.yaml

@@ -35,7 +35,7 @@ unevaluatedProperties: false
 examples:
   - |
     spi {
-        #address-cells= <1>;
+        #address-cells = <1>;
         #size-cells = <0>;
 
         adc@0 {

Documentation/devicetree/bindings/media/renesas,rzg2l-cru.yaml

@@ -137,7 +137,7 @@ examples:
 
                 cru_parallel_in: endpoint@0 {
                     reg = <0>;
-                    remote-endpoint= <&ov5642>;
+                    remote-endpoint = <&ov5642>;
                     hsync-active = <1>;
                     vsync-active = <1>;
                 };
@@ -150,7 +150,7 @@ examples:
 
                 cru_csi_in: endpoint@0 {
                     reg = <0>;
-                    remote-endpoint= <&csi_cru_in>;
+                    remote-endpoint = <&csi_cru_in>;
                 };
             };
         };

Documentation/devicetree/bindings/media/renesas,vin.yaml

@@ -303,11 +303,11 @@ examples:
 
                             vin0csi20: endpoint@0 {
                                     reg = <0>;
-                                    remote-endpoint= <&csi20vin0>;
+                                    remote-endpoint = <&csi20vin0>;
                             };
                             vin0csi40: endpoint@2 {
                                     reg = <2>;
-                                    remote-endpoint= <&csi40vin0>;
+                                    remote-endpoint = <&csi40vin0>;
                             };
                     };
             };

Documentation/devicetree/bindings/mtd/mtd-physmap.yaml

@@ -164,7 +164,7 @@ examples:
             reg = <0 0xf80000>;
         };
         firmware@f80000 {
-            label ="firmware";
+            label = "firmware";
             reg = <0xf80000 0x80000>;
             read-only;
         };

Documentation/devicetree/bindings/net/mediatek-dwmac.yaml

@@ -156,7 +156,7 @@ examples:
         reg = <0x1101c000 0x1300>;
         interrupts = <GIC_SPI 237 IRQ_TYPE_LEVEL_LOW>;
         interrupt-names = "macirq";
-        phy-mode ="rgmii-rxid";
+        phy-mode = "rgmii-rxid";
         mac-address = [00 55 7b b5 7d f7];
         clock-names = "axi",
                       "apb",