Merge tag 'thermal-v6.8-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux into thermal

Merge thermal control material for 6.8-rc1 from Daniel Lezcano:

"- Converted Mediatek Thermal to the json-schema (Rafał Miłecki)

 - Fixed DT bindings issue on Loongson (Binbin Zhou)

 - Fixed returning NULL instead of -ENODEV on Loogsoo (Binbin Zhou)

 - Added the DT binding for the tsens on SM8650 platform (Neil Armstrong)

 - Added a reboot on critical option feature (Fabio Estevam)

 - Made usage of DEFINE_SIMPLE_DEV_PM_OPS on AmLogic (Uwe Kleine-König)

 - Added the D1/T113s THS controller support on Sun8i (Maxim Kiselev)

 - Fixed example in the DT binding for QCom SPMI (Johan Hovold)

 - Fixed compilation warning for the tmon utility (Florian Eckert)

 - Added interrupt based configuration on Exynos along with a set of
   related cleanups (Mateusz Majewski)"

* tag 'thermal-v6.8-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux: (24 commits)
  thermal/drivers/exynos: Use set_trips ops
  thermal/drivers/exynos: Use BIT wherever possible
  thermal/drivers/exynos: Split initialization of TMU and the thermal zone
  thermal/drivers/exynos: Stop using the threshold mechanism on Exynos 4210
  thermal/drivers/exynos: Simplify regulator (de)initialization
  thermal/drivers/exynos: Handle devm_regulator_get_optional return value correctly
  thermal/drivers/exynos: Wwitch from workqueue-driven interrupt handling to threaded interrupts
  thermal/drivers/exynos: Drop id field
  thermal/drivers/exynos: Remove an unnecessary field description
  tools/thermal/tmon: Fix compilation warning for wrong format
  dt-bindings: thermal: qcom-spmi-adc-tm5/hc: Clean up examples
  dt-bindings: thermal: qcom-spmi-adc-tm5/hc: Fix example node names
  thermal/drivers/sun8i: Add D1/T113s THS controller support
  dt-bindings: thermal: sun8i: Add binding for D1/T113s THS controller
  thermal: amlogic: Use DEFINE_SIMPLE_DEV_PM_OPS for PM functions
  thermal: amlogic: Make amlogic_thermal_disable() return void
  thermal/thermal_of: Allow rebooting after critical temp
  reboot: Introduce thermal_zone_device_critical_reboot()
  thermal/core: Prepare for introduction of thermal reboot
  dt-bindings: thermal-zones: Document critical-action
  ...

Author: rafaeljw

Documentation/devicetree/bindings/thermal/allwinner,sun8i-a83t-ths.yaml

@@ -16,6 +16,7 @@ properties:
       - allwinner,sun8i-a83t-ths
       - allwinner,sun8i-h3-ths
       - allwinner,sun8i-r40-ths
+      - allwinner,sun20i-d1-ths
       - allwinner,sun50i-a64-ths
       - allwinner,sun50i-a100-ths
       - allwinner,sun50i-h5-ths
@@ -61,6 +62,7 @@ allOf:
         compatible:
           contains:
             enum:
+              - allwinner,sun20i-d1-ths
               - allwinner,sun50i-a100-ths
               - allwinner,sun50i-h6-ths
 
@@ -84,7 +86,9 @@ allOf:
       properties:
         compatible:
           contains:
-            const: allwinner,sun8i-h3-ths
+            enum:
+              - allwinner,sun8i-h3-ths
+              - allwinner,sun20i-d1-ths
 
     then:
       properties:
@@ -103,6 +107,7 @@ allOf:
             enum:
               - allwinner,sun8i-h3-ths
               - allwinner,sun8i-r40-ths
+              - allwinner,sun20i-d1-ths
               - allwinner,sun50i-a64-ths
               - allwinner,sun50i-a100-ths
               - allwinner,sun50i-h5-ths

Documentation/devicetree/bindings/thermal/loongson,ls2k-thermal.yaml

@@ -10,6 +10,9 @@ maintainers:
   - zhanghongchen <zhanghongchen@loongson.cn>
   - Yinbo Zhu <zhuyinbo@loongson.cn>
 
+allOf:
+  - $ref: /schemas/thermal/thermal-sensor.yaml#
+
 properties:
   compatible:
     oneOf:
@@ -26,12 +29,16 @@ properties:
   interrupts:
     maxItems: 1
 
+  '#thermal-sensor-cells':
+    const: 1
+
 required:
   - compatible
   - reg
   - interrupts
+  - '#thermal-sensor-cells'
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
@@ -41,4 +48,5 @@ examples:
         reg = <0x1fe01500 0x30>;
         interrupt-parent = <&liointc0>;
         interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+        #thermal-sensor-cells = <1>;
     };

