Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

Pull input updates from Dmitry Torokhov:
 "Updates to Goodix touchscreen driver (addition of pen support) and
  Silead touchscreen driver (also addition of pen support and parsing of
  embedded firmware to determine screen size), along with assorted fixes
  for other drivers"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: ti_am335x_tsc - fix a typo in a comment
  Input: zinitix - add compatible for bt532
  Input: zinitix - handle proper supply names
  dt-bindings: input/ts/zinitix: Convert to YAML, fix and extend
  Input: axp20x-pek - revert "always register interrupt handlers" change
  Input: gpio-keys - avoid clearing twice some memory
  Input: byd - fix typo in a comment
  Input: ucb1400_ts - remove redundant variable penup
  Input: ti_am335x_tsc - lower the X and Y sampling time
  Input: ti_am335x_tsc - fix STEPCONFIG setup for Z2
  Input: ti_am335x_tsc - set ADCREFM for X configuration
  Input: silead - add pen support
  Input: silead - add support for EFI-embedded fw using different min/max coordinates
  Input: goodix - 2 small fixes for pen support
  Input: goodix - improve gpiod_get() error logging
  Input: goodix - add pen support
  Input: ff-core - correct magnitude setting for rumble compatibility
  Input: palmas-pwrbutton - make a couple of arrays static const
  Input: wacom_i2c - clean up the query device fields
  Input: palmas-pwrbutton - use bitfield helpers

Author: torvalds

Documentation/devicetree/bindings/input/touchscreen/zinitix,bt400.yaml

@@ -0,0 +1,115 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/zinitix,bt400.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Zinitix BT4xx and BT5xx series touchscreen controller bindings
+
+description: The Zinitix BT4xx and BT5xx series of touchscreen controllers
+  are Korea-produced touchscreens with embedded microcontrollers. The
+  BT4xx series was produced 2010-2013 and the BT5xx series 2013-2014.
+
+maintainers:
+  - Michael Srba <Michael.Srba@seznam.cz>
+  - Linus Walleij <linus.walleij@linaro.org>
+
+allOf:
+  - $ref: touchscreen.yaml#
+
+properties:
+  $nodename:
+    pattern: "^touchscreen(@.*)?$"
+
+  compatible:
+    enum:
+      - zinitix,bt402
+      - zinitix,bt403
+      - zinitix,bt404
+      - zinitix,bt412
+      - zinitix,bt413
+      - zinitix,bt431
+      - zinitix,bt432
+      - zinitix,bt531
+      - zinitix,bt532
+      - zinitix,bt538
+      - zinitix,bt541
+      - zinitix,bt548
+      - zinitix,bt554
+      - zinitix,at100
+
+  reg:
+    description: I2C address on the I2C bus
+
+  clock-frequency:
+    description: I2C client clock frequency, defined for host when using
+      the device on the I2C bus
+    minimum: 0
+    maximum: 400000
+
+  interrupts:
+    description: Interrupt to host
+    maxItems: 1
+
+  vcca-supply:
+    description: Analog power supply regulator on the VCCA pin
+
+  vdd-supply:
+    description: Digital power supply regulator on the VDD pin.
+      In older device trees this can be the accidental name for the analog
+      supply on the VCCA pin, and in that case the deprecated vddo-supply is
+      used for the digital power supply.
+
+  vddo-supply:
+    description: Deprecated name for the digital power supply, use vdd-supply
+      as this reflects the real name of the pin. If this supply is present,
+      the vdd-supply represents VCCA instead of VDD. Implementers should first
+      check for this property, and if it is present assume that the vdd-supply
+      represents the analog supply.
+    deprecated: true
+
+  reset-gpios:
+    description: Reset line for the touchscreen, should be tagged
+      as GPIO_ACTIVE_LOW
+
+  zinitix,mode:
+    description: Mode of reporting touch points. Some modes may not work
+      with a particular ts firmware for unknown reasons. Available modes are
+      1 and 2. Mode 2 is the default and preferred.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [1, 2]
+
+  touchscreen-size-x: true
+  touchscreen-size-y: true
+  touchscreen-fuzz-x: true
+  touchscreen-fuzz-y: true
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - touchscreen-size-x
+  - touchscreen-size-y
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/gpio/gpio.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      touchscreen@20 {
+        compatible = "zinitix,bt541";
+        reg = <0x20>;
+        interrupt-parent = <&gpio>;
+        interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
+        vcca-supply = <&reg_vcca_tsp>;
+        vdd-supply = <&reg_vdd_tsp>;
+        touchscreen-size-x = <540>;
+        touchscreen-size-y = <960>;
+        zinitix,mode = <2>;
+      };
+    };

