USB: dwc3: qcom: simplify wakeup interrupt setup

Use the IRQF_NO_AUTOEN irq flag when requesting the wakeup interrupts
instead of setting it separately.

No functional change intended.

Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Link: https://lore.kernel.org/r/20231120161607.7405-4-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Author: jhovold

drivers/usb/dwc3/dwc3-qcom.c

@@ -546,10 +546,9 @@ static int dwc3_qcom_setup_irq(struct platform_device *pdev)
 				pdata ? pdata->hs_phy_irq_index : -1);
 	if (irq > 0) {
 		/* Keep wakeup interrupts disabled until suspend */
-		irq_set_status_flags(irq, IRQ_NOAUTOEN);
 		ret = devm_request_threaded_irq(qcom->dev, irq, NULL,
 					qcom_dwc3_resume_irq,
-					IRQF_ONESHOT,
+					IRQF_ONESHOT | IRQF_NO_AUTOEN,
 					"qcom_dwc3 HS", qcom);
 		if (ret) {
 			dev_err(qcom->dev, "hs_phy_irq failed: %d\n", ret);
@@ -561,10 +560,9 @@ static int dwc3_qcom_setup_irq(struct platform_device *pdev)
 	irq = dwc3_qcom_get_irq(pdev, "dp_hs_phy_irq",
 				pdata ? pdata->dp_hs_phy_irq_index : -1);
 	if (irq > 0) {
-		irq_set_status_flags(irq, IRQ_NOAUTOEN);
 		ret = devm_request_threaded_irq(qcom->dev, irq, NULL,
 					qcom_dwc3_resume_irq,
-					IRQF_ONESHOT,
+					IRQF_ONESHOT | IRQF_NO_AUTOEN,
 					"qcom_dwc3 DP_HS", qcom);
 		if (ret) {
 			dev_err(qcom->dev, "dp_hs_phy_irq failed: %d\n", ret);
@@ -576,10 +574,9 @@ static int dwc3_qcom_setup_irq(struct platform_device *pdev)
 	irq = dwc3_qcom_get_irq(pdev, "dm_hs_phy_irq",
 				pdata ? pdata->dm_hs_phy_irq_index : -1);
 	if (irq > 0) {
-		irq_set_status_flags(irq, IRQ_NOAUTOEN);
 		ret = devm_request_threaded_irq(qcom->dev, irq, NULL,
 					qcom_dwc3_resume_irq,
-					IRQF_ONESHOT,
+					IRQF_ONESHOT | IRQF_NO_AUTOEN,
 					"qcom_dwc3 DM_HS", qcom);
 		if (ret) {
 			dev_err(qcom->dev, "dm_hs_phy_irq failed: %d\n", ret);
@@ -591,10 +588,9 @@ static int dwc3_qcom_setup_irq(struct platform_device *pdev)
 	irq = dwc3_qcom_get_irq(pdev, "ss_phy_irq",
 				pdata ? pdata->ss_phy_irq_index : -1);
 	if (irq > 0) {
-		irq_set_status_flags(irq, IRQ_NOAUTOEN);
 		ret = devm_request_threaded_irq(qcom->dev, irq, NULL,
 					qcom_dwc3_resume_irq,
-					IRQF_ONESHOT,
+					IRQF_ONESHOT | IRQF_NO_AUTOEN,
 					"qcom_dwc3 SS", qcom);
 		if (ret) {
 			dev_err(qcom->dev, "ss_phy_irq failed: %d\n", ret);