Merge tag 'pinctrl-v6.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

Pull pin control updates from Linus Walleij:
 "Nothing special, notably a lot of new Qualcomm hardware is supported,
  a RISC-V reference SoC and then some cleanups both in code and device
  tree bindings.

  Core changes:

   - Add PINCTRL_PINFUNCTION() macro and use it in several drivers

  New drivers:

   - New driver for the StarFive JH7110 SoC "sys" and "aon" (always-on)
     pin controllers. (RISC-V.)

   - New subdriver for the Qualcomm QDU1000/QRU1000 SoC pin controller

   - New subdrivers for the Qualcomm SM8550 SoC and LPASS pin
     controllers

   - New subdriver for the Qualcomm SA8775P SoC pin controller

   - New subdriver for the Qualcomm IPQ5332 SoC pin controller

   - New (trivial) support for Qualcomm PM8550 and PMR735D PMIC pin
     control

   - New subdriver for the Mediatek MT7981 SoC pin controller

  Improvements:

   - Several cleanups and refactorings to the Intel drivers

   - Add 4KOhm bias support to the Intel driver

   - Use the NOIRQ_SYSTEM_SLEEP_PM_OPS for the AT91 driver

   - Support general purpose clocks in the Qualcomm MSM8226 SoC

   - Several conversions to use the new I2C .probe_new() call

   - Massive clean-up of the Qualcomm Device Tree YAML schemas

   - Add VIN[45] pins, groups and functions to the Renesas r8a77950 SoC
     driver"

* tag 'pinctrl-v6.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (118 commits)
  pinctrl: qcom: Add support for i2c specific pull feature
  pinctrl: starfive: Add StarFive JH7110 aon controller driver
  pinctrl: starfive: Add StarFive JH7110 sys controller driver
  dt-bindings: pinctrl: Add StarFive JH7110 aon pinctrl
  dt-bindings: pinctrl: Add StarFive JH7110 sys pinctrl
  pinctrl: add mt7981 pinctrl driver
  dt-bindings: pinctrl: add bindings for MT7981 SoC
  dt-bindings: pinctrl: rockchip,pinctrl: mark gpio sub nodes of pinctrl as deprecated
  pinctrl: qcom: Introduce IPQ5332 TLMM driver
  dt-bindings: pinctrl: qcom: add IPQ5332 pinctrl
  dt-bindings: pinctrl: qcom: lpass-lpi: correct GPIO name pattern
  pinctrl: qcom: pinctrl-sm8550-lpass-lpi: add SM8550 LPASS
  dt-bindings: pinctrl: qcom,sm8550-lpass-lpi-pinctrl: add SM8550 LPASS
  pinctrl: at91: use devm_kasprintf() to avoid potential leaks
  dt-bindings: pinctrl: qcom: correct gpio-ranges in examples
  dt-bindings: pinctrl: qcom,msm8994: correct number of GPIOs
  dt-bindings: pinctrl: qcom,sdx55: correct GPIO name pattern
  dt-bindings: pinctrl: qcom,msm8953: correct GPIO name pattern
  dt-bindings: pinctrl: qcom,sm6375: correct GPIO name pattern and example
  dt-bindings: pinctrl: qcom,msm8909: correct GPIO name pattern and example
  ...

Author: torvalds

…bindings/pinctrl/fsl,imx8mm-pinctrl.yaml …/bindings/pinctrl/fsl,imx8m-pinctrl.yamlDocumentation/devicetree/bindings/pinctrl/fsl,imx8mm-pinctrl.yaml renamed to Documentation/devicetree/bindings/pinctrl/fsl,imx8m-pinctrl.yaml Documentation/devicetree/bindings/pinctrl/fsl,imx8mm-pinctrl.yaml renamed to Documentation/devicetree/bindings/pinctrl/fsl,imx8m-pinctrl.yaml

@@ -1,21 +1,25 @@
-# SPDX-License-Identifier: GPL-2.0
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: http://devicetree.org/schemas/pinctrl/fsl,imx8mm-pinctrl.yaml#
+$id: http://devicetree.org/schemas/pinctrl/fsl,imx8m-pinctrl.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Freescale IMX8MM IOMUX Controller
+title: Freescale IMX8M IOMUX Controller
 
 maintainers:
-  - Anson Huang <Anson.Huang@nxp.com>
+  - Peng Fan <peng.fan@nxp.com>
 
 description:
   Please refer to fsl,imx-pinctrl.txt and pinctrl-bindings.txt in this directory
   for common binding part and usage.
 
