Merge tag 'iio-for-6.12b' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next

Jonathan writes:

IIO: 2nd set of new device support features and cleanup for 6.12

Late pull request as I was planing to include another series that
is waiting for a fix to end up in char-misc-next.  That can wait
for next cycle.

Includes one immutable branch merge from MFD to get a necessary header
change.

Usual mix of a few new drivers, additional device support for existing
drivers, new features and a bunch of cleanup across tree.

New device support
==================

asahi-kasei,ak8975
- A few minor fixes as precursors to support for the AK09118 magnetometer
  that is very similar to the already supported AK09112
awinic,aw96103
- New driver for this capacitive proximity sensor.
x-powers,axp202
- Add support for the axp717 (including merge of MFD immutable branch).
sophgo,saradc
- New driver for this SOC ADC.

Features
========

adi,ad4695
- Add calibration support.
bosch,bmi323
- Ensure device is in lowest power state on suspend.

Cleanup and minor fixes
=======================
treewide
- Start to standardize formatting of id tables (ADC drivers done so far).
adi,ad5449
- Drop platform data support as long unused in upstream kernel.
bosch,bmc150
- Use fwnode_irq_get_by_name() in place of of_ variant.
- Use ACPI_HANDLE() to get the handle directly rather than via
  ACPI_COMPANION()
google,cros_ec_mkbp_proximity
- Include mod_devicetable.h instead of broader of.h
mirochip,mcp320x
- Drop vendorless compatible entries as not needed for backwards
  compatibility and should not be used in new boards.
st,lsm6dsx
- Use iio_read_acpi_mount_matrix() helper instead of open coding the
  same.
- Drop some unnecessary dev_fwnode() calls to check if a fwnode is
  available.  All the calls made handle this anyway.
xilinx,ams
- Use device_for_each_child_node_scoped() to avoid manual release of
  fwnode handle.

tools,generic-buffer
- Handle failure to allocate trigger name.
- Cleanup .*.cmd files if present.

* tag 'iio-for-6.12b' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (28 commits)
  iio: adc: axp20x_adc: add support for AXP717 ADC
  dt-bindings: iio: adc: Add AXP717 compatible
  iio: adc: axp20x_adc: Add adc_en1 and adc_en2 to axp_data
  tools: iio: rm .*.cmd when make clean
  iio: adc: standardize on formatting for id match tables
  iio: proximity: aw96103: Add support for aw96103/aw96105 proximity sensor
  dt-bindings: iio: aw96103: Add bindings for aw96103/aw96105 sensor
  iio: adc: sophgo-saradc: Add driver for Sophgo CV1800B SARADC
  dt-bindings: iio: adc: sophgo,cv1800b-saradc: Add Sophgo CV1800B SARADC
  tools/iio: Add memory allocation failure check for trigger_name
  iio: imu: st_lsm6dsx: Remove useless dev_fwnode() calls
  iio: imu: st_lsm6dsx: Use iio_read_acpi_mount_matrix() helper
  iio: adc: mcp320x: Drop vendorless compatible strings
  iio: dac: ad5449: drop support for platform data
  iio: adc: xilinx-ams: use device_* to iterate over device child nodes
  iio: ABI: document ad4695 new attributes
  doc: iio: ad4695: update for calibration support
  iio: adc: ad4695: implement calibration support
  iio: adc: ad4695: add 2nd regmap for 16-bit registers
  iio: bmi323: peripheral in lowest power state on suspend
  ...

Author: gregkh

Documentation/ABI/testing/sysfs-bus-iio

@@ -541,6 +541,7 @@ What:		/sys/bus/iio/devices/iio:deviceX/in_proximity_calibbias
 What:		/sys/bus/iio/devices/iio:deviceX/in_proximity0_calibbias
 What:		/sys/bus/iio/devices/iio:deviceX/in_resistance_calibbias
 What:		/sys/bus/iio/devices/iio:deviceX/in_temp_calibbias
+What:		/sys/bus/iio/devices/iio:deviceX/in_voltageY_calibbias
 What:		/sys/bus/iio/devices/iio:deviceX/out_currentY_calibbias
 What:		/sys/bus/iio/devices/iio:deviceX/out_voltageY_calibbias
 KernelVersion:	2.6.35
@@ -556,6 +557,7 @@ What:		/sys/bus/iio/devices/iio:deviceX/in_accel_calibbias_available
 What:		/sys/bus/iio/devices/iio:deviceX/in_anglvel_calibbias_available
 What:		/sys/bus/iio/devices/iio:deviceX/in_temp_calibbias_available
 What:		/sys/bus/iio/devices/iio:deviceX/in_proximity_calibbias_available
+What:		/sys/bus/iio/devices/iio:deviceX/in_voltageY_calibbias_available
 What:		/sys/bus/iio/devices/iio:deviceX/out_voltageY_calibbias_available
 KernelVersion:  5.8
 Contact:        linux-iio@vger.kernel.org
@@ -603,6 +605,7 @@ Description:
 What:		/sys/bus/iio/devices/iio:deviceX/in_illuminanceY_calibscale_available
 What:		/sys/bus/iio/devices/iio:deviceX/in_intensityY_calibscale_available
 What:		/sys/bus/iio/devices/iio:deviceX/in_proximityY_calibscale_available
+What:		/sys/bus/iio/devices/iio:deviceX/in_voltageY_calibscale_available
 KernelVersion:	4.8
 Contact:	linux-iio@vger.kernel.org
 Description:

