Merge branch 'for-6.7' into for-next

Author: htejun

.mailmap

@@ -377,6 +377,7 @@ Matthew Wilcox <willy@infradead.org> <willy@debian.org>
 Matthew Wilcox <willy@infradead.org> <willy@linux.intel.com>
 Matthew Wilcox <willy@infradead.org> <willy@parisc-linux.org>
 Matthias Fuchs <socketcan@esd.eu> <matthias.fuchs@esd.eu>
+Matthieu Baerts <matttbe@kernel.org> <matthieu.baerts@tessares.net>
 Matthieu CASTET <castet.matthieu@free.fr>
 Matti Vaittinen <mazziesaccount@gmail.com> <matti.vaittinen@fi.rohmeurope.com>
 Matt Ranostay <matt.ranostay@konsulko.com> <matt@ranostay.consulting>

Documentation/ABI/testing/sysfs-class-firmware

@@ -1,7 +1,7 @@
 What: 		/sys/class/firmware/.../data
 Date:		July 2022
 KernelVersion:	5.19
-Contact:	Russ Weight <russell.h.weight@intel.com>
+Contact:	Russ Weight <russ.weight@linux.dev>
 Description:	The data sysfs file is used for firmware-fallback and for
 		firmware uploads. Cat a firmware image to this sysfs file
 		after you echo 1 to the loading sysfs file. When the firmware
@@ -13,7 +13,7 @@ Description:	The data sysfs file is used for firmware-fallback and for
 What: 		/sys/class/firmware/.../cancel
 Date:		July 2022
 KernelVersion:	5.19
-Contact:	Russ Weight <russell.h.weight@intel.com>
+Contact:	Russ Weight <russ.weight@linux.dev>
 Description:	Write-only. For firmware uploads, write a "1" to this file to
 		request that the transfer of firmware data to the lower-level
 		device be canceled. This request will be rejected (EBUSY) if
@@ -23,7 +23,7 @@ Description:	Write-only. For firmware uploads, write a "1" to this file to
 What: 		/sys/class/firmware/.../error
 Date:		July 2022
 KernelVersion:	5.19
-Contact:	Russ Weight <russell.h.weight@intel.com>
+Contact:	Russ Weight <russ.weight@linux.dev>
 Description:	Read-only. Returns a string describing a failed firmware
 		upload. This string will be in the form of <STATUS>:<ERROR>,
 		where <STATUS> will be one of the status strings described
@@ -37,7 +37,7 @@ Description:	Read-only. Returns a string describing a failed firmware
 What: 		/sys/class/firmware/.../loading
 Date:		July 2022
 KernelVersion:	5.19
-Contact:	Russ Weight <russell.h.weight@intel.com>
+Contact:	Russ Weight <russ.weight@linux.dev>
 Description:	The loading sysfs file is used for both firmware-fallback and
 		for firmware uploads. Echo 1 onto the loading file to indicate
 		you are writing a firmware file to the data sysfs node. Echo
@@ -49,7 +49,7 @@ Description:	The loading sysfs file is used for both firmware-fallback and
 What: 		/sys/class/firmware/.../remaining_size
 Date:		July 2022
 KernelVersion:	5.19
-Contact:	Russ Weight <russell.h.weight@intel.com>
+Contact:	Russ Weight <russ.weight@linux.dev>
 Description:	Read-only. For firmware upload, this file contains the size
 		of the firmware data that remains to be transferred to the
 		lower-level device driver. The size value is initialized to
@@ -62,15 +62,15 @@ Description:	Read-only. For firmware upload, this file contains the size
 What: 		/sys/class/firmware/.../status
 Date:		July 2022
 KernelVersion:	5.19
-Contact:	Russ Weight <russell.h.weight@intel.com>
+Contact:	Russ Weight <russ.weight@linux.dev>
 Description:	Read-only. Returns a string describing the current status of
 		a firmware upload. The string will be one of the following:
 		idle, "receiving", "preparing", "transferring", "programming".
 
