xen/pvh: Setup gsi for passthrough device

In PVH dom0, the gsis don't get registered, but the gsi of
a passthrough device must be configured for it to be able to be
mapped into a domU.

When assigning a device to passthrough, proactively setup the gsi
of the device during that process.

Signed-off-by: Jiqian Chen <Jiqian.Chen@amd.com>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Jiqian Chen <Jiqian.Chen@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Message-ID: <20240924061437.2636766-3-Jiqian.Chen@amd.com>
Signed-off-by: Juergen Gross <jgross@suse.com>

Author: Jiqian Chen

arch/x86/xen/enlighten_pvh.c

@@ -4,6 +4,7 @@
 #include <linux/mm.h>
 
 #include <xen/hvc-console.h>
+#include <xen/acpi.h>
 
 #include <asm/bootparam.h>
 #include <asm/io_apic.h>
@@ -28,6 +29,28 @@
 bool __ro_after_init xen_pvh;
 EXPORT_SYMBOL_GPL(xen_pvh);
 
+#ifdef CONFIG_XEN_DOM0
+int xen_pvh_setup_gsi(int gsi, int trigger, int polarity)
+{
+	int ret;
+	struct physdev_setup_gsi setup_gsi;
+
+	setup_gsi.gsi = gsi;
+	setup_gsi.triggering = (trigger == ACPI_EDGE_SENSITIVE ? 0 : 1);
+	setup_gsi.polarity = (polarity == ACPI_ACTIVE_HIGH ? 0 : 1);
+
+	ret = HYPERVISOR_physdev_op(PHYSDEVOP_setup_gsi, &setup_gsi);
+	if (ret == -EEXIST) {
+		xen_raw_printk("Already setup the GSI :%d\n", gsi);
+		ret = 0;
+	} else if (ret)
+		xen_raw_printk("Fail to setup GSI (%d)!\n", gsi);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(xen_pvh_setup_gsi);
+#endif
+
 /*
  * Reserve e820 UNUSABLE regions to inflate the memory balloon.
  *

drivers/acpi/pci_irq.c

@@ -288,7 +288,7 @@ static int acpi_reroute_boot_interrupt(struct pci_dev *dev,
 }
 #endif /* CONFIG_X86_IO_APIC */
 
-static struct acpi_prt_entry *acpi_pci_irq_lookup(struct pci_dev *dev, int pin)
+struct acpi_prt_entry *acpi_pci_irq_lookup(struct pci_dev *dev, int pin)
 {
 	struct acpi_prt_entry *entry = NULL;
 	struct pci_dev *bridge;

drivers/xen/acpi.c

@@ -30,6 +30,7 @@
  * IN THE SOFTWARE.
  */
 
+#include <linux/pci.h>
 #include <xen/acpi.h>
 #include <xen/interface/platform.h>
 #include <asm/xen/hypercall.h>
@@ -75,3 +76,52 @@ int xen_acpi_notify_hypervisor_extended_sleep(u8 sleep_state,
 	return xen_acpi_notify_hypervisor_state(sleep_state, val_a,
 						val_b, true);
 }
+
+struct acpi_prt_entry {
+	struct acpi_pci_id      id;
+	u8                      pin;
+	acpi_handle             link;
+	u32                     index;
+};
+
+int xen_acpi_get_gsi_info(struct pci_dev *dev,
+						  int *gsi_out,
+						  int *trigger_out,
+						  int *polarity_out)
+{
+	int gsi;
+	u8 pin;
+	struct acpi_prt_entry *entry;
+	int trigger = ACPI_LEVEL_SENSITIVE;
+	int polarity = acpi_irq_model == ACPI_IRQ_MODEL_GIC ?
+				      ACPI_ACTIVE_HIGH : ACPI_ACTIVE_LOW;
+
+	if (!dev || !gsi_out || !trigger_out || !polarity_out)
+		return -EINVAL;
+
+	pin = dev->pin;
+	if (!pin)
+		return -EINVAL;
+
+	entry = acpi_pci_irq_lookup(dev, pin);
+	if (entry) {
+		if (entry->link)
+			gsi = acpi_pci_link_allocate_irq(entry->link,
+							 entry->index,
+							 &trigger, &polarity,
+							 NULL);
+		else
+			gsi = entry->index;
+	} else
+		gsi = -1;
+
+	if (gsi < 0)
+		return -EINVAL;
+
+	*gsi_out = gsi;
+	*trigger_out = trigger;
+	*polarity_out = polarity;
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(xen_acpi_get_gsi_info);

drivers/xen/xen-pciback/pci_stub.c

@@ -21,6 +21,9 @@
 #include <xen/events.h>
 #include <xen/pci.h>
 #include <xen/xen.h>
+#ifdef CONFIG_XEN_ACPI
+#include <xen/acpi.h>
+#endif
 #include <asm/xen/hypervisor.h>
 #include <xen/interface/physdev.h>
 #include "pciback.h"
@@ -367,6 +370,9 @@ static int pcistub_match(struct pci_dev *dev)
 static int pcistub_init_device(struct pci_dev *dev)
 {
 	struct xen_pcibk_dev_data *dev_data;
+#ifdef CONFIG_XEN_ACPI
+	int gsi, trigger, polarity;
+#endif
 	int err = 0;
 
 	dev_dbg(&dev->dev, "initializing...\n");
@@ -435,6 +441,20 @@ static int pcistub_init_device(struct pci_dev *dev)
 			goto config_release;
 		pci_restore_state(dev);
 	}
+
+#ifdef CONFIG_XEN_ACPI
+	if (xen_initial_domain() && xen_pvh_domain()) {
+		err = xen_acpi_get_gsi_info(dev, &gsi, &trigger, &polarity);
+		if (err) {
+			dev_err(&dev->dev, "Fail to get gsi info!\n");
+			goto config_release;
+		}
+		err = xen_pvh_setup_gsi(gsi, trigger, polarity);
+		if (err)
+			goto config_release;
+	}
+#endif
+
 	/* Now disable the device (this also ensures some private device
 	 * data is setup before we export)
 	 */

include/linux/acpi.h

@@ -362,6 +362,7 @@ void acpi_unregister_gsi (u32 gsi);
 
 struct pci_dev;
 
+struct acpi_prt_entry *acpi_pci_irq_lookup(struct pci_dev *dev, int pin);
 int acpi_pci_irq_enable (struct pci_dev *dev);
 void acpi_penalize_isa_irq(int irq, int active);
 bool acpi_isa_irq_available(int irq);

include/xen/acpi.h

@@ -67,10 +67,28 @@ static inline void xen_acpi_sleep_register(void)
 		acpi_suspend_lowlevel = xen_acpi_suspend_lowlevel;
 	}
 }
+int xen_pvh_setup_gsi(int gsi, int trigger, int polarity);
+int xen_acpi_get_gsi_info(struct pci_dev *dev,
+						  int *gsi_out,
+						  int *trigger_out,
+						  int *polarity_out);
 #else
 static inline void xen_acpi_sleep_register(void)
 {
 }
+
+static inline int xen_pvh_setup_gsi(int gsi, int trigger, int polarity)
+{
+	return -1;
+}
+
+static inline int xen_acpi_get_gsi_info(struct pci_dev *dev,
+						  int *gsi_out,
+						  int *trigger_out,
+						  int *polarity_out)
+{
+	return -1;
+}
 #endif
 
 #endif	/* _XEN_ACPI_H */