Documentation/devicetree/bindings/thermal/mediatek,thermal.yaml

@@ -0,0 +1,99 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/thermal/mediatek,thermal.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek thermal controller for on-SoC temperatures
+
+maintainers:
+  - Sascha Hauer <s.hauer@pengutronix.de>
+
+description:
+  This device does not have its own ADC, instead it directly controls the AUXADC
+  via AHB bus accesses. For this reason it needs phandles to the AUXADC. Also it
+  controls a mux in the apmixedsys register space via AHB bus accesses, so a
+  phandle to the APMIXEDSYS is also needed.
+
+allOf:
+  - $ref: thermal-sensor.yaml#
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt2701-thermal
+      - mediatek,mt2712-thermal
+      - mediatek,mt7622-thermal
+      - mediatek,mt7981-thermal
+      - mediatek,mt7986-thermal
+      - mediatek,mt8173-thermal
+      - mediatek,mt8183-thermal
+      - mediatek,mt8365-thermal
+      - mediatek,mt8516-thermal
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Main clock needed for register access
+      - description: The AUXADC clock
+
+  clock-names:
+    items:
+      - const: therm
+      - const: auxadc
+
+  mediatek,auxadc:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: A phandle to the AUXADC which the thermal controller uses
+
+  mediatek,apmixedsys:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: A phandle to the APMIXEDSYS controller
+
+  resets:
+    description: Reset controller controlling the thermal controller
+
+  nvmem-cells:
+    items:
+      - description:
+          NVMEM cell with EEPROMA phandle to the calibration data provided by an
+          NVMEM device. If unspecified default values shall be used.
+
+  nvmem-cell-names:
+    items:
+      - const: calibration-data
+
+required:
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - mediatek,auxadc
+  - mediatek,apmixedsys
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/clock/mt8173-clk.h>
+    #include <dt-bindings/reset/mt8173-resets.h>
+
+    thermal@1100b000 {
+        compatible = "mediatek,mt8173-thermal";
+        reg = <0x1100b000 0x1000>;
+        interrupts = <0 70 IRQ_TYPE_LEVEL_LOW>;
+        clocks = <&pericfg CLK_PERI_THERM>, <&pericfg CLK_PERI_AUXADC>;
+        clock-names = "therm", "auxadc";
+        resets = <&pericfg MT8173_PERI_THERM_SW_RST>;
+        mediatek,auxadc = <&auxadc>;
+        mediatek,apmixedsys = <&apmixedsys>;
+        nvmem-cells = <&thermal_calibration_data>;
+        nvmem-cell-names = "calibration-data";
+        #thermal-sensor-cells = <1>;
+    };

Documentation/devicetree/bindings/thermal/mediatek-thermal.txt

@@ -114,12 +114,14 @@ examples:
   - |
     #include <dt-bindings/iio/qcom,spmi-vadc.h>
     #include <dt-bindings/interrupt-controller/irq.h>
-    spmi_bus {
+
+    pmic {
         #address-cells = <1>;
         #size-cells = <0>;
+
         pm8998_adc: adc@3100 {
-            reg = <0x3100>;
             compatible = "qcom,spmi-adc-rev2";
+            reg = <0x3100>;
             #address-cells = <1>;
             #size-cells = <0>;
             #io-channel-cells = <1>;
@@ -130,7 +132,7 @@ examples:
             };
         };
 
-        pm8998_adc_tm: adc-tm@3400 {
+        adc-tm@3400 {
             compatible = "qcom,spmi-adc-tm-hc";
             reg = <0x3400>;
             interrupts = <0x2 0x34 0x0 IRQ_TYPE_EDGE_RISING>;

Documentation/devicetree/bindings/thermal/qcom-spmi-adc-tm-hc.yaml

@@ -167,12 +167,14 @@ examples:
   - |
     #include <dt-bindings/iio/qcom,spmi-vadc.h>
     #include <dt-bindings/interrupt-controller/irq.h>
-    spmi_bus {
+
+    pmic {
         #address-cells = <1>;
         #size-cells = <0>;
+
         pm8150b_adc: adc@3100 {
-            reg = <0x3100>;
             compatible = "qcom,spmi-adc5";
+            reg = <0x3100>;
             #address-cells = <1>;
             #size-cells = <0>;
             #io-channel-cells = <1>;
@@ -186,7 +188,7 @@ examples:
             };
         };
 
