powerpc: rename SPRN_HID2 define to SPRN_HID2_750FX

This register number is hardware-specific, rename it for clarity.

FIXME comments are added in a few places where it seems like the wrong
register is used. As I can't test this, only the rename is done with no
functional change.

Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240124105031.45734-1-matthias.schiffer@ew.tq-group.com

Author: tq-schiffern

arch/powerpc/include/asm/reg.h

@@ -615,7 +615,7 @@
 #define HID1_ABE	(1<<10)		/* 7450 Address Broadcast Enable */
 #define HID1_PS		(1<<16)		/* 750FX PLL selection */
 #endif
-#define SPRN_HID2	0x3F8		/* Hardware Implementation Register 2 */
+#define SPRN_HID2_750FX	0x3F8		/* IBM 750FX HID2 Register */
 #define SPRN_HID2_GEKKO	0x398		/* Gekko HID2 Register */
 #define SPRN_HID2_G2_LE	0x3F3		/* G2_LE HID2 Register */
 #define  HID2_G2_LE_HBE	(1<<18)		/* High BAT Enable (G2_LE) */

arch/powerpc/kernel/cpu_setup_6xx.S

@@ -401,7 +401,7 @@ _GLOBAL(__save_cpu_setup)
 	andi.	r3,r3,0xff00
 	cmpwi	cr0,r3,0x0200
 	bne	1f
-	mfspr	r4,SPRN_HID2
+	mfspr	r4,SPRN_HID2_750FX
 	stw	r4,CS_HID2(r5)
 1:
 	mtcr	r7
@@ -496,7 +496,7 @@ _GLOBAL(__restore_cpu_setup)
 	bne	4f
 	lwz	r4,CS_HID2(r5)
 	rlwinm	r4,r4,0,19,17
-	mtspr	SPRN_HID2,r4
+	mtspr	SPRN_HID2_750FX,r4
 	sync
 4:
 	lwz	r4,CS_HID1(r5)

arch/powerpc/kvm/book3s_emulate.c

@@ -714,7 +714,7 @@ int kvmppc_core_emulate_mtspr_pr(struct kvm_vcpu *vcpu, int sprn, ulong spr_val)
 	case SPRN_HID1:
 		to_book3s(vcpu)->hid[1] = spr_val;
 		break;
-	case SPRN_HID2:
+	case SPRN_HID2_750FX:
 		to_book3s(vcpu)->hid[2] = spr_val;
 		break;
 	case SPRN_HID2_GEKKO:
@@ -900,7 +900,7 @@ int kvmppc_core_emulate_mfspr_pr(struct kvm_vcpu *vcpu, int sprn, ulong *spr_val
 	case SPRN_HID1:
 		*spr_val = to_book3s(vcpu)->hid[1];
 		break;
-	case SPRN_HID2:
+	case SPRN_HID2_750FX:
 	case SPRN_HID2_GEKKO:
 		*spr_val = to_book3s(vcpu)->hid[2];
 		break;

arch/powerpc/platforms/52xx/lite5200_sleep.S

@@ -203,7 +203,8 @@ lite5200_wakeup:
 
 	/* HIDs, MSR */
 	LOAD_SPRN(HID1, 0x19)
-	LOAD_SPRN(HID2, 0x1a)
+	/* FIXME: Should this use HID2_G2_LE? */
+	LOAD_SPRN(HID2_750FX, 0x1a)
 
 
 	/* address translation is tricky (see turn_on_mmu) */
@@ -283,7 +284,8 @@ SYM_FUNC_START_LOCAL(save_regs)
 
 	SAVE_SPRN(HID0, 0x18)
 	SAVE_SPRN(HID1, 0x19)
-	SAVE_SPRN(HID2, 0x1a)
+	/* FIXME: Should this use HID2_G2_LE? */
+	SAVE_SPRN(HID2_750FX, 0x1a)
 	mfmsr	r10
 	stw	r10, (4*0x1b)(r4)
 	/*SAVE_SPRN(LR, 0x1c) have to save it before the call */

arch/powerpc/platforms/83xx/suspend-asm.S

@@ -68,7 +68,8 @@ _GLOBAL(mpc83xx_enter_deep_sleep)
 
 	mfspr	r5, SPRN_HID0
 	mfspr	r6, SPRN_HID1
-	mfspr	r7, SPRN_HID2
+	/* FIXME: Should this use SPRN_HID2_G2_LE? */
+	mfspr	r7, SPRN_HID2_750FX
 
 	stw	r5, SS_HID+0(r3)
 	stw	r6, SS_HID+4(r3)
@@ -396,7 +397,8 @@ mpc83xx_deep_resume:
 
 	mtspr	SPRN_HID0, r5
 	mtspr	SPRN_HID1, r6
-	mtspr	SPRN_HID2, r7
+	/* FIXME: Should this use SPRN_HID2_G2_LE? */
+	mtspr	SPRN_HID2_750FX, r7
 
 	lwz	r4, SS_IABR+0(r3)
 	lwz	r5, SS_IABR+4(r3)

drivers/cpufreq/pmac32-cpufreq.c

@@ -120,9 +120,9 @@ static int cpu_750fx_cpu_speed(int low_speed)
 
 		/* tweak L2 for high voltage */
 		if (has_cpu_l2lve) {
-			hid2 = mfspr(SPRN_HID2);
+			hid2 = mfspr(SPRN_HID2_750FX);
 			hid2 &= ~0x2000;
-			mtspr(SPRN_HID2, hid2);
+			mtspr(SPRN_HID2_750FX, hid2);
 		}
 	}
 #ifdef CONFIG_PPC_BOOK3S_32
@@ -131,9 +131,9 @@ static int cpu_750fx_cpu_speed(int low_speed)
 	if (low_speed == 1) {
 		/* tweak L2 for low voltage */
 		if (has_cpu_l2lve) {
-			hid2 = mfspr(SPRN_HID2);
+			hid2 = mfspr(SPRN_HID2_750FX);
 			hid2 |= 0x2000;
-			mtspr(SPRN_HID2, hid2);
+			mtspr(SPRN_HID2_750FX, hid2);
 		}
 
 		/* ramping down, set voltage last */