Merge tag 'ata-6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata

Pull ata fixes from Damien Le Moal:

 - Fix link power management transitions to disallow unsupported states
   (Niklas)

 - A small string handling fix for the sata_mv driver (Christophe)

 - Clear port pending interrupts before reset, as per AHCI
   specifications (Szuying).

   Followup fixes for this one are to not clear ATA_PFLAG_EH_PENDING in
   ata_eh_reset() to allow EH to continue on with other actions recorded
   with error interrupts triggered before EH completes. And an
   additional fix to avoid thawing a port twice in EH (Niklas)

 - Small code style fixes in the pata_parport driver to silence the
   build bot as it keeps complaining about bad indentation (me)

 - A fix for the recent CDL code to avoid fetching sense data for
   successful commands when not necessary for correct operation (Niklas)

* tag 'ata-6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
  ata: libata-core: fetch sense data for successful commands iff CDL enabled
  ata: libata-eh: do not thaw the port twice in ata_eh_reset()
  ata: libata-eh: do not clear ATA_PFLAG_EH_PENDING in ata_eh_reset()
  ata: pata_parport: Fix code style issues
  ata: libahci: clear pending interrupt status
  ata: sata_mv: Fix incorrect string length computation in mv_dump_mem()
  ata: libata: disallow dev-initiated LPM transitions to unsupported states

Author: torvalds

drivers/ata/ahci.c

@@ -1883,6 +1883,15 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 	else
 		dev_info(&pdev->dev, "SSS flag set, parallel bus scan disabled\n");
 
+	if (!(hpriv->cap & HOST_CAP_PART))
+		host->flags |= ATA_HOST_NO_PART;
+
+	if (!(hpriv->cap & HOST_CAP_SSC))
+		host->flags |= ATA_HOST_NO_SSC;
+
+	if (!(hpriv->cap2 & HOST_CAP2_SDS))
+		host->flags |= ATA_HOST_NO_DEVSLP;
+
 	if (pi.flags & ATA_FLAG_EM)
 		ahci_reset_em(host);
 

drivers/ata/libahci.c

@@ -1256,6 +1256,26 @@ static ssize_t ahci_activity_show(struct ata_device *dev, char *buf)
 	return sprintf(buf, "%d\n", emp->blink_policy);
 }
 
+static void ahci_port_clear_pending_irq(struct ata_port *ap)
+{
+	struct ahci_host_priv *hpriv = ap->host->private_data;
+	void __iomem *port_mmio = ahci_port_base(ap);
+	u32 tmp;
+
+	/* clear SError */
+	tmp = readl(port_mmio + PORT_SCR_ERR);
+	dev_dbg(ap->host->dev, "PORT_SCR_ERR 0x%x\n", tmp);
+	writel(tmp, port_mmio + PORT_SCR_ERR);
+
+	/* clear port IRQ */
+	tmp = readl(port_mmio + PORT_IRQ_STAT);
+	dev_dbg(ap->host->dev, "PORT_IRQ_STAT 0x%x\n", tmp);
+	if (tmp)
+		writel(tmp, port_mmio + PORT_IRQ_STAT);
+
+	writel(1 << ap->port_no, hpriv->mmio + HOST_IRQ_STAT);
+}
+
 static void ahci_port_init(struct device *dev, struct ata_port *ap,
 			   int port_no, void __iomem *mmio,
 			   void __iomem *port_mmio)
@@ -1270,18 +1290,7 @@ static void ahci_port_init(struct device *dev, struct ata_port *ap,
 	if (rc)
 		dev_warn(dev, "%s (%d)\n", emsg, rc);
 
-	/* clear SError */
-	tmp = readl(port_mmio + PORT_SCR_ERR);
-	dev_dbg(dev, "PORT_SCR_ERR 0x%x\n", tmp);
-	writel(tmp, port_mmio + PORT_SCR_ERR);
-
-	/* clear port IRQ */
-	tmp = readl(port_mmio + PORT_IRQ_STAT);
-	dev_dbg(dev, "PORT_IRQ_STAT 0x%x\n", tmp);
-	if (tmp)
-		writel(tmp, port_mmio + PORT_IRQ_STAT);
-
-	writel(1 << port_no, mmio + HOST_IRQ_STAT);
+	ahci_port_clear_pending_irq(ap);
 
 	/* mark esata ports */
 	tmp = readl(port_mmio + PORT_CMD);
@@ -1603,6 +1612,8 @@ int ahci_do_hardreset(struct ata_link *link, unsigned int *class,
 	tf.status = ATA_BUSY;
 	ata_tf_to_fis(&tf, 0, 0, d2h_fis);
 
+	ahci_port_clear_pending_irq(ap);
+
 	rc = sata_link_hardreset(link, timing, deadline, online,
 				 ahci_check_ready);
 

drivers/ata/libata-core.c

@@ -4783,11 +4783,8 @@ void ata_qc_complete(struct ata_queued_cmd *qc)
 	 * been aborted by the device due to a limit timeout using the policy
 	 * 0xD. For these commands, invoke EH to get the command sense data.
 	 */
-	if (qc->result_tf.status & ATA_SENSE &&
-	    ((ata_is_ncq(qc->tf.protocol) &&
-	      dev->flags & ATA_DFLAG_CDL_ENABLED) ||
-	     (!ata_is_ncq(qc->tf.protocol) &&
-	      ata_id_sense_reporting_enabled(dev->id)))) {
+	if (qc->flags & ATA_QCFLAG_HAS_CDL &&
+	    qc->result_tf.status & ATA_SENSE) {
 		/*
 		 * Tell SCSI EH to not overwrite scmd->result even if this
 		 * command is finished with result SAM_STAT_GOOD.

