Merge branch 'next' into for-linus

Prepare input updates for 6.5 merge window.

Author: dtor

Documentation/devicetree/bindings/input/atmel,maxtouch.yaml

@@ -14,6 +14,9 @@ description: |
   Atmel maXTouch touchscreen or touchpads such as the mXT244
   and similar devices.
 
+allOf:
+  - $ref: input.yaml#
+
 properties:
   compatible:
     const: atmel,maxtouch
@@ -60,6 +63,10 @@ properties:
       or experiment to determine which bit corresponds to which input. Use
       KEY_RESERVED for unused padding values.
 
+  linux,keycodes:
+    minItems: 1
+    maxItems: 8
+
   atmel,wakeup-method:
     $ref: /schemas/types.yaml#/definitions/uint32
     description: |

Documentation/devicetree/bindings/input/cypress,cyapa.txt

@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/cypress,cyapa.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cypress All Points Addressable (APA) I2C Touchpad / Trackpad
+
+maintainers:
+  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+
+properties:
+  compatible:
+    const: cypress,cyapa
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  wakeup-source: true
+
+  vcc-supply:
+    description: 3.3V power
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        trackpad@67 {
+            reg = <0x67>;
+            compatible = "cypress,cyapa";
+            interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
+            interrupt-parent = <&gpx1>;
+            wakeup-source;
+        };
+    };

Documentation/devicetree/bindings/input/cypress,cyapa.yaml

@@ -32,6 +32,8 @@ properties:
     minItems: 1
     maxItems: 2
 
+  enable-gpios: true
+
   vcc-supply: true
 
   direction-duty-cycle-ns:

Documentation/devicetree/bindings/input/pwm-vibrator.yaml

@@ -40,6 +40,8 @@ properties:
   linux,keycodes:
     description: EV_ABS specific event code generated by the axis.
 
+  wakeup-source: true
+
 patternProperties:
   "^button@[0-9]+$":
     type: object

Documentation/devicetree/bindings/input/touchscreen/cypress,tt21000.yaml

@@ -4,16 +4,16 @@ xpad - Linux USB driver for Xbox compatible controllers
 
 This driver exposes all first-party and third-party Xbox compatible
 controllers. It has a long history and has enjoyed considerable usage
-as Window's xinput library caused most PC games to focus on Xbox
+as Windows' xinput library caused most PC games to focus on Xbox
 controller compatibility.
 
 Due to backwards compatibility all buttons are reported as digital.
-This only effects Original Xbox controllers. All later controller models
+This only affects Original Xbox controllers. All later controller models
 have only digital face buttons.
 
 Rumble is supported on some models of Xbox 360 controllers but not of
 Original Xbox controllers nor on Xbox One controllers. As of writing
-the Xbox One's rumble protocol has not been reverse engineered but in
+the Xbox One's rumble protocol has not been reverse-engineered but in
 the future could be supported.
 
 
@@ -82,7 +82,7 @@ I've tested this with Stepmania, and it works quite well.
 Unknown Controllers
 -------------------
 
-If you have an unknown xbox controller, it should work just fine with
+If you have an unknown Xbox controller, it should work just fine with
 the default settings.
 
 HOWEVER if you have an unknown dance pad not listed below, it will not
@@ -123,7 +123,7 @@ can be found on the net ([1]_, [2]_, [3]_).
 
 Thanks to the trip splitter found on the cable you don't even need to cut the
 original one. You can buy an extension cable and cut that instead. That way,
-you can still use the controller with your X-Box, if you have one ;)
+you can still use the controller with your Xbox, if you have one ;)
 
 
 

Documentation/input/devices/xpad.rst

@@ -184,7 +184,7 @@ Gamepads report the following events:
 
   Many pads also have a third button which is branded or has a special symbol
   and meaning. Such buttons are mapped as BTN_MODE. Examples are the Nintendo
-  "HOME" button, the XBox "X"-button or Sony "PS" button.
+  "HOME" button, the Xbox "X" button or the Sony PlayStation "PS" button.
 
 - Rumble:
 

Documentation/input/gamepad.rst

@@ -2575,9 +2575,9 @@ F:	arch/arm/boot/dts/qcom-*.dtsi
 F:	arch/arm/configs/qcom_defconfig
 F:	arch/arm/mach-qcom/
 F:	arch/arm64/boot/dts/qcom/
+F:	drivers/*/*/pm8???-*
 F:	drivers/*/*/qcom*
 F:	drivers/*/*/qcom/
-F:	drivers/*/pm8???-*
 F:	drivers/*/qcom*
 F:	drivers/*/qcom/
 F:	drivers/bluetooth/btqcomsmd.c

MAINTAINERS

@@ -168,7 +168,7 @@ config INPUT_EVBUG
 
 config INPUT_KUNIT_TEST
 	tristate "KUnit tests for Input" if !KUNIT_ALL_TESTS
-	depends on INPUT && KUNIT=y
+	depends on INPUT && KUNIT
 	default KUNIT_ALL_TESTS
 	help
 	  Say Y here if you want to build the KUnit tests for the input

drivers/input/Kconfig

@@ -11,6 +11,7 @@
 
 #include <linux/stddef.h>
 #include <linux/module.h>
+#include <linux/io.h>
 #include <linux/ioport.h>
 #include <linux/init.h>
 #include <linux/gameport.h>
@@ -21,8 +22,6 @@
 #include <linux/mutex.h>
 #include <linux/timekeeping.h>
 
-/*#include <asm/io.h>*/
-
 MODULE_AUTHOR("Vojtech Pavlik <vojtech@ucw.cz>");
 MODULE_DESCRIPTION("Generic gameport layer");
 MODULE_LICENSE("GPL");
@@ -518,6 +517,16 @@ void gameport_set_phys(struct gameport *gameport, const char *fmt, ...)
 }
 EXPORT_SYMBOL(gameport_set_phys);
 
+static void gameport_default_trigger(struct gameport *gameport)
+{
+	outb(0xff, gameport->io);
+}
+
+static unsigned char gameport_default_read(struct gameport *gameport)
+{
+	return inb(gameport->io);
+}
+
 /*
  * Prepare gameport port for registration.
  */
@@ -536,6 +545,11 @@ static void gameport_init_port(struct gameport *gameport)
 	if (gameport->parent)
 		gameport->dev.parent = &gameport->parent->dev;
 
+	if (!gameport->trigger)
+		gameport->trigger = gameport_default_trigger;
+	if (!gameport->read)
+		gameport->read = gameport_default_read;
+
 	INIT_LIST_HEAD(&gameport->node);
 	spin_lock_init(&gameport->timer_lock);
 	timer_setup(&gameport->poll_timer, gameport_run_poll_handler, 0);