pinctrl: renesas: rzg2l: Limit 2.5V power supply to Ethernet interfaces

The RZ/G3S SoC supports configurable supply voltages for several of its
I/O interfaces. All of these interfaces support both 1.8V and 3.3V
supplies, but only the Ethernet and XSPI interfaces support a 2.5V
supply.

Voltage selection for the XSPI interface is not yet supported, so this
leaves only the Ethernet interfaces currently supporting selection of a
2.5V supply. So we need to return an error if there is an attempt to
select a 2.5V supply for any non-Ethernet interface.

Fixes: 5199695 ("pinctrl: renesas: rzg2l: Add support to select power source for Ethernet pins")
Signed-off-by: Paul Barker <paul.barker.ct@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240417114132.6605-1-paul.barker.ct@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

Author: pbrkr

drivers/pinctrl/renesas/pinctrl-rzg2l.c

@@ -892,6 +892,8 @@ static int rzg2l_set_power_source(struct rzg2l_pinctrl *pctrl, u32 pin, u32 caps
 		val = PVDD_1800;
 		break;
 	case 2500:
+		if (!(caps & (PIN_CFG_IO_VMC_ETH0 | PIN_CFG_IO_VMC_ETH1)))
+			return -EINVAL;
 		val = PVDD_2500;
 		break;
 	case 3300: