x86/entry/64: Convert SYSRET validation tests to C

No change in functionality expected.

Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Uros Bizjak <ubizjak@gmail.com>
Link: https://lore.kernel.org/r/20231011224351.130935-2-brgerst@gmail.com

Author: Brian Gerst

arch/x86/entry/common.c

@@ -71,7 +71,8 @@ static __always_inline bool do_syscall_x32(struct pt_regs *regs, int nr)
 	return false;
 }
 
-__visible noinstr void do_syscall_64(struct pt_regs *regs, int nr)
+/* Returns true to return using SYSRET, or false to use IRET */
+__visible noinstr bool do_syscall_64(struct pt_regs *regs, int nr)
 {
 	add_random_kstack_offset();
 	nr = syscall_enter_from_user_mode(regs, nr);
@@ -85,6 +86,46 @@ __visible noinstr void do_syscall_64(struct pt_regs *regs, int nr)
 
 	instrumentation_end();
 	syscall_exit_to_user_mode(regs);
+
+	/*
+	 * Check that the register state is valid for using SYSRET to exit
+	 * to userspace.  Otherwise use the slower but fully capable IRET
+	 * exit path.
+	 */
+
+	/* XEN PV guests always use the IRET path */
+	if (cpu_feature_enabled(X86_FEATURE_XENPV))
+		return false;
+
+	/* SYSRET requires RCX == RIP and R11 == EFLAGS */
+	if (unlikely(regs->cx != regs->ip || regs->r11 != regs->flags))
+		return false;
+
+	/* CS and SS must match the values set in MSR_STAR */
+	if (unlikely(regs->cs != __USER_CS || regs->ss != __USER_DS))
+		return false;
+
+	/*
+	 * On Intel CPUs, SYSRET with non-canonical RCX/RIP will #GP
+	 * in kernel space.  This essentially lets the user take over
+	 * the kernel, since userspace controls RSP.
+	 *
+	 * Change top bits to match the most significant bit (47th or 56th bit
+	 * depending on paging mode) in the address.
+	 */
+	if (unlikely(!__is_canonical_address(regs->ip, __VIRTUAL_MASK_SHIFT + 1)))
+		return false;
+
+	/*
+	 * SYSRET cannot restore RF.  It can restore TF, but unlike IRET,
+	 * restoring TF results in a trap from userspace immediately after
+	 * SYSRET.
+	 */
+	if (unlikely(regs->flags & (X86_EFLAGS_RF | X86_EFLAGS_TF)))
+		return false;
+
+	/* Use SYSRET to exit to userspace */
+	return true;
 }
 #endif
 

arch/x86/entry/entry_64.S

@@ -126,57 +126,8 @@ SYM_INNER_LABEL(entry_SYSCALL_64_after_hwframe, SYM_L_GLOBAL)
 	 * In the Xen PV case we must use iret anyway.
 	 */
 
-	ALTERNATIVE "", "jmp	swapgs_restore_regs_and_return_to_usermode", \
-		X86_FEATURE_XENPV
-
-	movq	RCX(%rsp), %rcx
-	movq	RIP(%rsp), %r11
-
-	cmpq	%rcx, %r11	/* SYSRET requires RCX == RIP */
-	jne	swapgs_restore_regs_and_return_to_usermode
-
-	/*
-	 * On Intel CPUs, SYSRET with non-canonical RCX/RIP will #GP
-	 * in kernel space.  This essentially lets the user take over
-	 * the kernel, since userspace controls RSP.
-	 *
-	 * If width of "canonical tail" ever becomes variable, this will need
-	 * to be updated to remain correct on both old and new CPUs.
-	 *
-	 * Change top bits to match most significant bit (47th or 56th bit
-	 * depending on paging mode) in the address.
-	 */
-#ifdef CONFIG_X86_5LEVEL
-	ALTERNATIVE "shl $(64 - 48), %rcx; sar $(64 - 48), %rcx", \
-		"shl $(64 - 57), %rcx; sar $(64 - 57), %rcx", X86_FEATURE_LA57
-#else
-	shl	$(64 - (__VIRTUAL_MASK_SHIFT+1)), %rcx
-	sar	$(64 - (__VIRTUAL_MASK_SHIFT+1)), %rcx
-#endif
-
-	/* If this changed %rcx, it was not canonical */
-	cmpq	%rcx, %r11
-	jne	swapgs_restore_regs_and_return_to_usermode
-
-	cmpq	$__USER_CS, CS(%rsp)		/* CS must match SYSRET */
-	jne	swapgs_restore_regs_and_return_to_usermode
-
-	movq	R11(%rsp), %r11
-	cmpq	%r11, EFLAGS(%rsp)		/* R11 == RFLAGS */
-	jne	swapgs_restore_regs_and_return_to_usermode
-
-	/*
-	 * SYSRET cannot restore RF.  It can restore TF, but unlike IRET,
-	 * restoring TF results in a trap from userspace immediately after
-	 * SYSRET.
-	 */
-	testq	$(X86_EFLAGS_RF|X86_EFLAGS_TF), %r11
-	jnz	swapgs_restore_regs_and_return_to_usermode
-
-	/* nothing to check for RSP */
-
-	cmpq	$__USER_DS, SS(%rsp)		/* SS must match SYSRET */
-	jne	swapgs_restore_regs_and_return_to_usermode
+	ALTERNATIVE "testb %al, %al; jz swapgs_restore_regs_and_return_to_usermode", \
+		"jmp swapgs_restore_regs_and_return_to_usermode", X86_FEATURE_XENPV
 
 	/*
 	 * We win! This label is here just for ease of understanding

arch/x86/include/asm/syscall.h

@@ -126,7 +126,7 @@ static inline int syscall_get_arch(struct task_struct *task)
 		? AUDIT_ARCH_I386 : AUDIT_ARCH_X86_64;
 }
 
-void do_syscall_64(struct pt_regs *regs, int nr);
+bool do_syscall_64(struct pt_regs *regs, int nr);
 
 #endif	/* CONFIG_X86_32 */