 What: 		/sys/class/firmware/.../timeout
 Date:		July 2022
 KernelVersion:	5.19
-Contact:	Russ Weight <russell.h.weight@intel.com>
+Contact:	Russ Weight <russ.weight@linux.dev>
 Description:	This file supports the timeout mechanism for firmware
 		fallback.  This file has no affect on firmware uploads. For
 		more information on timeouts please see the documentation

Documentation/admin-guide/cgroup-v1/memory.rst

@@ -92,6 +92,13 @@ Brief summary of control files.
  memory.oom_control		     set/show oom controls.
  memory.numa_stat		     show the number of memory usage per numa
 				     node
+ memory.kmem.limit_in_bytes          Deprecated knob to set and read the kernel
+                                     memory hard limit. Kernel hard limit is not
+                                     supported since 5.16. Writing any value to
+                                     do file will not have any effect same as if
+                                     nokmem kernel parameter was specified.
+                                     Kernel memory is still charged and reported
+                                     by memory.kmem.usage_in_bytes.
  memory.kmem.usage_in_bytes          show current kernel memory allocation
  memory.kmem.failcnt                 show the number of kernel memory usage
 				     hits limits

Documentation/arch/arm64/silicon-errata.rst

@@ -71,6 +71,8 @@ stable kernels.
 +----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-A510     | #2658417        | ARM64_ERRATUM_2658417       |
 +----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-A520     | #2966298        | ARM64_ERRATUM_2966298       |
++----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-A53      | #826319         | ARM64_ERRATUM_826319        |
 +----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-A53      | #827319         | ARM64_ERRATUM_827319        |

Documentation/devicetree/bindings/ata/pata-common.yaml

@@ -38,6 +38,7 @@ patternProperties:
       ID number 0 and the slave drive will have ID number 1. The PATA port
       nodes will be named "ide-port".
     type: object
+    additionalProperties: false
 
     properties:
       reg:

Documentation/devicetree/bindings/bus/fsl,imx8qxp-pixel-link-msi-bus.yaml

@@ -73,9 +73,6 @@ patternProperties:
   "^.*@[0-9a-f]+$":
     description: Devices attached to the bus
     type: object
-    properties:
-      reg:
-        maxItems: 1
 
     required:
       - reg

Documentation/devicetree/bindings/cache/andestech,ax45mp-cache.yaml

@@ -69,7 +69,7 @@ examples:
   - |
     #include <dt-bindings/interrupt-controller/irq.h>
 
-    cache-controller@2010000 {
+    cache-controller@13400000 {
         compatible = "andestech,ax45mp-cache", "cache";
         reg = <0x13400000 0x100000>;
         interrupts = <508 IRQ_TYPE_LEVEL_HIGH>;

Documentation/devicetree/bindings/clock/renesas,5p35023.yaml

@@ -37,6 +37,9 @@ properties:
     maxItems: 1
 
   '#clock-cells':
+    description:
+      The index in the assigned-clocks is mapped to the output clock as below
+      0 - REF, 1 - SE1, 2 - SE2, 3 - SE3, 4 - DIFF1, 5 - DIFF2.
     const: 1
 
   clocks:
@@ -68,7 +71,7 @@ examples:
             reg = <0x68>;
             #clock-cells = <1>;
 
-            clocks = <&x1_x2>;
+            clocks = <&x1>;
 
             renesas,settings = [
                 80 00 11 19 4c 02 23 7f 83 19 08 a9 5f 25 24 bf
@@ -79,8 +82,8 @@ examples:
             assigned-clocks = <&versa3 0>, <&versa3 1>,
                               <&versa3 2>, <&versa3 3>,
                               <&versa3 4>, <&versa3 5>;
-            assigned-clock-rates = <12288000>, <25000000>,
-                                   <12000000>, <11289600>,
-                                   <11289600>, <24000000>;
+            assigned-clock-rates = <24000000>, <11289600>,
+                                   <11289600>, <12000000>,
+                                   <25000000>, <12288000>;
         };
     };

Documentation/devicetree/bindings/display/imx/fsl,imx6-hdmi.yaml

@@ -87,7 +87,7 @@ required:
   - interrupts
   - ports
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |

Documentation/devicetree/bindings/dma/xilinx/xlnx,zynqmp-dma-1.0.yaml

@@ -13,6 +13,8 @@ description: |
 
 maintainers:
   - Michael Tretter <m.tretter@pengutronix.de>
+  - Harini Katakam <harini.katakam@amd.com>
+  - Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
 
 allOf:
   - $ref: ../dma-controller.yaml#
@@ -65,6 +67,7 @@ required:
   - interrupts
   - clocks
   - clock-names
+  - xlnx,bus-width
 
 additionalProperties: false