Merge tag 'soc-fixes-6.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

torvalds · torvalds · commit c69cf88cda5f · 2022-09-22T11:10:11.000-07:00
Pull ARM SoC fixes from Arnd Bergmann:
 "Another set of fixes for fixes for the soc tree:

   - A fix for the interrupt number on at91/lan966 ethernet PHYs

   - A second round of fixes for NXP i.MX series, including a couple of
     build issues, and board specific DT corrections on TQMa8MPQL,
     imx8mp-venice-gw74xx and imx8mm-verdin for reliability and
     partially broken functionality

   - Several fixes for Rockchip SoCs, addressing a USB issue on
     BPI-R2-Pro, wakeup on Gru-Bob and reliability of high-speed SD
     cards, among other minor issues

   - A fix for a long-running naming mistake that prevented the moxart
     mmc driver from working at all

   - Multiple Arm SCMI firmware fixes for hardening some corner cases"

* tag 'soc-fixes-6.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (30 commits)
  arm64: dts: imx8mp-venice-gw74xx: fix port/phy validation
  ARM: dts: lan966x: Fix the interrupt number for internal PHYs
  arm64: dts: imx8mp-venice-gw74xx: fix ksz9477 cpu port
  arm64: dts: imx8mp-venice-gw74xx: fix CAN STBY polarity
  dt-bindings: memory-controllers: fsl,imx8m-ddrc: drop Leonard Crestez
  arm64: dts: tqma8mqml: Include phy-imx8-pcie.h header
  arm64: defconfig: enable ARCH_NXP
  arm64: dts: imx8mp-tqma8mpql-mba8mpxl: add missing pinctrl for RTC alarm
  ARM: dts: fix Moxa SDIO 'compatible', remove 'sdhci' misnomer
  arm64: dts: imx8mm-verdin: extend pmic voltages
  arm64: dts: rockchip: Remove 'enable-active-low' from rk3566-quartz64-a
  arm64: dts: rockchip: Remove 'enable-active-low' from rk3399-puma
  arm64: dts: rockchip: fix property for usb2 phy supply on rk3568-evb1-v10
  arm64: dts: rockchip: fix property for usb2 phy supply on rock-3a
  arm64: dts: imx8ulp: add #reset-cells for pcc
  arm64: dts: tqma8mpxl-ba8mpxl: Fix button GPIOs
  arm64: dts: imx8mn: remove GPU power domain reset
  arm64: dts: rockchip: Set RK3399-Gru PCLK_EDP to 24 MHz
  arm64: dts: imx8mm: Reverse CPLD_Dn GPIO label mapping on MX8Menlo
  arm64: dts: rockchip: fix upper usb port on BPI-R2-Pro
  ...
diff --git a/Documentation/devicetree/bindings/dma/moxa,moxart-dma.txt b/Documentation/devicetree/bindings/dma/moxa,moxart-dma.txt
@@ -34,8 +34,8 @@ Example:
 Use specific request line passing from dma
 For example, MMC request line is 5
 
-	sdhci: sdhci@98e00000 {
-		compatible = "moxa,moxart-sdhci";
+	mmc: mmc@98e00000 {
+		compatible = "moxa,moxart-mmc";
 		reg = <0x98e00000 0x5C>;
 		interrupts = <5 0>;
 		clocks = <&clk_apb>;
diff --git a/Documentation/devicetree/bindings/memory-controllers/fsl/imx8m-ddrc.yaml b/Documentation/devicetree/bindings/memory-controllers/fsl/imx8m-ddrc.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: i.MX8M DDR Controller
 
 maintainers:
-  - Leonard Crestez <leonard.crestez@nxp.com>
+  - Peng Fan <peng.fan@nxp.com>
 
 description:
   The DDRC block is integrated in i.MX8M for interfacing with DDR based
diff --git a/arch/arm/boot/dts/lan966x.dtsi b/arch/arm/boot/dts/lan966x.dtsi
@@ -541,13 +541,13 @@
 
 			phy0: ethernet-phy@1 {
 				reg = <1>;
-				interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
 				status = "disabled";
 			};
 
 			phy1: ethernet-phy@2 {
 				reg = <2>;
-				interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
 				status = "disabled";
 			};
 		};
diff --git a/arch/arm/boot/dts/moxart-uc7112lx.dts b/arch/arm/boot/dts/moxart-uc7112lx.dts
@@ -79,7 +79,7 @@
 	clocks = <&ref12>;
 };
 
-&sdhci {
+&mmc {
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/moxart.dtsi b/arch/arm/boot/dts/moxart.dtsi
@@ -93,8 +93,8 @@
 			clock-names = "PCLK";
 		};
 