-        pm8150b_adc_tm: adc-tm@3500 {
+        adc-tm@3500 {
             compatible = "qcom,spmi-adc-tm5";
             reg = <0x3500>;
             interrupts = <0x2 0x35 0x0 IRQ_TYPE_EDGE_RISING>;
@@ -207,12 +209,14 @@ examples:
     #include <dt-bindings/iio/qcom,spmi-adc7-pmk8350.h>
     #include <dt-bindings/iio/qcom,spmi-adc7-pm8350.h>
     #include <dt-bindings/interrupt-controller/irq.h>
-    spmi_bus {
+
+    pmic {
         #address-cells = <1>;
         #size-cells = <0>;
+
         pmk8350_vadc: adc@3100 {
-            reg = <0x3100>;
             compatible = "qcom,spmi-adc7";
+            reg = <0x3100>;
             #address-cells = <1>;
             #size-cells = <0>;
             #io-channel-cells = <1>;
@@ -233,7 +237,7 @@ examples:
             };
         };
 
-        pmk8350_adc_tm: adc-tm@3400 {
+        adc-tm@3400 {
             compatible = "qcom,spmi-adc-tm5-gen2";
             reg = <0x3400>;
             interrupts = <0x0 0x34 0x0 IRQ_TYPE_EDGE_RISING>;

Documentation/devicetree/bindings/thermal/qcom-spmi-adc-tm5.yaml

@@ -66,6 +66,7 @@ properties:
               - qcom,sm8350-tsens
               - qcom,sm8450-tsens
               - qcom,sm8550-tsens
+              - qcom,sm8650-tsens
           - const: qcom,tsens-v2
 
       - description: v2 of TSENS with combined interrupt

Documentation/devicetree/bindings/thermal/qcom-tsens.yaml

@@ -75,6 +75,22 @@ patternProperties:
           framework and assumes that the thermal sensors in this zone
           support interrupts.
 
+      critical-action:
+        $ref: /schemas/types.yaml#/definitions/string
+        description: |
+          The action the OS should perform after the critical temperature is reached.
+          By default the system will shutdown as a safe action to prevent damage
+          to the hardware, if the property is not set.
+          The shutdown action should be always the default and preferred one.
+          Choose 'reboot' with care, as the hardware may be in thermal stress,
+          thus leading to infinite reboots that may cause damage to the hardware.
+          Make sure the firmware/bootloader will act as the last resort and take
+          over the thermal control.
+
+        enum:
+          - shutdown
+          - reboot
+
       thermal-sensors:
         $ref: /schemas/types.yaml#/definitions/phandle-array
         maxItems: 1

Documentation/devicetree/bindings/thermal/thermal-zones.yaml

@@ -167,13 +167,11 @@ static int amlogic_thermal_enable(struct amlogic_thermal *data)
 	return 0;
 }
 
-static int amlogic_thermal_disable(struct amlogic_thermal *data)
+static void amlogic_thermal_disable(struct amlogic_thermal *data)
 {
 	regmap_update_bits(data->regmap, TSENSOR_CFG_REG1,
 			   TSENSOR_CFG_REG1_ENABLE, 0);
 	clk_disable_unprepare(data->clk);
-
-	return 0;
 }
 
 static int amlogic_thermal_get_temp(struct thermal_zone_device *tz, int *temp)
@@ -298,27 +296,30 @@ static void amlogic_thermal_remove(struct platform_device *pdev)
 	amlogic_thermal_disable(data);
 }
 
-static int __maybe_unused amlogic_thermal_suspend(struct device *dev)
+static int amlogic_thermal_suspend(struct device *dev)
 {
 	struct amlogic_thermal *data = dev_get_drvdata(dev);
 
-	return amlogic_thermal_disable(data);
+	amlogic_thermal_disable(data);
+
+	return 0;
 }
 
-static int __maybe_unused amlogic_thermal_resume(struct device *dev)
+static int amlogic_thermal_resume(struct device *dev)
 {
 	struct amlogic_thermal *data = dev_get_drvdata(dev);
 
 	return amlogic_thermal_enable(data);
 }
 
-static SIMPLE_DEV_PM_OPS(amlogic_thermal_pm_ops,
-			 amlogic_thermal_suspend, amlogic_thermal_resume);
+static DEFINE_SIMPLE_DEV_PM_OPS(amlogic_thermal_pm_ops,
+				amlogic_thermal_suspend,
+				amlogic_thermal_resume);
 
 static struct platform_driver amlogic_thermal_driver = {
 	.driver = {
 		.name		= "amlogic_thermal",
-		.pm		= &amlogic_thermal_pm_ops,
+		.pm		= pm_ptr(&amlogic_thermal_pm_ops),
 		.of_match_table = of_amlogic_thermal_match,
 	},
 	.probe = amlogic_thermal_probe,

drivers/thermal/amlogic_thermal.c

@@ -127,7 +127,7 @@ static int loongson2_thermal_probe(struct platform_device *pdev)
 		if (!IS_ERR(tzd))
 			break;
 
-		if (PTR_ERR(tzd) != ENODEV)
+		if (PTR_ERR(tzd) != -ENODEV)
 			continue;
 
 		return dev_err_probe(dev, PTR_ERR(tzd), "failed to register");