Documentation/devicetree/bindings/input/touchscreen/zinitix.txt

@@ -67,7 +67,7 @@ static int compat_effect(struct ff_device *ff, struct ff_effect *effect)
 		effect->type = FF_PERIODIC;
 		effect->u.periodic.waveform = FF_SINE;
 		effect->u.periodic.period = 50;
-		effect->u.periodic.magnitude = max(magnitude, 0x7fff);
+		effect->u.periodic.magnitude = magnitude;
 		effect->u.periodic.offset = 0;
 		effect->u.periodic.phase = 0;
 		effect->u.periodic.envelope.attack_length = 0;

drivers/input/ff-core.c

@@ -247,7 +247,7 @@ static ssize_t gpio_keys_attr_store_helper(struct gpio_keys_drvdata *ddata,
 	ssize_t error;
 	int i;
 
-	bits = bitmap_zalloc(n_events, GFP_KERNEL);
+	bits = bitmap_alloc(n_events, GFP_KERNEL);
 	if (!bits)
 		return -ENOMEM;
 

drivers/input/keyboard/gpio_keys.c

@@ -206,11 +206,8 @@ ATTRIBUTE_GROUPS(axp20x);
 
 static irqreturn_t axp20x_pek_irq(int irq, void *pwr)
 {
-	struct axp20x_pek *axp20x_pek = pwr;
-	struct input_dev *idev = axp20x_pek->input;
-
-	if (!idev)
-		return IRQ_HANDLED;
+	struct input_dev *idev = pwr;
+	struct axp20x_pek *axp20x_pek = input_get_drvdata(idev);
 
 	/*
 	 * The power-button is connected to ground so a falling edge (dbf)
@@ -229,9 +226,22 @@ static irqreturn_t axp20x_pek_irq(int irq, void *pwr)
 static int axp20x_pek_probe_input_device(struct axp20x_pek *axp20x_pek,
 					 struct platform_device *pdev)
 {
+	struct axp20x_dev *axp20x = axp20x_pek->axp20x;
 	struct input_dev *idev;
 	int error;
 
+	axp20x_pek->irq_dbr = platform_get_irq_byname(pdev, "PEK_DBR");
+	if (axp20x_pek->irq_dbr < 0)
+		return axp20x_pek->irq_dbr;
+	axp20x_pek->irq_dbr = regmap_irq_get_virq(axp20x->regmap_irqc,
+						  axp20x_pek->irq_dbr);
+
+	axp20x_pek->irq_dbf = platform_get_irq_byname(pdev, "PEK_DBF");
+	if (axp20x_pek->irq_dbf < 0)
+		return axp20x_pek->irq_dbf;
+	axp20x_pek->irq_dbf = regmap_irq_get_virq(axp20x->regmap_irqc,
+						  axp20x_pek->irq_dbf);
+
 	axp20x_pek->input = devm_input_allocate_device(&pdev->dev);
 	if (!axp20x_pek->input)
 		return -ENOMEM;
@@ -246,13 +256,33 @@ static int axp20x_pek_probe_input_device(struct axp20x_pek *axp20x_pek,
 
 	input_set_drvdata(idev, axp20x_pek);
 
+	error = devm_request_any_context_irq(&pdev->dev, axp20x_pek->irq_dbr,
+					     axp20x_pek_irq, 0,
+					     "axp20x-pek-dbr", idev);
+	if (error < 0) {
+		dev_err(&pdev->dev, "Failed to request dbr IRQ#%d: %d\n",
+			axp20x_pek->irq_dbr, error);
+		return error;
+	}
+
+	error = devm_request_any_context_irq(&pdev->dev, axp20x_pek->irq_dbf,
+					  axp20x_pek_irq, 0,
+					  "axp20x-pek-dbf", idev);
+	if (error < 0) {
+		dev_err(&pdev->dev, "Failed to request dbf IRQ#%d: %d\n",
+			axp20x_pek->irq_dbf, error);
+		return error;
+	}
+
 	error = input_register_device(idev);
 	if (error) {
 		dev_err(&pdev->dev, "Can't register input device: %d\n",
 			error);
 		return error;
 	}
 