-		sdhci: sdhci@98e00000 {
-			compatible = "moxa,moxart-sdhci";
+		mmc: mmc@98e00000 {
+			compatible = "moxa,moxart-mmc";
 			reg = <0x98e00000 0x5C>;
 			interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clk_apb>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-mx8menlo.dts b/arch/arm64/boot/dts/freescale/imx8mm-mx8menlo.dts
@@ -152,11 +152,11 @@
 	 * CPLD_reset is RESET_SOFT in schematic
 	 */
 	gpio-line-names =
-		"CPLD_D[1]", "CPLD_int", "CPLD_reset", "",
-		"", "CPLD_D[0]", "", "",
-		"", "", "", "CPLD_D[2]",
-		"CPLD_D[3]", "CPLD_D[4]", "CPLD_D[5]", "CPLD_D[6]",
-		"CPLD_D[7]", "", "", "",
+		"CPLD_D[6]", "CPLD_int", "CPLD_reset", "",
+		"", "CPLD_D[7]", "", "",
+		"", "", "", "CPLD_D[5]",
+		"CPLD_D[4]", "CPLD_D[3]", "CPLD_D[2]", "CPLD_D[1]",
+		"CPLD_D[0]", "", "", "",
 		"", "", "", "",
 		"", "", "", "KBD_intK",
 		"", "", "", "";
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml-mba8mx.dts b/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml-mba8mx.dts
@@ -5,7 +5,6 @@
 
 /dts-v1/;
 
-#include <dt-bindings/phy/phy-imx8-pcie.h>
 #include "imx8mm-tqma8mqml.dtsi"
 #include "mba8mx.dtsi"
 
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml.dtsi
@@ -3,6 +3,7 @@
  * Copyright 2020-2021 TQ-Systems GmbH
  */
 
+#include <dt-bindings/phy/phy-imx8-pcie.h>
 #include "imx8mm.dtsi"
 
 / {
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi
@@ -367,17 +367,17 @@
 				nxp,dvs-standby-voltage = <850000>;
 				regulator-always-on;
 				regulator-boot-on;
-				regulator-max-microvolt = <950000>;
-				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1050000>;
+				regulator-min-microvolt = <805000>;
 				regulator-name = "On-module +VDD_ARM (BUCK2)";
 				regulator-ramp-delay = <3125>;
 			};
 
 			reg_vdd_dram: BUCK3 {
 				regulator-always-on;
 				regulator-boot-on;
-				regulator-max-microvolt = <950000>;
-				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-min-microvolt = <805000>;
 				regulator-name = "On-module +VDD_GPU_VPU_DDR (BUCK3)";
 			};
 
@@ -416,7 +416,7 @@
 			reg_vdd_snvs: LDO2 {
 				regulator-always-on;
 				regulator-boot-on;
-				regulator-max-microvolt = <900000>;
+				regulator-max-microvolt = <800000>;
 				regulator-min-microvolt = <800000>;
 				regulator-name = "On-module +V0.8_SNVS (LDO2)";
 			};
diff --git a/arch/arm64/boot/dts/freescale/imx8mn.dtsi b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
@@ -672,7 +672,6 @@
 							 <&clk IMX8MN_CLK_GPU_SHADER>,
 							 <&clk IMX8MN_CLK_GPU_BUS_ROOT>,
 							 <&clk IMX8MN_CLK_GPU_AHB>;
-						resets = <&src IMX8MQ_RESET_GPU_RESET>;
 					};
 
 					pgc_dispmix: power-domain@3 {
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts
@@ -57,13 +57,13 @@
 		switch-1 {
 			label = "S12";
 			linux,code = <BTN_0>;
-			gpios = <&gpio5 26 GPIO_ACTIVE_LOW>;
+			gpios = <&gpio5 27 GPIO_ACTIVE_LOW>;
 		};
 
 		switch-2 {
 			label = "S13";
 			linux,code = <BTN_1>;
-			gpios = <&gpio5 27 GPIO_ACTIVE_LOW>;
+			gpios = <&gpio5 26 GPIO_ACTIVE_LOW>;
 		};
 	};
 
@@ -394,6 +394,8 @@
 
 &pcf85063 {
 	/* RTC_EVENT# is connected on MBa8MPxL */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcf85063>;
 	interrupt-parent = <&gpio4>;
 	interrupts = <28 IRQ_TYPE_EDGE_FALLING>;
 };
@@ -630,6 +632,10 @@
 		fsl,pins = <MX8MP_IOMUXC_SAI5_RXC__GPIO3_IO20		0x10>; /* Power enable */
 	};
 
