Merge tag 'drm-next-2022-03-24' of git://anongit.freedesktop.org/drm/drm

Pull drm updates from Dave Airlie:
 "Lots of work all over, Intel improving DG2 support, amdkfd CRIU
  support, msm new hw support, and faster fbdev support.

  dma-buf:
   - rename dma-buf-map to iosys-map

  core:
   - move buddy allocator to core
   - add pci/platform init macros
   - improve EDID parser deep color handling
   - EDID timing type 7 support
   - add GPD Win Max quirk
   - add yes/no helpers to string_helpers
   - flatten syncobj chains
   - add nomodeset support to lots of drivers
   - improve fb-helper clipping support
   - add default property value interface

  fbdev:
   - improve fbdev ops speed

  ttm:
   - add a backpointer from ttm bo->ttm resource

  dp:
   - move displayport headers
   - add a dp helper module

  bridge:
   - anx7625 atomic support, HDCP support

  panel:
   - split out panel-lvds and lvds bindings
   - find panels in OF subnodes

  privacy:
   - add chromeos privacy screen support

  fb:
   - hot unplug fw fb on forced removal

  simpledrm:
   - request region instead of marking ioresource busy
   - add panel oreintation property

  udmabuf:
   - fix oops with 0 pages

  amdgpu:
   - power management code cleanup
   - Enable freesync video mode by default
   - RAS code cleanup
   - Improve VRAM access for debug using SDMA
   - SR-IOV rework special register access and fixes
   - profiling power state request ioctl
   - expose IP discovery via sysfs
   - Cyan skillfish updates
   - GC 10.3.7, SDMA 5.2.7, DCN 3.1.6 updates
   - expose benchmark tests via debugfs
   - add module param to disable XGMI for testing
   - GPU reset debugfs register dumping support

  amdkfd:
   - CRIU support
   - SDMA queue fixes

  radeon:
   - UVD suspend fix
   - iMac backlight fix

  i915:
   - minimal parallel submission for execlists
   - DG2-G12 subplatform added
   - DG2 programming workarounds
   - DG2 accelerated migration support
   - flat CCS and CCS engine support for XeHP
   - initial small BAR support
   - drop fake LMEM support
   - ADL-N PCH support
   - bigjoiner updates
   - introduce VMA resources and async unbinding
   - register definitions cleanups
   - multi-FBC refactoring
   - DG1 OPROM over SPI support
   - ADL-N platform enabling
   - opregion mailbox #5 support
   - DP MST ESI improvements
   - drm device based logging
   - async flip optimisation for DG2
   - CPU arch abstraction fixes
   - improve GuC ADS init to work on aarch64
   - tweak TTM LRU priority hint
   - GuC 69.0.3 support
   - remove short term execbuf pins

  nouveau:
   - higher DP/eDP bitrates
   - backlight fixes

  msm:
   - dpu + dp support for sc8180x
   - dp support for sm8350
   - dpu + dsi support for qcm2290
   - 10nm dsi phy tuning support
   - bridge support for dp encoder
   - gpu support for additional 7c3 SKUs

  ingenic:
   - HDMI support for JZ4780
   - aux channel EDID support

  ast:
   - AST2600 support
   - add wide screen support
   - create DP/DVI connectors

  omapdrm:
   - fix implicit dma_buf fencing

  vc4:
   - add CSC + full range support
   - better display firmware handoff

  panfrost:
   - add initial dual-core GPU support

  stm:
   - new revision support
   - fb handover support

  mediatek:
   - transfer display binding document to yaml format.
   - add mt8195 display device binding.
   - allow commands to be sent during video mode.
   - add wait_for_event for crtc disable by cmdq.

  tegra:
   - YUV format support

  rcar-du:
   - LVDS support for M3-W+ (R8A77961)

  exynos:
   - BGR pixel format for FIMD device"

