arm64: dts: ti: j7200-main: Add CPSW5G nodes

TI's J7200 SoC has a 5 port Ethernet Switch instance with 4 external
ports and 1 host port, referred to as CPSW5G.

Add device-tree nodes for CPSW5G and disable it by default. Device-tree
overlays will be used to enable it.

Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Reviewed-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20230315062307.1612220-4-s-vadapalli@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>

Author: Siddharth-Vadapalli-at-TI

arch/arm64/boot/dts/ti/k3-j7200-main.dtsi

@@ -39,6 +39,13 @@
 					<0x4088 0x3>, <0x408c 0x3>; /* SERDES0 lane2/3 select */
 		};
 
+		cpsw0_phy_gmii_sel: phy@4044 {
+			compatible = "ti,j7200-cpsw5g-phy-gmii-sel";
+			ti,qsgmii-main-ports = <1>;
+			reg = <0x4044 0x10>;
+			#phy-cells = <1>;
+		};
+
 		usb_serdes_mux: mux-controller@4000 {
 			compatible = "mmio-mux";
 			#mux-control-cells = <1>;
@@ -304,6 +311,87 @@
 		};
 	};
 
+	cpsw0: ethernet@c000000 {
+		compatible = "ti,j7200-cpswxg-nuss";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		reg = <0x00 0xc000000 0x00 0x200000>;
+		reg-names = "cpsw_nuss";
+		ranges = <0x00 0x00 0x00 0xc000000 0x00 0x200000>;
+		clocks = <&k3_clks 19 33>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 19 TI_SCI_PD_EXCLUSIVE>;
+
+		dmas = <&main_udmap 0xca00>,
+		       <&main_udmap 0xca01>,
+		       <&main_udmap 0xca02>,
+		       <&main_udmap 0xca03>,
+		       <&main_udmap 0xca04>,
+		       <&main_udmap 0xca05>,
+		       <&main_udmap 0xca06>,
+		       <&main_udmap 0xca07>,
+		       <&main_udmap 0x4a00>;
+		dma-names = "tx0", "tx1", "tx2", "tx3",
+			    "tx4", "tx5", "tx6", "tx7",
+			    "rx";
+
+		status = "disabled";
+
+		ethernet-ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cpsw0_port1: port@1 {
+				reg = <1>;
+				ti,mac-only;
+				label = "port1";
+				status = "disabled";
+			};
+
+			cpsw0_port2: port@2 {
+				reg = <2>;
+				ti,mac-only;
+				label = "port2";
+				status = "disabled";
+			};
+
+			cpsw0_port3: port@3 {
+				reg = <3>;
+				ti,mac-only;
+				label = "port3";
+				status = "disabled";
+			};
+
+			cpsw0_port4: port@4 {
+				reg = <4>;
+				ti,mac-only;
+				label = "port4";
+				status = "disabled";
+			};
+		};
+
+		cpsw5g_mdio: mdio@f00 {
+			compatible = "ti,cpsw-mdio","ti,davinci_mdio";
+			reg = <0x00 0xf00 0x00 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&k3_clks 19 33>;
+			clock-names = "fck";
+			bus_freq = <1000000>;
+			status = "disabled";
+		};
+
+		cpts@3d000 {
+			compatible = "ti,j721e-cpts";
+			reg = <0x00 0x3d000 0x00 0x400>;
+			clocks = <&k3_clks 19 16>;
+			clock-names = "cpts";
+			interrupts-extended = <&gic500 GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "cpts";
+			ti,cpts-ext-ts-inputs = <4>;
+			ti,cpts-periodic-outputs = <2>;
+		};
+	};
+
 	main_pmx0: pinctrl@11c000 {
 		compatible = "pinctrl-single";
 		/* Proxy 0 addressing */