Merge tag 'for-v5.16-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply

Pull power supply fixes from Sebastian Reichel:
 "Three fixes for the 5.16 cycle:

   - Avoid going beyond last capacity in the power-supply core

   - Replace 1E6L with NSEC_PER_MSEC to avoid floating point calculation
     in LLVM resulting in a build failure

   - Fix ADC measurements in bq25890 charger driver"

* tag 'for-v5.16-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply:
  power: reset: ltc2952: Fix use of floating point literals
  power: bq25890: Enable continuous conversion for ADC at charging
  power: supply: core: Break capacity loop

Author: torvalds

drivers/power/reset/ltc2952-poweroff.c

@@ -159,8 +159,8 @@ static void ltc2952_poweroff_kill(void)
 
 static void ltc2952_poweroff_default(struct ltc2952_poweroff *data)
 {
-	data->wde_interval = 300L * 1E6L;
-	data->trigger_delay = ktime_set(2, 500L*1E6L);
+	data->wde_interval = 300L * NSEC_PER_MSEC;
+	data->trigger_delay = ktime_set(2, 500L * NSEC_PER_MSEC);
 
 	hrtimer_init(&data->timer_trigger, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
 	data->timer_trigger.function = ltc2952_poweroff_timer_trigger;

drivers/power/supply/bq25890_charger.c

@@ -581,12 +581,12 @@ static irqreturn_t __bq25890_handle_irq(struct bq25890_device *bq)
 
 	if (!new_state.online && bq->state.online) {	    /* power removed */
 		/* disable ADC */
-		ret = bq25890_field_write(bq, F_CONV_START, 0);
+		ret = bq25890_field_write(bq, F_CONV_RATE, 0);
 		if (ret < 0)
 			goto error;
 	} else if (new_state.online && !bq->state.online) { /* power inserted */
 		/* enable ADC, to have control of charge current/voltage */
-		ret = bq25890_field_write(bq, F_CONV_START, 1);
+		ret = bq25890_field_write(bq, F_CONV_RATE, 1);
 		if (ret < 0)
 			goto error;
 	}

drivers/power/supply/power_supply_core.c

@@ -853,6 +853,10 @@ power_supply_find_ocv2cap_table(struct power_supply_battery_info *info,
 		return NULL;
 
 	for (i = 0; i < POWER_SUPPLY_OCV_TEMP_MAX; i++) {
+		/* Out of capacity tables */
+		if (!info->ocv_table[i])
+			break;
+
 		temp_diff = abs(info->ocv_temp[i] - temp);
 
 		if (temp_diff < best_temp_diff) {