* tag 'drm-next-2022-03-24' of git://anongit.freedesktop.org/drm/drm: (1529 commits)
  drm/i915/display: Do not re-enable PSR after it was marked as not reliable
  drm/i915/display: Fix HPD short pulse handling for eDP
  drm/amdgpu: Use drm_mode_copy()
  drm/radeon: Use drm_mode_copy()
  drm/amdgpu: Use ternary operator in `vcn_v1_0_start()`
  drm/amdgpu: Remove pointless on stack mode copies
  drm/amd/pm: fix indenting in __smu_cmn_reg_print_error()
  drm/amdgpu/dc: fix typos in comments
  drm/amdgpu: fix typos in comments
  drm/amd/pm: fix typos in comments
  drm/amdgpu: Add stolen reserved memory for MI25 SRIOV.
  drm/amdgpu: Merge get_reserved_allocation to get_vbios_allocations.
  drm/amdkfd: evict svm bo worker handle error
  drm/amdgpu/vcn: fix vcn ring test failure in igt reload test
  drm/amdgpu: only allow secure submission on rings which support that
  drm/amdgpu: fixed the warnings reported by kernel test robot
  drm/amd/display: 3.2.177
  drm/amd/display: [FW Promotion] Release 0.0.108.0
  drm/amd/display: Add save/restore PANEL_PWRSEQ_REF_DIV2
  drm/amd/display: Wait for hubp read line for Pollock
  ...

Author: torvalds

Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml

@@ -83,6 +83,9 @@ properties:
     type: boolean
     description: let the driver enable audio HDMI codec function or not.
 
+  aux-bus:
+    $ref: /schemas/display/dp-aux-bus.yaml#
+
   ports:
     $ref: /schemas/graph.yaml#/properties/ports
 
@@ -150,5 +153,19 @@ examples:
                     };
                 };
             };
+
+            aux-bus {
+                panel {
+                    compatible = "innolux,n125hce-gn1";
+                    power-supply = <&pp3300_disp_x>;
+                    backlight = <&backlight_lcd0>;
+
+                    port {
+                        panel_in: endpoint {
+                            remote-endpoint = <&anx7625_out>;
+                        };
+                    };
+                };
+            };
         };
     };

Documentation/devicetree/bindings/display/bridge/ingenic,jz4780-hdmi.yaml

@@ -0,0 +1,82 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/ingenic,jz4780-hdmi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Bindings for Ingenic JZ4780 HDMI Transmitter
+
+maintainers:
+  - H. Nikolaus Schaller <hns@goldelico.com>
+
+description: |
+  The HDMI Transmitter in the Ingenic JZ4780 is a Synopsys DesignWare HDMI 1.4
+  TX controller IP with accompanying PHY IP.
+
+allOf:
+  - $ref: synopsys,dw-hdmi.yaml#
+
+properties:
+  compatible:
+    const: ingenic,jz4780-dw-hdmi
+
+  reg-io-width:
+    const: 4
+
+  clocks:
+    maxItems: 2
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Input from LCD controller output.
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Link to the HDMI connector.
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - ports
+  - reg-io-width
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/ingenic,jz4780-cgu.h>
+
+    hdmi: hdmi@10180000 {
+        compatible = "ingenic,jz4780-dw-hdmi";
+        reg = <0x10180000 0x8000>;
+        reg-io-width = <4>;
+        ddc-i2c-bus = <&i2c4>;
+        interrupt-parent = <&intc>;
+        interrupts = <3>;
+        clocks = <&cgu JZ4780_CLK_AHB0>, <&cgu JZ4780_CLK_HDMI>;
+        clock-names = "iahb", "isfr";
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+            hdmi_in: port@0 {
+                reg = <0>;
+                dw_hdmi_in: endpoint {
+                    remote-endpoint = <&jz4780_lcd_out>;
+                };
+            };
+            hdmi_out: port@1 {
+                reg = <1>;
+                dw_hdmi_out: endpoint {
+                    remote-endpoint = <&hdmi_con>;
+                };
+            };
+        };
+    };
+
+...

Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml

@@ -39,6 +39,7 @@ properties:
           - const: lvds-encoder # Generic LVDS encoder compatible fallback
       - items:
           - enum:
+              - ti,ds90cf364a # For the DS90CF364A FPD-Link LVDS Receiver
               - ti,ds90cf384a # For the DS90CF384A FPD-Link LVDS Receiver
           - const: lvds-decoder # Generic LVDS decoders compatible fallback
       - enum:
@@ -67,7 +68,7 @@ properties:
                   - vesa-24
                 description: |
                   The color signals mapping order. See details in
-                  Documentation/devicetree/bindings/display/panel/lvds.yaml
+                  Documentation/devicetree/bindings/display/lvds.yaml
 
       port@1:
         $ref: /schemas/graph.yaml#/properties/port

Documentation/devicetree/bindings/display/bridge/renesas,lvds.yaml

@@ -28,6 +28,7 @@ properties:
       - renesas,r8a7793-lvds # for R-Car M2-N compatible LVDS encoders
       - renesas,r8a7795-lvds # for R-Car H3 compatible LVDS encoders
       - renesas,r8a7796-lvds # for R-Car M3-W compatible LVDS encoders
+      - renesas,r8a77961-lvds # for R-Car M3-W+ compatible LVDS encoders
       - renesas,r8a77965-lvds # for R-Car M3-N compatible LVDS encoders
       - renesas,r8a77970-lvds # for R-Car V3M compatible LVDS encoders
       - renesas,r8a77980-lvds # for R-Car V3H compatible LVDS encoders

Documentation/devicetree/bindings/display/bridge/ti,sn65dsi83.yaml

@@ -32,6 +32,9 @@ properties:
     maxItems: 1
     description: GPIO specifier for bridge_en pin (active high).
 
+  vcc-supply:
+    description: A 1.8V power supply (see regulator/regulator.yaml).
+
   ports:
     $ref: /schemas/graph.yaml#/properties/ports
 
@@ -91,7 +94,6 @@ properties:
 required:
   - compatible
   - reg
-  - enable-gpios
   - ports
 
 allOf:
@@ -133,6 +135,7 @@ examples:
             reg = <0x2d>;
 
             enable-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
+            vcc-supply = <&reg_sn65dsi83_1v8>;
 
             ports {
                 #address-cells = <1>;

…icetree/bindings/display/panel/lvds.yaml …on/devicetree/bindings/display/lvds.yamlDocumentation/devicetree/bindings/display/panel/lvds.yaml renamed to Documentation/devicetree/bindings/display/lvds.yaml Documentation/devicetree/bindings/display/panel/lvds.yaml renamed to Documentation/devicetree/bindings/display/lvds.yaml

@@ -1,10 +1,10 @@
 # SPDX-License-Identifier: GPL-2.0
 %YAML 1.2
 ---
-$id: http://devicetree.org/schemas/display/panel/lvds.yaml#
+$id: http://devicetree.org/schemas/display/lvds.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: LVDS Display Panel
+title: LVDS Display Common Properties
 
 maintainers:
   - Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
@@ -13,8 +13,8 @@ maintainers:
 description: |+
   LVDS is a physical layer specification defined in ANSI/TIA/EIA-644-A. Multiple
   incompatible data link layers have been used over time to transmit image data
-  to LVDS panels. This bindings supports display panels compatible with the
-  following specifications.
+  to LVDS devices. This bindings supports devices compatible with the following
+  specifications.
 
   [JEIDA] "Digital Interface Standards for Monitor", JEIDA-59-1999, February
   1999 (Version 1.0), Japan Electronic Industry Development Association (JEIDA)
@@ -26,18 +26,7 @@ description: |+
   Device compatible with those specifications have been marketed under the
   FPD-Link and FlatLink brands.
 
-allOf:
-  - $ref: panel-common.yaml#
-
 properties:
-  compatible:
-    contains:
-      const: panel-lvds
-    description:
-      Shall contain "panel-lvds" in addition to a mandatory panel-specific
-      compatible string defined in individual panel bindings. The "panel-lvds"
-      value shall never be used on its own.
-
   data-mapping:
     enum:
       - jeida-18
@@ -96,22 +85,6 @@ properties:
       If set, reverse the bit order described in the data mappings below on all
       data lanes, transmitting bits for slots 6 to 0 instead of 0 to 6.
 
