Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull SCSI fixes from James Bottomley:
 "Six small and reasonably obvious fixes, all in drivers"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: pm80xx: Set stopped phy's linkrate to Disabled
  scsi: pm80xx: Fix 'Unknown' max/min linkrate
  scsi: ufs: core: Fix missing clk change notification on host reset
  scsi: ufs: core: Drop loglevel of WriteBoost message
  scsi: megaraid: Clear READ queue map's nr_queues
  scsi: target: Fix WRITE_SAME No Data Buffer crash

Author: torvalds

drivers/scsi/megaraid/megaraid_sas_base.c

@@ -3195,6 +3195,9 @@ static int megasas_map_queues(struct Scsi_Host *shost)
 	qoff += map->nr_queues;
 	offset += map->nr_queues;
 
+	/* we never use READ queue, so can't cheat blk-mq */
+	shost->tag_set.map[HCTX_TYPE_READ].nr_queues = 0;
+
 	/* Setup Poll hctx */
 	map = &shost->tag_set.map[HCTX_TYPE_POLL];
 	map->nr_queues = instance->iopoll_q_count;

drivers/scsi/pm8001/pm8001_hwi.c

@@ -3145,15 +3145,6 @@ void pm8001_bytes_dmaed(struct pm8001_hba_info *pm8001_ha, int i)
 	if (!phy->phy_attached)
 		return;
 
-	if (sas_phy->phy) {
-		struct sas_phy *sphy = sas_phy->phy;
-		sphy->negotiated_linkrate = sas_phy->linkrate;
-		sphy->minimum_linkrate = phy->minimum_linkrate;
-		sphy->minimum_linkrate_hw = SAS_LINK_RATE_1_5_GBPS;
-		sphy->maximum_linkrate = phy->maximum_linkrate;
-		sphy->maximum_linkrate_hw = phy->maximum_linkrate;
-	}
-
 	if (phy->phy_type & PORT_TYPE_SAS) {
 		struct sas_identify_frame *id;
 		id = (struct sas_identify_frame *)phy->frame_rcvd;
@@ -3177,26 +3168,22 @@ void pm8001_get_lrate_mode(struct pm8001_phy *phy, u8 link_rate)
 	switch (link_rate) {
 	case PHY_SPEED_120:
 		phy->sas_phy.linkrate = SAS_LINK_RATE_12_0_GBPS;
-		phy->sas_phy.phy->negotiated_linkrate = SAS_LINK_RATE_12_0_GBPS;
 		break;
 	case PHY_SPEED_60:
 		phy->sas_phy.linkrate = SAS_LINK_RATE_6_0_GBPS;
-		phy->sas_phy.phy->negotiated_linkrate = SAS_LINK_RATE_6_0_GBPS;
 		break;
 	case PHY_SPEED_30:
 		phy->sas_phy.linkrate = SAS_LINK_RATE_3_0_GBPS;
-		phy->sas_phy.phy->negotiated_linkrate = SAS_LINK_RATE_3_0_GBPS;
 		break;
 	case PHY_SPEED_15:
 		phy->sas_phy.linkrate = SAS_LINK_RATE_1_5_GBPS;
-		phy->sas_phy.phy->negotiated_linkrate = SAS_LINK_RATE_1_5_GBPS;
 		break;
 	}
 	sas_phy->negotiated_linkrate = phy->sas_phy.linkrate;
-	sas_phy->maximum_linkrate_hw = SAS_LINK_RATE_6_0_GBPS;
+	sas_phy->maximum_linkrate_hw = phy->maximum_linkrate;
 	sas_phy->minimum_linkrate_hw = SAS_LINK_RATE_1_5_GBPS;
-	sas_phy->maximum_linkrate = SAS_LINK_RATE_6_0_GBPS;
-	sas_phy->minimum_linkrate = SAS_LINK_RATE_1_5_GBPS;
+	sas_phy->maximum_linkrate = phy->maximum_linkrate;
+	sas_phy->minimum_linkrate = phy->minimum_linkrate;
 }
 