drivers/ata/libata-eh.c

@@ -2796,23 +2796,13 @@ int ata_eh_reset(struct ata_link *link, int classify,
 		}
 	}
 
-	/*
-	 * Some controllers can't be frozen very well and may set spurious
-	 * error conditions during reset.  Clear accumulated error
-	 * information and re-thaw the port if frozen.  As reset is the
-	 * final recovery action and we cross check link onlineness against
-	 * device classification later, no hotplug event is lost by this.
-	 */
+	/* clear cached SError */
 	spin_lock_irqsave(link->ap->lock, flags);
-	memset(&link->eh_info, 0, sizeof(link->eh_info));
+	link->eh_info.serror = 0;
 	if (slave)
-		memset(&slave->eh_info, 0, sizeof(link->eh_info));
-	ap->pflags &= ~ATA_PFLAG_EH_PENDING;
+		slave->eh_info.serror = 0;
 	spin_unlock_irqrestore(link->ap->lock, flags);
 
-	if (ata_port_is_frozen(ap))
-		ata_eh_thaw_port(ap);
-
 	/*
 	 * Make sure onlineness and classification result correspond.
 	 * Hotplug could have happened during reset and some

drivers/ata/libata-sata.c

@@ -396,10 +396,23 @@ int sata_link_scr_lpm(struct ata_link *link, enum ata_lpm_policy policy,
 	case ATA_LPM_MED_POWER_WITH_DIPM:
 	case ATA_LPM_MIN_POWER_WITH_PARTIAL:
 	case ATA_LPM_MIN_POWER:
-		if (ata_link_nr_enabled(link) > 0)
-			/* no restrictions on LPM transitions */
+		if (ata_link_nr_enabled(link) > 0) {
+			/* assume no restrictions on LPM transitions */
 			scontrol &= ~(0x7 << 8);
-		else {
+
+			/*
+			 * If the controller does not support partial, slumber,
+			 * or devsleep, then disallow these transitions.
+			 */
+			if (link->ap->host->flags & ATA_HOST_NO_PART)
+				scontrol |= (0x1 << 8);
+
+			if (link->ap->host->flags & ATA_HOST_NO_SSC)
+				scontrol |= (0x2 << 8);
+
+			if (link->ap->host->flags & ATA_HOST_NO_DEVSLP)
+				scontrol |= (0x4 << 8);
+		} else {
 			/* empty port, power off */
 			scontrol &= ~0xf;
 			scontrol |= (0x1 << 2);

drivers/ata/pata_parport/comm.c

@@ -37,7 +37,7 @@ static int comm_read_regr(struct pi_adapter *pi, int cont, int regr)
 {
 	int l, h, r;
 
-        r = regr + cont_map[cont];
+	r = regr + cont_map[cont];
 
 	switch (pi->mode) {
 	case 0:
@@ -90,7 +90,6 @@ static void comm_connect(struct pi_adapter *pi)
 }
 
 static void comm_disconnect(struct pi_adapter *pi)
-
 {
 	w2(0); w2(0); w2(0); w2(4);
 	w0(pi->saved_r0);
@@ -172,12 +171,12 @@ static void comm_write_block(struct pi_adapter *pi, char *buf, int count)
 			w4l(swab16(((u16 *)buf)[2 * k]) |
 			    swab16(((u16 *)buf)[2 * k + 1]) << 16);
 		break;
-        }
+	}
 }
 
 static void comm_log_adapter(struct pi_adapter *pi)
-
-{       char *mode_string[5] = { "4-bit", "8-bit", "EPP-8", "EPP-16", "EPP-32" };
+{
+	char *mode_string[5] = { "4-bit", "8-bit", "EPP-8", "EPP-16", "EPP-32" };
 
 	dev_info(&pi->dev,
 		 "DataStor Commuter at 0x%x, mode %d (%s), delay %d\n",

drivers/ata/sata_mv.c

@@ -1255,8 +1255,8 @@ static void mv_dump_mem(struct device *dev, void __iomem *start, unsigned bytes)
 
 	for (b = 0; b < bytes; ) {
 		for (w = 0, o = 0; b < bytes && w < 4; w++) {
-			o += snprintf(linebuf + o, sizeof(linebuf) - o,
-				      "%08x ", readl(start + b));
+			o += scnprintf(linebuf + o, sizeof(linebuf) - o,
+				       "%08x ", readl(start + b));
 			b += sizeof(u32);
 		}
 		dev_dbg(dev, "%s: %p: %s\n",

include/linux/libata.h

@@ -222,6 +222,10 @@ enum {
 	ATA_HOST_PARALLEL_SCAN	= (1 << 2),	/* Ports on this host can be scanned in parallel */
 	ATA_HOST_IGNORE_ATA	= (1 << 3),	/* Ignore ATA devices on this host. */
 
+	ATA_HOST_NO_PART	= (1 << 4), /* Host does not support partial */
+	ATA_HOST_NO_SSC		= (1 << 5), /* Host does not support slumber */
+	ATA_HOST_NO_DEVSLP	= (1 << 6), /* Host does not support devslp */
+
 	/* bits 24:31 of host->flags are reserved for LLD specific flags */
 
 	/* various lengths of time */