Merge branch 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux

Pull i2c fixes from Wolfram Sang:
 "Two more I2C driver bugfixes"

* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: mpc: Use atomic read and fix break condition
  i2c: virtio: fix completion handling

Author: torvalds

drivers/i2c/busses/i2c-mpc.c

@@ -636,7 +636,7 @@ static irqreturn_t mpc_i2c_isr(int irq, void *dev_id)
 	status = readb(i2c->base + MPC_I2C_SR);
 	if (status & CSR_MIF) {
 		/* Wait up to 100us for transfer to properly complete */
-		readb_poll_timeout(i2c->base + MPC_I2C_SR, status, !(status & CSR_MCF), 0, 100);
+		readb_poll_timeout_atomic(i2c->base + MPC_I2C_SR, status, status & CSR_MCF, 0, 100);
 		writeb(0, i2c->base + MPC_I2C_SR);
 		mpc_i2c_do_intr(i2c, status);
 		return IRQ_HANDLED;

drivers/i2c/busses/i2c-virtio.c

@@ -22,34 +22,36 @@
 /**
  * struct virtio_i2c - virtio I2C data
  * @vdev: virtio device for this controller
- * @completion: completion of virtio I2C message
  * @adap: I2C adapter for this controller
  * @vq: the virtio virtqueue for communication
  */
 struct virtio_i2c {
 	struct virtio_device *vdev;
-	struct completion completion;
 	struct i2c_adapter adap;
 	struct virtqueue *vq;
 };
 
 /**
  * struct virtio_i2c_req - the virtio I2C request structure
+ * @completion: completion of virtio I2C message
  * @out_hdr: the OUT header of the virtio I2C message
  * @buf: the buffer into which data is read, or from which it's written
  * @in_hdr: the IN header of the virtio I2C message
  */
 struct virtio_i2c_req {
+	struct completion completion;
 	struct virtio_i2c_out_hdr out_hdr	____cacheline_aligned;
 	uint8_t *buf				____cacheline_aligned;
 	struct virtio_i2c_in_hdr in_hdr		____cacheline_aligned;
 };
 
 static void virtio_i2c_msg_done(struct virtqueue *vq)
 {
-	struct virtio_i2c *vi = vq->vdev->priv;
+	struct virtio_i2c_req *req;
+	unsigned int len;
 
-	complete(&vi->completion);
+	while ((req = virtqueue_get_buf(vq, &len)))
+		complete(&req->completion);
 }
 
 static int virtio_i2c_prepare_reqs(struct virtqueue *vq,
@@ -62,6 +64,8 @@ static int virtio_i2c_prepare_reqs(struct virtqueue *vq,
 	for (i = 0; i < num; i++) {
 		int outcnt = 0, incnt = 0;
 
+		init_completion(&reqs[i].completion);
+
 		/*
 		 * Only 7-bit mode supported for this moment. For the address
 		 * format, Please check the Virtio I2C Specification.
@@ -106,21 +110,15 @@ static int virtio_i2c_complete_reqs(struct virtqueue *vq,
 				    struct virtio_i2c_req *reqs,
 				    struct i2c_msg *msgs, int num)
 {
-	struct virtio_i2c_req *req;
 	bool failed = false;
-	unsigned int len;
 	int i, j = 0;
 
 	for (i = 0; i < num; i++) {
-		/* Detach the ith request from the vq */
-		req = virtqueue_get_buf(vq, &len);
+		struct virtio_i2c_req *req = &reqs[i];
 
-		/*
-		 * Condition req == &reqs[i] should always meet since we have
-		 * total num requests in the vq. reqs[i] can never be NULL here.
-		 */
-		if (!failed && (WARN_ON(req != &reqs[i]) ||
-				req->in_hdr.status != VIRTIO_I2C_MSG_OK))
+		wait_for_completion(&req->completion);
+
+		if (!failed && req->in_hdr.status != VIRTIO_I2C_MSG_OK)
 			failed = true;
 
 		i2c_put_dma_safe_msg_buf(reqs[i].buf, &msgs[i], !failed);
@@ -156,12 +154,8 @@ static int virtio_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs,
 	 * remote here to clear the virtqueue, so we can try another set of
 	 * messages later on.
 	 */
-
-	reinit_completion(&vi->completion);
 	virtqueue_kick(vq);
 
-	wait_for_completion(&vi->completion);
-
 	count = virtio_i2c_complete_reqs(vq, reqs, msgs, count);
 
 err_free:
@@ -210,8 +204,6 @@ static int virtio_i2c_probe(struct virtio_device *vdev)
 	vdev->priv = vi;
 	vi->vdev = vdev;
 
-	init_completion(&vi->completion);
-
 	ret = virtio_i2c_setup_vqs(vi);
 	if (ret)
 		return ret;