+	pinctrl_pcf85063: pcf85063grp {
+		fsl,pins = <MX8MP_IOMUXC_SAI3_RXFS__GPIO4_IO28		0x80>;
+	};
+
 	/* LVDS Backlight */
 	pinctrl_pwm2: pwm2grp {
 		fsl,pins = <MX8MP_IOMUXC_SAI5_RXD0__PWM2_OUT		0x14>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts
@@ -123,8 +123,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_reg_can>;
 		regulator-name = "can2_stby";
-		gpio = <&gpio3 19 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
+		gpio = <&gpio3 19 GPIO_ACTIVE_LOW>;
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 	};
@@ -484,35 +483,40 @@
 			lan1: port@0 {
 				reg = <0>;
 				label = "lan1";
+				phy-mode = "internal";
 				local-mac-address = [00 00 00 00 00 00];
 			};
 
 			lan2: port@1 {
 				reg = <1>;
 				label = "lan2";
+				phy-mode = "internal";
 				local-mac-address = [00 00 00 00 00 00];
 			};
 
 			lan3: port@2 {
 				reg = <2>;
 				label = "lan3";
+				phy-mode = "internal";
 				local-mac-address = [00 00 00 00 00 00];
 			};
 
 			lan4: port@3 {
 				reg = <3>;
 				label = "lan4";
+				phy-mode = "internal";
 				local-mac-address = [00 00 00 00 00 00];
 			};
 
 			lan5: port@4 {
 				reg = <4>;
 				label = "lan5";
+				phy-mode = "internal";
 				local-mac-address = [00 00 00 00 00 00];
 			};
 
-			port@6 {
-				reg = <6>;
+			port@5 {
+				reg = <5>;
 				label = "cpu";
 				ethernet = <&fec>;
 				phy-mode = "rgmii-id";
diff --git a/arch/arm64/boot/dts/freescale/imx8ulp.dtsi b/arch/arm64/boot/dts/freescale/imx8ulp.dtsi
@@ -172,6 +172,7 @@
 				compatible = "fsl,imx8ulp-pcc3";
 				reg = <0x292d0000 0x10000>;
 				#clock-cells = <1>;
+				#reset-cells = <1>;
 			};
 
 			tpm5: tpm@29340000 {
@@ -270,6 +271,7 @@
 				compatible = "fsl,imx8ulp-pcc4";
 				reg = <0x29800000 0x10000>;
 				#clock-cells = <1>;
+				#reset-cells = <1>;
 			};
 
 			lpi2c6: i2c@29840000 {
@@ -414,6 +416,7 @@
 				compatible = "fsl,imx8ulp-pcc5";
 				reg = <0x2da70000 0x10000>;
 				#clock-cells = <1>;
+				#reset-cells = <1>;
 			};
 		};
 
diff --git a/arch/arm64/boot/dts/rockchip/px30-engicam-px30-core.dtsi b/arch/arm64/boot/dts/rockchip/px30-engicam-px30-core.dtsi
@@ -2,8 +2,8 @@
 /*
  * Copyright (c) 2020 Fuzhou Rockchip Electronics Co., Ltd
  * Copyright (c) 2020 Engicam srl
- * Copyright (c) 2020 Amarula Solutons
- * Copyright (c) 2020 Amarula Solutons(India)
+ * Copyright (c) 2020 Amarula Solutions
+ * Copyright (c) 2020 Amarula Solutions(India)
  */
 
 #include <dt-bindings/gpio/gpio.h>
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-bob.dts b/arch/arm64/boot/dts/rockchip/rk3399-gru-bob.dts
@@ -88,3 +88,8 @@
 		};
 	};
 };
+
+&wlan_host_wake_l {
+	/* Kevin has an external pull up, but Bob does not. */
+	rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>;
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi
@@ -244,6 +244,14 @@
 &edp {
 	status = "okay";
 
+	/*
+	 * eDP PHY/clk don't sync reliably at anything other than 24 MHz. Only
+	 * set this here, because rk3399-gru.dtsi ensures we can generate this
+	 * off GPLL=600MHz, whereas some other RK3399 boards may not.
+	 */
+	assigned-clocks = <&cru PCLK_EDP>;
+	assigned-clock-rates = <24000000>;
+
 	ports {
 		edp_out: port@1 {
 			reg = <1>;
@@ -578,6 +586,7 @@ ap_i2c_tp: &i2c5 {
 	};
 
 	wlan_host_wake_l: wlan-host-wake-l {
+		/* Kevin has an external pull up, but Bob does not */
 		rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
 	};
 };
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi
@@ -62,7 +62,6 @@
 	vcc5v0_host: vcc5v0-host-regulator {
 		compatible = "regulator-fixed";
 		gpio = <&gpio4 RK_PA3 GPIO_ACTIVE_LOW>;
-		enable-active-low;
 		pinctrl-names = "default";
 		pinctrl-0 = <&vcc5v0_host_en>;
 		regulator-name = "vcc5v0_host";
diff --git a/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts b/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts
@@ -189,7 +189,6 @@
 
 	vcc3v3_sd: vcc3v3_sd {
 		compatible = "regulator-fixed";
-		enable-active-low;
 		gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&vcc_sd_h>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3566-quartz64-b.dts b/arch/arm64/boot/dts/rockchip/rk3566-quartz64-b.dts
@@ -506,7 +506,7 @@
 	disable-wp;
 	pinctrl-names = "default";
 	pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
-	sd-uhs-sdr104;
+	sd-uhs-sdr50;
 	vmmc-supply = <&vcc3v3_sd>;
 	vqmmc-supply = <&vccio_sd>;
 	status = "okay";
diff --git a/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts b/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts
@@ -678,7 +678,7 @@
 };
 
