arm64: dts: mt8365-evk: Add goodix touchscreen support

The Mediatek Genio 350-EVK board has on the DSI0 connector a StarTek
KD070FHFID015 display panel that uses a Goodix GT9271 I2C capacitive
touch controller.

The mt8365-evk devicetree already have the display panel support but
lacks the touchscreen support, so add it.

Signed-off-by: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
Link: https://lore.kernel.org/r/20250515-mt8365-evk-enable-touchscreen-v1-1-7ba3c87b2a71@collabora.com
[Angelo: Reordered regulator nodes and interurpts-extended property]
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>

Author: laeyraud

arch/arm64/boot/dts/mediatek/mt8365-evk.dts

@@ -78,6 +78,21 @@
 		enable-active-high;
 	};
 
+	reg_vsys: regulator-vsys {
+		compatible = "regulator-fixed";
+		regulator-name = "vsys";
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	touch0_fixed_3v3: regulator-vio33tp {
+		compatible = "regulator-fixed";
+		regulator-name = "vio33_tp";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&reg_vsys>;
+	};
+
 	reserved-memory {
 		#address-cells = <2>;
 		#size-cells = <2>;
@@ -324,6 +339,18 @@
 			};
 		};
 	};
+
+	touchscreen@5d {
+		compatible = "goodix,gt9271";
+		reg = <0x5d>;
+		interrupts-extended = <&pio 78 IRQ_TYPE_EDGE_FALLING>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&touch_pins>;
+		irq-gpios = <&pio 78 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&pio 79 GPIO_ACTIVE_LOW>;
+		AVDD28-supply = <&touch0_fixed_3v3>;
+		VDDIO-supply = <&mt6357_vrf12_reg>;
+	};
 };
 
 &mmc0 {
@@ -650,6 +677,19 @@
 		};
 	};
 
+	touch_pins: touch-pins {
+		ctp-int1-pins {
+			pinmux = <MT8365_PIN_78_CMHSYNC__FUNC_GPIO78>;
+			input-enable;
+			bias-disable;
+		};
+
+		rst-pins {
+			pinmux = <MT8365_PIN_79_CMVSYNC__FUNC_GPIO79>;
+			output-low;
+		};
+	};
+
 	uart0_pins: uart0-pins {
 		pins {
 			pinmux = <MT8365_PIN_35_URXD0__FUNC_URXD0>,