 properties:
   compatible:
-    const: fsl,imx8mm-iomuxc
+    enum:
+      - fsl,imx8mm-iomuxc
+      - fsl,imx8mn-iomuxc
+      - fsl,imx8mp-iomuxc
+      - fsl,imx8mq-iomuxc
 
   reg:
     maxItems: 1
@@ -34,9 +38,10 @@ patternProperties:
           each entry consists of 6 integers and represents the mux and config
           setting for one pin. The first 5 integers <mux_reg conf_reg input_reg
           mux_val input_val> are specified using a PIN_FUNC_ID macro, which can
-          be found in <arch/arm64/boot/dts/freescale/imx8mm-pinfunc.h>. The last
-          integer CONFIG is the pad setting value like pull-up on this pin. Please
-          refer to i.MX8M Mini Reference Manual for detailed CONFIG settings.
+          be found in <arch/arm64/boot/dts/freescale/imx8m[m,n,p,q]-pinfunc.h>.
+          The last integer CONFIG is the pad setting value like pull-up on this
+          pin. Please refer to i.MX8M Mini/Nano/Plus/Quad Reference Manual for
+          detailed CONFIG settings.
         $ref: /schemas/types.yaml#/definitions/uint32-matrix
         items:
           items:
@@ -51,7 +56,8 @@ patternProperties:
             - description: |
                 "input_val" indicates the select input value to be applied.
             - description: |
-                "pad_setting" indicates the pad configuration value to be applied.
+                "pad_setting" indicates the pad configuration value to be
+                applied.
 
     required:
       - fsl,pins

Documentation/devicetree/bindings/pinctrl/fsl,imx8mn-pinctrl.yaml

@@ -70,11 +70,11 @@ allOf:
   - $ref: "pinctrl.yaml#"
 
 patternProperties:
-  '-[0-9]+$':
+  'pins$':
     type: object
     additionalProperties: false
     patternProperties:
-      'pins':
+      '(^pins|pins?$)':
         type: object
         additionalProperties: false
         description: |
@@ -158,23 +158,23 @@ examples:
               <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
               <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
 
-          i2c0_pins_a: i2c0-0 {
+          i2c0_pins_a: i2c0-pins {
             pins1 {
               pinmux = <MT8135_PIN_100_SDA0__FUNC_SDA0>,
                 <MT8135_PIN_101_SCL0__FUNC_SCL0>;
               bias-disable;
             };
           };
 
-          i2c1_pins_a: i2c1-0 {
+          i2c1_pins_a: i2c1-pins {
             pins {
               pinmux = <MT8135_PIN_195_SDA1__FUNC_SDA1>,
                 <MT8135_PIN_196_SCL1__FUNC_SCL1>;
               bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
             };
           };
 
-          i2c2_pins_a: i2c2-0 {
+          i2c2_pins_a: i2c2-pins {
             pins1 {
               pinmux = <MT8135_PIN_193_SDA2__FUNC_SDA2>;
               bias-pull-down;
@@ -186,7 +186,7 @@ examples:
             };
           };
 
-          i2c3_pins_a: i2c3-0 {
+          i2c3_pins_a: i2c3-pins {
             pins1 {
               pinmux = <MT8135_PIN_40_DAC_CLK__FUNC_GPIO40>,
                 <MT8135_PIN_41_DAC_WS__FUNC_GPIO41>;

Documentation/devicetree/bindings/pinctrl/fsl,imx8mp-pinctrl.yaml

@@ -61,11 +61,11 @@ then:
     - "#interrupt-cells"
 
 patternProperties:
-  '-[0-9]+$':
+  '-pins(-[a-z]+)?$':
     type: object
     additionalProperties: false
     patternProperties:
-      'mux':
+      '^mux(-|$)':
         type: object
         additionalProperties: false
         description: |
@@ -244,7 +244,7 @@ patternProperties:
                 groups:
                   enum: [wf0_2g, wf0_5g]
 
-      'conf':
+      '^conf(-|$)':
         type: object
         additionalProperties: false
         description: |
@@ -348,7 +348,7 @@ examples:
           gpio-controller;
           #gpio-cells = <2>;
 
-          pinctrl_eth_default: eth-0 {
+          pinctrl_eth_default: eth-pins {
             mux-mdio {
               groups = "mdc_mdio";
               function = "eth";