-  port: true
-  ports: true
-
-required:
-  - compatible
-  - data-mapping
-  - width-mm
-  - height-mm
-  - panel-timing
-
-oneOf:
-  - required:
-      - port
-  - required:
-      - ports
-
 additionalProperties: true
 
 ...

Documentation/devicetree/bindings/display/mediatek/mediatek,aal.yaml

@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/mediatek/mediatek,aal.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek display adaptive ambient light processor
+
+maintainers:
+  - Chun-Kuang Hu <chunkuang.hu@kernel.org>
+  - Philipp Zabel <p.zabel@pengutronix.de>
+
+description: |
+  Mediatek display adaptive ambient light processor, namely AAL,
+  is responsible for backlight power saving and sunlight visibility improving.
+  AAL device node must be siblings to the central MMSYS_CONFIG node.
+  For a description of the MMSYS_CONFIG binding, see
+  Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml
+  for details.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: mediatek,mt8173-disp-aal
+      - items:
+          - enum:
+              - mediatek,mt2712-disp-aal
+              - mediatek,mt8183-disp-aal
+              - mediatek,mt8192-disp-aal
+              - mediatek,mt8195-disp-aal
+          - enum:
+              - mediatek,mt8173-disp-aal
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  power-domains:
+    description: A phandle and PM domain specifier as defined by bindings of
+      the power controller specified by phandle. See
+      Documentation/devicetree/bindings/power/power-domain.yaml for details.
+
+  clocks:
+    items:
+      - description: AAL Clock
+
+  mediatek,gce-client-reg:
+    description: The register of client driver can be configured by gce with
+      4 arguments defined in this property, such as phandle of gce, subsys id,
+      register offset and size. Each GCE subsys id is mapping to a client
+      defined in the header include/dt-bindings/gce/<chip>-gce.h.
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - power-domains
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+
+    aal@14015000 {
+        compatible = "mediatek,mt8173-disp-aal";
+        reg = <0 0x14015000 0 0x1000>;
+        interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_LOW>;
+        power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+        clocks = <&mmsys CLK_MM_DISP_AAL>;
+        mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x5000 0x1000>;
+    };

Documentation/devicetree/bindings/display/mediatek/mediatek,ccorr.yaml

@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/mediatek/mediatek,ccorr.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek display color correction
+
+maintainers:
+  - Chun-Kuang Hu <chunkuang.hu@kernel.org>
+  - Philipp Zabel <p.zabel@pengutronix.de>
+
+description: |
+  Mediatek display color correction, namely CCORR, reproduces correct color
+  on panels with different color gamut.
+  CCORR device node must be siblings to the central MMSYS_CONFIG node.
+  For a description of the MMSYS_CONFIG binding, see
+  Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml
+  for details.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: mediatek,mt8183-disp-ccorr
+      - items:
+          - const: mediatek,mt8192-disp-ccorr
+      - items:
+          - enum:
+              - mediatek,mt8195-disp-ccorr
+          - enum:
+              - mediatek,mt8192-disp-ccorr
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  power-domains:
+    description: A phandle and PM domain specifier as defined by bindings of
+      the power controller specified by phandle. See
+      Documentation/devicetree/bindings/power/power-domain.yaml for details.
+
+  clocks:
+    items:
+      - description: CCORR Clock
+
+  mediatek,gce-client-reg:
+    description: The register of client driver can be configured by gce with
+      4 arguments defined in this property, such as phandle of gce, subsys id,
+      register offset and size. Each GCE subsys id is mapping to a client
+      defined in the header include/dt-bindings/gce/<chip>-gce.h.
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - power-domains
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+
+    ccorr0: ccorr@1400f000 {
+        compatible = "mediatek,mt8183-disp-ccorr";
+        reg = <0 0x1400f000 0 0x1000>;
+        interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_LOW>;
+        power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
+        clocks = <&mmsys CLK_MM_DISP_CCORR0>;
+        mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xf000 0x1000>;
+    };