Merge tag 'sound-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound

Pull sound updates from Takashi Iwai:
 "No surprises in this development cycle, and most of work is about the
  fixes and the improvements of the existing code, while a new LED
  control layer and a few new drivers have been introduced.

  Here are some highlights:

  Core:
   - A common mute-LED framework was introduced. It is used by HD-audio
     for now, more adaption will follow later. The former "Mic Mute-LED
     Mode" mixer control has been replaced with the corresponding sysfs
     now.
   - User-control management was changed to count consumed bytes instead
     of capping by number of elements; this will allow more controls in
     the normal usage pattern while avoiding the possible memory
     exhaustion DoS

  ASoC:
   - Continued refactoring and cleanups in ASoC core and generic card
     drivers
   - Wide range of small cppcheck and warning fixes
   - New drivers for Freescale i.MX DMA over rpmsg, Mediatek MT6358
     accessory detection, and Realtek RT1019, RT1316, RT711 and RT715

  USB-audio:
   - Continued improvements and fixes of the implicit feedback mode,
     including better support for Pioneer and Roland/BOSS devices

  HD-audio:
   - Default back to non-buffer preallocation on x86
   - Cirrus codec improvements, more quirks for Realtek codecs

  Others:
   - New virtio sound driver
   - FireWire Bebob updates"

* tag 'sound-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (587 commits)
  ALSA: hda/conexant: Re-order CX5066 quirk table entries
  ALSA: hda/realtek: Remove redundant entry for ALC861 Haier/Uniwill devices
  ALSA: hda/realtek: Re-order ALC662 quirk table entries
  ALSA: hda/realtek: Re-order remaining ALC269 quirk table entries
  ALSA: hda/realtek: Re-order ALC269 Lenovo quirk table entries
  ALSA: hda/realtek: Re-order ALC269 Sony quirk table entries
  ALSA: hda/realtek: Re-order ALC269 ASUS quirk table entries
  ALSA: hda/realtek: Re-order ALC269 Dell quirk table entries
  ALSA: hda/realtek: Re-order ALC269 Acer quirk table entries
  ALSA: hda/realtek: Re-order ALC269 HP quirk table entries
  ALSA: hda/realtek: Re-order ALC882 Clevo quirk table entries
  ALSA: hda/realtek: Re-order ALC882 Sony quirk table entries
  ALSA: hda/realtek: Re-order ALC882 Acer quirk table entries
  ALSA: usb-audio: Remove redundant assignment to len
  ALSA: hda/realtek: Add quirk for Intel Clevo PCx0Dx
  ALSA: virtio: fix kernel-doc
  ALSA: hda/cirrus: Use CS8409 filter to fix abnormal sounds on Bullseye
  ALSA: hda/cirrus: Set Initial DMIC volume for Bullseye to -26 dB
  ALSA: sb: Fix two use after free in snd_sb_qsound_build
  ALSA: emu8000: Fix a use after free in snd_emu8000_create_mixer
  ...

Author: torvalds

Documentation/devicetree/bindings/sound/ak5558.txt

@@ -4,7 +4,7 @@ This device supports I2C mode only.
 
 Required properties:
 
-- compatible : "asahi-kasei,ak5558"
+- compatible : "asahi-kasei,ak5558" or "asahi-kasei,ak5552".
 - reg : The I2C address of the device.
 
 Optional properties:

Documentation/devicetree/bindings/sound/audio-graph-port.yaml

@@ -11,71 +11,59 @@ maintainers:
 