Documentation/devicetree/bindings/iio/adc/sophgo,cv1800b-saradc.yaml

@@ -0,0 +1,83 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/sophgo,cv1800b-saradc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title:
+  Sophgo CV1800B SoC 3 channels Successive Approximation Analog to
+  Digital Converters
+
+maintainers:
+  - Thomas Bonnefille <thomas.bonnefille@bootlin.com>
+
+description:
+  Datasheet at https://github.com/sophgo/sophgo-doc/releases
+
+properties:
+  compatible:
+    const: sophgo,cv1800b-saradc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+patternProperties:
+  "^channel@[0-2]$":
+    $ref: adc.yaml
+
+    properties:
+      reg:
+        items:
+          - minimum: 0
+            maximum: 2
+
+    required:
+      - reg
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - '#address-cells'
+  - '#size-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/sophgo,cv1800.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    adc@30f0000 {
+        compatible = "sophgo,cv1800b-saradc";
+        reg = <0x030f0000 0x1000>;
+        clocks = <&clk CLK_SARADC>;
+        interrupts = <100 IRQ_TYPE_LEVEL_HIGH>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        channel@0 {
+            reg = <0>;
+        };
+
+        channel@1 {
+            reg = <1>;
+        };
+
+        channel@2 {
+            reg = <2>;
+        };
+    };

Documentation/devicetree/bindings/iio/adc/x-powers,axp209-adc.yaml

@@ -37,6 +37,17 @@ description: |
    3 | batt_dischrg_i
    4 | ts_v
 
+  AXP717
+  ------
+   0 | batt_v
+   1 | ts_v
+   2 | vbus_v
+   3 | vsys_v
+   4 | pmic_temp
+   5 | batt_chrg_i
+   6 | vmid_v
+   7 | bkup_batt_v
+
   AXP813
   ------
    0 | pmic_temp
@@ -52,6 +63,7 @@ properties:
     oneOf:
       - const: x-powers,axp209-adc
       - const: x-powers,axp221-adc
+      - const: x-powers,axp717-adc
       - const: x-powers,axp813-adc
 
       - items:

Documentation/devicetree/bindings/iio/magnetometer/asahi-kasei,ak8975.yaml

@@ -18,6 +18,10 @@ properties:
           - asahi-kasei,ak09911
           - asahi-kasei,ak09912
           - asahi-kasei,ak09916
+      - items:
+          # ak09918 is register compatible with ak09912.
+          - const: asahi-kasei,ak09918
+          - const: asahi-kasei,ak09912
       - enum:
           - ak8975
           - ak8963

Documentation/devicetree/bindings/iio/proximity/awinic,aw96103.yaml

@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/proximity/awinic,aw96103.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Awinic's AW96103 capacitive proximity sensor and similar
+
+maintainers:
+  - Wang Shuaijie <wangshuaijie@awinic.com>
+
+description: |
+  Awinic's AW96103/AW96105 proximity sensor.
+  The specific absorption rate (SAR) is a metric that measures
+  the degree of absorption of electromagnetic radiation emitted by
+  wireless devices, such as mobile phones and tablets, by human tissue.
+  In mobile phone applications, the proximity sensor is primarily
+  used to detect the proximity of the human body to the phone. When the
+  phone approaches the human body, it will actively reduce the transmit
+  power of the antenna to keep the SAR within a safe range. Therefore,
+  we also refer to the proximity sensor as a SAR sensor.
+
+properties:
+  compatible:
+    enum:
+      - awinic,aw96103
+      - awinic,aw96105
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description:
+      Generated by the device to announce that a close/far
+      proximity event has happened.
+    maxItems: 1
+
+  vcc-supply: true
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - vcc-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        proximity@12 {
+            compatible = "awinic,aw96103";
+            reg = <0x12>;
+            interrupt-parent = <&gpio>;
+            interrupts = <23 IRQ_TYPE_EDGE_FALLING>;
+            vcc-supply = <&pp1800_prox>;
+        };
+    };

Documentation/iio/ad4695.rst

@@ -143,13 +143,18 @@ present, then the external reference voltage is used and the internal buffer is
 disabled. If ``refin-supply`` is present, then the internal buffered reference
 voltage is used.
 