+	device_init_wakeup(&pdev->dev, true);
+
 	return 0;
 }
 
@@ -293,18 +323,6 @@ static int axp20x_pek_probe(struct platform_device *pdev)
 
 	axp20x_pek->axp20x = dev_get_drvdata(pdev->dev.parent);
 
-	axp20x_pek->irq_dbr = platform_get_irq_byname(pdev, "PEK_DBR");
-	if (axp20x_pek->irq_dbr < 0)
-		return axp20x_pek->irq_dbr;
-	axp20x_pek->irq_dbr = regmap_irq_get_virq(
-			axp20x_pek->axp20x->regmap_irqc, axp20x_pek->irq_dbr);
-
-	axp20x_pek->irq_dbf = platform_get_irq_byname(pdev, "PEK_DBF");
-	if (axp20x_pek->irq_dbf < 0)
-		return axp20x_pek->irq_dbf;
-	axp20x_pek->irq_dbf = regmap_irq_get_virq(
-			axp20x_pek->axp20x->regmap_irqc, axp20x_pek->irq_dbf);
-
 	if (axp20x_pek_should_register_input(axp20x_pek)) {
 		error = axp20x_pek_probe_input_device(axp20x_pek, pdev);
 		if (error)
@@ -313,26 +331,6 @@ static int axp20x_pek_probe(struct platform_device *pdev)
 
 	axp20x_pek->info = (struct axp20x_info *)match->driver_data;
 
-	error = devm_request_any_context_irq(&pdev->dev, axp20x_pek->irq_dbr,
-					     axp20x_pek_irq, 0,
-					     "axp20x-pek-dbr", axp20x_pek);
-	if (error < 0) {
-		dev_err(&pdev->dev, "Failed to request dbr IRQ#%d: %d\n",
-			axp20x_pek->irq_dbr, error);
-		return error;
-	}
-
-	error = devm_request_any_context_irq(&pdev->dev, axp20x_pek->irq_dbf,
-					  axp20x_pek_irq, 0,
-					  "axp20x-pek-dbf", axp20x_pek);
-	if (error < 0) {
-		dev_err(&pdev->dev, "Failed to request dbf IRQ#%d: %d\n",
-			axp20x_pek->irq_dbf, error);
-		return error;
-	}
-
-	device_init_wakeup(&pdev->dev, true);
-
 	platform_set_drvdata(pdev, axp20x_pek);
 
 	return 0;

drivers/input/misc/axp20x-pek.c

@@ -15,6 +15,7 @@
  * GNU General Public License for more details.
  */
 
+#include <linux/bitfield.h>
 #include <linux/init.h>
 #include <linux/input.h>
 #include <linux/interrupt.h>
@@ -115,8 +116,8 @@ static void palmas_pwron_params_ofinit(struct device *dev,
 	struct device_node *np;
 	u32 val;
 	int i, error;
-	u8 lpk_times[] = { 6, 8, 10, 12 };
-	int pwr_on_deb_ms[] = { 15, 100, 500, 1000 };
+	static const u8 lpk_times[] = { 6, 8, 10, 12 };
+	static const int pwr_on_deb_ms[] = { 15, 100, 500, 1000 };
 
 	memset(config, 0, sizeof(*config));
 
@@ -192,8 +193,8 @@ static int palmas_pwron_probe(struct platform_device *pdev)
 	 * Setup default hardware shutdown option (long key press)
 	 * and debounce.
 	 */
-	val = config.long_press_time_val << __ffs(PALMAS_LPK_TIME_MASK);
-	val |= config.pwron_debounce_val << __ffs(PALMAS_PWRON_DEBOUNCE_MASK);
+	val = FIELD_PREP(PALMAS_LPK_TIME_MASK, config.long_press_time_val) |
+	      FIELD_PREP(PALMAS_PWRON_DEBOUNCE_MASK, config.pwron_debounce_val);
 	error = palmas_update_bits(palmas, PALMAS_PMU_CONTROL_BASE,
 				   PALMAS_LONG_PRESS_KEY,
 				   PALMAS_LPK_TIME_MASK |

drivers/input/misc/palmas-pwrbutton.c

@@ -191,7 +191,7 @@
 
 /*
  * The touchpad generates a mixture of absolute and relative packets, indicated
- * by the the last byte of each packet being set to one of the following:
+ * by the last byte of each packet being set to one of the following:
  */
 #define BYD_PACKET_ABSOLUTE			0xf8
 #define BYD_PACKET_RELATIVE			0x00