 select: false
 
+allOf:
+  - $ref: /schemas/graph.yaml#/$defs/port-base
+
 properties:
-  port:
-    description: single OF-Graph subnode
-    type: object
+  prefix:
+    description: "device name prefix"
+    $ref: /schemas/types.yaml#/definitions/string
+  convert-rate:
+    description: CPU to Codec rate convert.
+    $ref: /schemas/types.yaml#/definitions/uint32
+  convert-channels:
+    description: CPU to Codec rate channels.
+    $ref: /schemas/types.yaml#/definitions/uint32
+patternProperties:
+  "^endpoint(@[0-9a-f]+)?":
+    $ref: /schemas/graph.yaml#/$defs/endpoint-base
     properties:
-      reg:
-        maxItems: 1
-      prefix:
-        description: "device name prefix"
-        $ref: /schemas/types.yaml#/definitions/string
+      mclk-fs:
+        description: |
+          Multiplication factor between stream rate and codec mclk.
+          When defined, mclk-fs property defined in dai-link sub nodes are
+          ignored.
+        $ref: /schemas/types.yaml#/definitions/uint32
+      frame-inversion:
+        description: dai-link uses frame clock inversion
+        $ref: /schemas/types.yaml#/definitions/flag
+      bitclock-inversion:
+        description: dai-link uses bit clock inversion
+        $ref: /schemas/types.yaml#/definitions/flag
+      frame-master:
+        description: Indicates dai-link frame master.
+        $ref: /schemas/types.yaml#/definitions/phandle
+      bitclock-master:
+        description: Indicates dai-link bit clock master
+        $ref: /schemas/types.yaml#/definitions/phandle
+      dai-format:
+        description: audio format.
+        items:
+          enum:
+            - i2s
+            - right_j
+            - left_j
+            - dsp_a
+            - dsp_b
+            - ac97
+            - pdm
+            - msb
+            - lsb
       convert-rate:
         description: CPU to Codec rate convert.
         $ref: /schemas/types.yaml#/definitions/uint32
       convert-channels:
         description: CPU to Codec rate channels.
         $ref: /schemas/types.yaml#/definitions/uint32
-    patternProperties:
-      "^endpoint(@[0-9a-f]+)?":
-        type: object
-        properties:
-          remote-endpoint:
-            maxItems: 1
-          mclk-fs:
-            description: |
-              Multiplication factor between stream rate and codec mclk.
-              When defined, mclk-fs property defined in dai-link sub nodes are
-              ignored.
-            $ref: /schemas/types.yaml#/definitions/uint32
-          frame-inversion:
-            description: dai-link uses frame clock inversion
-            $ref: /schemas/types.yaml#/definitions/flag
-          bitclock-inversion:
-            description: dai-link uses bit clock inversion
-            $ref: /schemas/types.yaml#/definitions/flag
-          frame-master:
-            description: Indicates dai-link frame master.
-            $ref: /schemas/types.yaml#/definitions/phandle
-          bitclock-master:
-            description: Indicates dai-link bit clock master
-            $ref: /schemas/types.yaml#/definitions/phandle
-          dai-format:
-            description: audio format.
-            items:
-              enum:
-                - i2s
-                - right_j
-                - left_j
-                - dsp_a
-                - dsp_b
-                - ac97
-                - pdm
-                - msb
-                - lsb
-          convert-rate:
-            description: CPU to Codec rate convert.
-            $ref: /schemas/types.yaml#/definitions/uint32
-          convert-channels:
-            description: CPU to Codec rate channels.
-            $ref: /schemas/types.yaml#/definitions/uint32
-
-  ports:
-    description: multi OF-Graph subnode
-    type: object
-    patternProperties:
-      "^port(@[0-9a-f]+)?":
-        $ref: "#/properties/port"
 
 additionalProperties: true

Documentation/devicetree/bindings/sound/fsl,rpmsg.yaml

@@ -0,0 +1,108 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/fsl,rpmsg.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP Audio RPMSG CPU DAI Controller
+
+maintainers:
+  - Shengjiu Wang <shengjiu.wang@nxp.com>
+
+description: |
+  fsl_rpmsg is a virtual audio device. Mapping to real hardware devices
+  are SAI, DMA controlled by Cortex M core. What we see from Linux
+  side is a device which provides audio service by rpmsg channel.
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx7ulp-rpmsg-audio
+      - fsl,imx8mn-rpmsg-audio
+      - fsl,imx8mm-rpmsg-audio
+      - fsl,imx8mp-rpmsg-audio
+
+  model:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: User specified audio sound card name
+
+  clocks:
+    items:
+      - description: Peripheral clock for register access
+      - description: Master clock
+      - description: DMA clock for DMA register access
+      - description: Parent clock for multiple of 8kHz sample rates
+      - description: Parent clock for multiple of 11kHz sample rates
+
+  clock-names:
+    items:
+      - const: ipg
+      - const: mclk
+      - const: dma
+      - const: pll8k
+      - const: pll11k
+
+  power-domains:
+    description:
+      List of phandle and PM domain specifier as documented in
+      Documentation/devicetree/bindings/power/power_domain.txt
+    maxItems: 1
+
+  memory-region:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      phandle to a node describing reserved memory (System RAM memory)
+      The M core can't access all the DDR memory space on some platform,
+      So reserved a specific memory for dma buffer which M core can
+      access.
+      (see bindings/reserved-memory/reserved-memory.txt)
+
+  audio-codec:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: The phandle to a node of audio codec
+
+  audio-routing:
+    $ref: /schemas/types.yaml#/definitions/non-unique-string-array
+    description: |
+      A list of the connections between audio components. Each entry is a
+      pair of strings, the first being the connection's sink, the second
+      being the connection's source.
+
+  fsl,enable-lpa:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: enable low power audio path.
+
+  fsl,rpmsg-out:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: |
+      This is a boolean property. If present, the transmitting function
+      will be enabled.
+
+  fsl,rpmsg-in:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: |
+      This is a boolean property. If present, the receiving function
+      will be enabled.
+
+required:
+  - compatible
+  - model
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx8mn-clock.h>
+
+    rpmsg_audio: rpmsg_audio {
+        compatible = "fsl,imx8mn-rpmsg-audio";
+        model = "wm8524-audio";
+        fsl,enable-lpa;
+        fsl,rpmsg-out;
+        clocks = <&clk IMX8MN_CLK_SAI3_IPG>,
+                 <&clk IMX8MN_CLK_SAI3_ROOT>,
+                 <&clk IMX8MN_CLK_SDMA3_ROOT>,
+                 <&clk IMX8MN_AUDIO_PLL1_OUT>,
+                 <&clk IMX8MN_AUDIO_PLL2_OUT>;
+        clock-names = "ipg", "mclk", "dma", "pll8k", "pll11k";
+    };