 &usb_host0_xhci {
-	extcon = <&usb2phy0>;
+	dr_mode = "host";
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dts b/arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dts
@@ -656,7 +656,7 @@
 };
 
 &usb2phy0_otg {
-	vbus-supply = <&vcc5v0_usb_otg>;
+	phy-supply = <&vcc5v0_usb_otg>;
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts b/arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts
@@ -581,7 +581,7 @@
 };
 
 &usb2phy0_otg {
-	vbus-supply = <&vcc5v0_usb_otg>;
+	phy-supply = <&vcc5v0_usb_otg>;
 	status = "okay";
 };
 
diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
@@ -48,6 +48,7 @@ CONFIG_ARCH_KEEMBAY=y
 CONFIG_ARCH_MEDIATEK=y
 CONFIG_ARCH_MESON=y
 CONFIG_ARCH_MVEBU=y
+CONFIG_ARCH_NXP=y
 CONFIG_ARCH_MXC=y
 CONFIG_ARCH_NPCM=y
 CONFIG_ARCH_QCOM=y
diff --git a/drivers/firmware/arm_scmi/clock.c b/drivers/firmware/arm_scmi/clock.c
@@ -450,9 +450,13 @@ static int scmi_clock_count_get(const struct scmi_protocol_handle *ph)
 static const struct scmi_clock_info *
 scmi_clock_info_get(const struct scmi_protocol_handle *ph, u32 clk_id)
 {
+	struct scmi_clock_info *clk;
 	struct clock_info *ci = ph->get_priv(ph);
-	struct scmi_clock_info *clk = ci->clk + clk_id;
 
+	if (clk_id >= ci->num_clocks)
+		return NULL;
+
+	clk = ci->clk + clk_id;
 	if (!clk->name[0])
 		return NULL;
 
diff --git a/drivers/firmware/arm_scmi/optee.c b/drivers/firmware/arm_scmi/optee.c
@@ -106,6 +106,7 @@ enum scmi_optee_pta_cmd {
  * @channel_id: OP-TEE channel ID used for this transport
  * @tee_session: TEE session identifier
  * @caps: OP-TEE SCMI channel capabilities
+ * @rx_len: Response size
  * @mu: Mutex protection on channel access
  * @cinfo: SCMI channel information
  * @shmem: Virtual base address of the shared memory
diff --git a/drivers/firmware/arm_scmi/reset.c b/drivers/firmware/arm_scmi/reset.c
@@ -166,9 +166,13 @@ static int scmi_domain_reset(const struct scmi_protocol_handle *ph, u32 domain,
 	struct scmi_xfer *t;
 	struct scmi_msg_reset_domain_reset *dom;
 	struct scmi_reset_info *pi = ph->get_priv(ph);
-	struct reset_dom_info *rdom = pi->dom_info + domain;
+	struct reset_dom_info *rdom;
 
-	if (rdom->async_reset)
+	if (domain >= pi->num_domains)
+		return -EINVAL;
+
+	rdom = pi->dom_info + domain;
+	if (rdom->async_reset && flags & AUTONOMOUS_RESET)
 		flags |= ASYNCHRONOUS_RESET;
 
 	ret = ph->xops->xfer_get_init(ph, RESET, sizeof(*dom), 0, &t);
@@ -180,7 +184,7 @@ static int scmi_domain_reset(const struct scmi_protocol_handle *ph, u32 domain,
 	dom->flags = cpu_to_le32(flags);
 	dom->reset_state = cpu_to_le32(state);
 
-	if (rdom->async_reset)
+	if (flags & ASYNCHRONOUS_RESET)
 		ret = ph->xops->do_xfer_with_response(ph, t);
 	else
 		ret = ph->xops->do_xfer(ph, t);
diff --git a/drivers/firmware/arm_scmi/scmi_pm_domain.c b/drivers/firmware/arm_scmi/scmi_pm_domain.c
diff --git a/drivers/firmware/arm_scmi/sensors.c b/drivers/firmware/arm_scmi/sensors.c
diff --git a/include/linux/scmi_protocol.h b/include/linux/scmi_protocol.h
diff --git a/include/trace/events/scmi.h b/include/trace/events/scmi.h
