powerpc/hv-gpci: Fix the H_GET_PERF_COUNTER_INFO hcall return value checks

Running event hv_gpci/dispatch_timebase_by_processor_processor_time_in_timebase_cycles,phys_processor_idx=0/
in one of the system throws below error:

 ---Logs---
 # perf list | grep hv_gpci/dispatch_timebase_by_processor_processor_time_in_timebase_cycles
  hv_gpci/dispatch_timebase_by_processor_processor_time_in_timebase_cycles,phys_processor_idx=?/[Kernel PMU event]

 # perf stat -v -e hv_gpci/dispatch_timebase_by_processor_processor_time_in_timebase_cycles,phys_processor_idx=0/ sleep 2
Using CPUID 00800200
Control descriptor is not initialized
Warning:
hv_gpci/dispatch_timebase_by_processor_processor_time_in_timebase_cycles,phys_processor_idx=0/ event is not supported by the kernel.
failed to read counter hv_gpci/dispatch_timebase_by_processor_processor_time_in_timebase_cycles,phys_processor_idx=0/

 Performance counter stats for 'system wide':

   <not supported>      hv_gpci/dispatch_timebase_by_processor_processor_time_in_timebase_cycles,phys_processor_idx=0/

       2.000700771 seconds time elapsed

The above error is because of the hcall failure as required
permission "Enable Performance Information Collection" is not set.
Based on current code, single_gpci_request function did not check the
error type incase hcall fails and by default returns EINVAL. But we can
have other reasons for hcall failures like H_AUTHORITY/H_PARAMETER with
detail_rc as GEN_BUF_TOO_SMALL, for which we need to act accordingly.

Fix this issue by adding new checks in the single_gpci_request and
h_gpci_event_init functions.

Result after fix patch changes:

 # perf stat -e hv_gpci/dispatch_timebase_by_processor_processor_time_in_timebase_cycles,phys_processor_idx=0/ sleep 2
Error:
No permission to enable hv_gpci/dispatch_timebase_by_processor_processor_time_in_timebase_cycles,phys_processor_idx=0/ event.

Fixes: 220a0c6 ("powerpc/perf: Add support for the hv gpci (get performance counter info) interface")
Reported-by: Akanksha J N <akanksha@linux.ibm.com>
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240229122847.101162-1-kjain@linux.ibm.com

Author: kjain101

arch/powerpc/perf/hv-gpci.c

@@ -695,6 +695,20 @@ static unsigned long single_gpci_request(u32 req, u32 starting_index,
 
 	ret = plpar_hcall_norets(H_GET_PERF_COUNTER_INFO,
 			virt_to_phys(arg), HGPCI_REQ_BUFFER_SIZE);
+
+	/*
+	 * ret value as 'H_PARAMETER' with detail_rc as 'GEN_BUF_TOO_SMALL',
+	 * specifies that the current buffer size cannot accommodate
+	 * all the information and a partial buffer returned.
+	 * Since in this function we are only accessing data for a given starting index,
+	 * we don't need to accommodate whole data and can get required count by
+	 * accessing first entry data.
+	 * Hence hcall fails only incase the ret value is other than H_SUCCESS or
+	 * H_PARAMETER with detail_rc value as GEN_BUF_TOO_SMALL(0x1B).
+	 */
+	if (ret == H_PARAMETER && be32_to_cpu(arg->params.detail_rc) == 0x1B)
+		ret = 0;
+
 	if (ret) {
 		pr_devel("hcall failed: 0x%lx\n", ret);
 		goto out;
@@ -759,6 +773,7 @@ static int h_gpci_event_init(struct perf_event *event)
 {
 	u64 count;
 	u8 length;
+	unsigned long ret;
 
 	/* Not our event */
 	if (event->attr.type != event->pmu->type)
@@ -789,13 +804,23 @@ static int h_gpci_event_init(struct perf_event *event)
 	}
 
 	/* check if the request works... */
-	if (single_gpci_request(event_get_request(event),
+	ret = single_gpci_request(event_get_request(event),
 				event_get_starting_index(event),
 				event_get_secondary_index(event),
 				event_get_counter_info_version(event),
 				event_get_offset(event),
 				length,
-				&count)) {
+				&count);
+
+	/*
+	 * ret value as H_AUTHORITY implies that partition is not permitted to retrieve
+	 * performance information, and required to set
+	 * "Enable Performance Information Collection" option.
+	 */
+	if (ret == H_AUTHORITY)
+		return -EPERM;
+
+	if (ret) {
 		pr_devel("gpci hcall failed\n");
 		return -EINVAL;
 	}