Documentation/devicetree/bindings/sound/fsl-asoc-card.txt

@@ -42,6 +42,8 @@ The compatible list for this generic sound card currently:
 
  "fsl,imx-audio-si476x"
 
+ "fsl,imx-audio-wm8958"
+
 Required properties:
 
   - compatible		: Contains one of entries in the compatible list.

Documentation/devicetree/bindings/sound/intel,keembay-i2s.yaml

@@ -81,6 +81,6 @@ examples:
          interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
          clock-names = "osc", "apb_clk";
          clocks = <&scmi_clk KEEM_BAY_PSS_AUX_I2S3>, <&scmi_clk KEEM_BAY_PSS_I2S3>;
-         dmas = <&axi_dma0 29 &axi_dma0 33>;
+         dmas = <&axi_dma0 29>, <&axi_dma0 33>;
          dma-names = "tx", "rx";
      };

Documentation/devicetree/bindings/sound/marvell,mmp-sspa.yaml

@@ -9,9 +9,6 @@ title: Marvel SSPA Digital Audio Interface Bindings
 maintainers:
   - Lubomir Rintel <lkundrak@v3.sk>
 
-allOf:
-  - $ref: audio-graph-port.yaml#
-
 properties:
   $nodename:
     pattern: "^audio-controller(@.*)?$"
@@ -54,7 +51,8 @@ properties:
       - const: rx
 
   port:
-    type: object
+    $ref: audio-graph-port.yaml#
+    unevaluatedProperties: false
 
     properties:
       endpoint:

Documentation/devicetree/bindings/sound/mchp,i2s-mcc.yaml

@@ -0,0 +1,108 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/mchp,i2s-mcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip I2S Multi-Channel Controller
+
+maintainers:
+  - Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
+
+description:
+  The I2SMCC complies with the Inter-IC Sound (I2S) bus specification and
+  supports a Time Division Multiplexed (TDM) interface with external
+  multi-channel audio codecs. It consists of a receiver, a transmitter and a
+  common clock generator that can be enabled separately to provide Adapter,
+  Client or Controller modes with receiver and/or transmitter active.
+  On later I2SMCC versions (starting with Microchip's SAMA7G5) I2S
+  multi-channel is supported by using multiple data pins, output and
+  input, without TDM.
+
+properties:
+  "#sound-dai-cells":
+    const: 0
+
+  compatible:
+    enum:
+      - microchip,sam9x60-i2smcc
+      - microchip,sama7g5-i2smcc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Peripheral Bus Clock
+      - description: Generic Clock (Optional). Should be set mostly when Master
+          Mode is required.
+    minItems: 1
+
+  clock-names:
+    items:
+      - const: pclk
+      - const: gclk
+    minItems: 1
+
+  dmas:
+    items:
+      - description: TX DMA Channel
+      - description: RX DMA Channel
+
+  dma-names:
+    items:
+      - const: tx
+      - const: rx
+
+  microchip,tdm-data-pair:
+    description:
+      Represents the DIN/DOUT pair pins that are used to receive/send
+      TDM data. It is optional and it is only needed if the controller
+      uses the TDM mode.
+    $ref: /schemas/types.yaml#/definitions/uint8
+    enum: [0, 1, 2, 3]
+    default: 0
+
+if:
+  properties:
+    compatible:
+      const: microchip,sam9x60-i2smcc
+then:
+  properties:
+    microchip,tdm-data-pair: false
+
+required:
+  - "#sound-dai-cells"
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - dmas
+  - dma-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/dma/at91.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    i2s@f001c000 {
+        #sound-dai-cells = <0>;
+        compatible = "microchip,sam9x60-i2smcc";
+        reg = <0xf001c000 0x100>;
+        interrupts = <34 IRQ_TYPE_LEVEL_HIGH 7>;
+        dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+                       AT91_XDMAC_DT_PERID(36))>,
+               <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+                       AT91_XDMAC_DT_PERID(37))>;
+        dma-names = "tx", "rx";
+        clocks = <&i2s_clk>, <&i2s_gclk>;
+        clock-names = "pclk", "gclk";
+        pinctrl-names = "default";
+        pinctrl-0 = <&pinctrl_i2s_default>;
+    };