 /**

drivers/scsi/pm8001/pm8001_init.c

@@ -143,6 +143,8 @@ static void pm8001_phy_init(struct pm8001_hba_info *pm8001_ha, int phy_id)
 	struct asd_sas_phy *sas_phy = &phy->sas_phy;
 	phy->phy_state = PHY_LINK_DISABLE;
 	phy->pm8001_ha = pm8001_ha;
+	phy->minimum_linkrate = SAS_LINK_RATE_1_5_GBPS;
+	phy->maximum_linkrate = SAS_LINK_RATE_6_0_GBPS;
 	sas_phy->enabled = (phy_id < pm8001_ha->chip->n_phy) ? 1 : 0;
 	sas_phy->class = SAS;
 	sas_phy->iproto = SAS_PROTOCOL_ALL;

drivers/scsi/pm8001/pm80xx_hwi.c

@@ -3723,8 +3723,12 @@ static int mpi_phy_stop_resp(struct pm8001_hba_info *pm8001_ha, void *piomb)
 	pm8001_dbg(pm8001_ha, MSG, "phy:0x%x status:0x%x\n",
 		   phyid, status);
 	if (status == PHY_STOP_SUCCESS ||
-		status == PHY_STOP_ERR_DEVICE_ATTACHED)
+		status == PHY_STOP_ERR_DEVICE_ATTACHED) {
 		phy->phy_state = PHY_LINK_DISABLE;
+		phy->sas_phy.phy->negotiated_linkrate = SAS_PHY_DISABLED;
+		phy->sas_phy.linkrate = SAS_PHY_DISABLED;
+	}
+
 	return 0;
 }
 

drivers/target/target_core_file.c

@@ -448,6 +448,9 @@ fd_execute_write_same(struct se_cmd *cmd)
 		return TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE;
 	}
 
+	if (!cmd->t_data_nents)
+		return TCM_INVALID_CDB_FIELD;
+
 	if (cmd->t_data_nents > 1 ||
 	    cmd->t_data_sg[0].length != cmd->se_dev->dev_attrib.block_size) {
 		pr_err("WRITE_SAME: Illegal SGL t_data_nents: %u length: %u"

drivers/target/target_core_iblock.c

@@ -494,6 +494,10 @@ iblock_execute_write_same(struct se_cmd *cmd)
 		       " backends not supported\n");
 		return TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE;
 	}
+
+	if (!cmd->t_data_nents)
+		return TCM_INVALID_CDB_FIELD;
+
 	sg = &cmd->t_data_sg[0];
 
 	if (cmd->t_data_nents > 1 ||

drivers/target/target_core_sbc.c

@@ -312,6 +312,12 @@ sbc_setup_write_same(struct se_cmd *cmd, unsigned char flags, struct sbc_ops *op
 		pr_warn("WRITE SAME with ANCHOR not supported\n");
 		return TCM_INVALID_CDB_FIELD;
 	}
+
+	if (flags & 0x01) {
+		pr_warn("WRITE SAME with NDOB not supported\n");
+		return TCM_INVALID_CDB_FIELD;
+	}
+
 	/*
 	 * Special case for WRITE_SAME w/ UNMAP=1 that ends up getting
 	 * translated into block discard requests within backend code.

drivers/ufs/core/ufshcd.c

@@ -5738,7 +5738,7 @@ int ufshcd_wb_toggle(struct ufs_hba *hba, bool enable)
 	}
 
 	hba->dev_info.wb_enabled = enable;
-	dev_info(hba->dev, "%s Write Booster %s\n",
+	dev_dbg(hba->dev, "%s Write Booster %s\n",
 			__func__, enable ? "enabled" : "disabled");
 
 	return ret;
@@ -7253,7 +7253,7 @@ static int ufshcd_host_reset_and_restore(struct ufs_hba *hba)
 	hba->silence_err_logs = false;
 
 	/* scale up clocks to max frequency before full reinitialization */
-	ufshcd_set_clk_freq(hba, true);
+	ufshcd_scale_clks(hba, true);
 
 	err = ufshcd_hba_enable(hba);