+Gain/offset calibration
+-----------------------
+
+System calibration is supported using the channel gain and offset registers via
+the ``calibscale`` and ``calibbias`` attributes respectively.
+
 Unimplemented features
 ----------------------
 
 - Additional wiring modes
 - Threshold events
 - Oversampling
-- Gain/offset calibration
 - GPIO support
 - CRC support
 

drivers/iio/accel/bmc150-accel-core.c

@@ -10,9 +10,9 @@
 #include <linux/delay.h>
 #include <linux/slab.h>
 #include <linux/acpi.h>
-#include <linux/of_irq.h>
 #include <linux/pm.h>
 #include <linux/pm_runtime.h>
+#include <linux/property.h>
 #include <linux/iio/iio.h>
 #include <linux/iio/sysfs.h>
 #include <linux/iio/buffer.h>
@@ -387,7 +387,7 @@ static bool bmc150_apply_bosc0200_acpi_orientation(struct device *dev,
 						   struct iio_mount_matrix *orientation)
 {
 	struct iio_dev *indio_dev = dev_get_drvdata(dev);
-	struct acpi_device *adev = ACPI_COMPANION(dev);
+	acpi_handle handle = ACPI_HANDLE(dev);
 	char *name, *alt_name, *label;
 
 	if (strcmp(dev_name(dev), "i2c-BOSC0200:base") == 0) {
@@ -398,9 +398,9 @@ static bool bmc150_apply_bosc0200_acpi_orientation(struct device *dev,
 		label = "accel-display";
 	}
 
-	if (acpi_has_method(adev->handle, "ROTM")) {
+	if (acpi_has_method(handle, "ROTM")) {
 		name = "ROTM";
-	} else if (acpi_has_method(adev->handle, alt_name)) {
+	} else if (acpi_has_method(handle, alt_name)) {
 		name = alt_name;
 		indio_dev->label = label;
 	} else {
@@ -514,7 +514,7 @@ static void bmc150_accel_interrupts_setup(struct iio_dev *indio_dev,
 	 */
 	irq_info = bmc150_accel_interrupts_int1;
 	if (data->type == BOSCH_BMC156 ||
-	    irq == of_irq_get_byname(dev->of_node, "INT2"))
+	    irq == fwnode_irq_get_byname(dev_fwnode(dev), "INT2"))
 		irq_info = bmc150_accel_interrupts_int2;
 
 	for (i = 0; i < BMC150_ACCEL_INTERRUPTS; i++)

drivers/iio/adc/Kconfig

@@ -1192,6 +1192,16 @@ config SC27XX_ADC
 	  This driver can also be built as a module. If so, the module
 	  will be called sc27xx_adc.
 
+config SOPHGO_CV1800B_ADC
+	tristate "Sophgo CV1800B SARADC"
+	depends on ARCH_SOPHGO || COMPILE_TEST
+	help
+	  Say yes here to build support for the SARADC integrated inside
+	  the Sophgo CV1800B SoC.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called sophgo_cv1800b_adc.
+
 config SPEAR_ADC
 	tristate "ST SPEAr ADC"
 	depends on PLAT_SPEAR || COMPILE_TEST

drivers/iio/adc/Makefile

@@ -108,6 +108,7 @@ obj-$(CONFIG_ROCKCHIP_SARADC) += rockchip_saradc.o
 obj-$(CONFIG_RZG2L_ADC) += rzg2l_adc.o
 obj-$(CONFIG_SC27XX_ADC) += sc27xx_adc.o
 obj-$(CONFIG_SD_ADC_MODULATOR) += sd_adc_modulator.o
+obj-$(CONFIG_SOPHGO_CV1800B_ADC) += sophgo-cv1800b-adc.o
 obj-$(CONFIG_SPEAR_ADC) += spear_adc.o
 obj-$(CONFIG_STM32_ADC_CORE) += stm32-adc-core.o
 obj-$(CONFIG_STM32_ADC) += stm32-adc.o