Merge tag 'edac_updates_for_v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras

Pull EDAC updates from Borislav Petkov:

 - Add a driver for the RAS functionality on Xilinx's on chip memory
   controller

 - Add support for decoding errors from the first and second level
   memory on SKL-based hardware

 - Add support for the memory controllers in Intel Granite Rapids and
   Emerald Rapids machines

 - First round of amd64_edac driver simplification and removal of
   unneeded functionality

 - The usual cleanups and fixes

* tag 'edac_updates_for_v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
  EDAC/amd64: Shut up an -Werror,-Wsometimes-uninitialized clang false positive
  EDAC/amd64: Remove early_channel_count()
  EDAC/amd64: Remove PCI Function 0
  EDAC/amd64: Remove PCI Function 6
  EDAC/amd64: Remove scrub rate control for Family 17h and later
  EDAC/amd64: Don't set up EDAC PCI control on Family 17h+
  EDAC/i10nm: Add driver decoder for Sapphire Rapids server
  EDAC/i10nm: Add Intel Granite Rapids server support
  EDAC/i10nm: Make more configurations CPU model specific
  EDAC/i10nm: Add Intel Emerald Rapids server support
  EDAC/skx_common: Delete duplicated and unreachable code
  EDAC/skx_common: Enable EDAC support for the "near" memory
  EDAC/qcom: Add platform_device_id table for module autoloading
  EDAC/zynqmp: Add EDAC support for Xilinx ZynqMP OCM
  dt-bindings: edac: Add bindings for Xilinx ZynqMP OCM

Author: torvalds

Documentation/devicetree/bindings/memory-controllers/xlnx,zynqmp-ocmc-1.0.yaml

@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/xlnx,zynqmp-ocmc-1.0.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xilinx Zynqmp OCM(On-Chip Memory) Controller
+
+maintainers:
+  - Shubhrajyoti Datta <shubhrajyoti.datta@amd.com>
+  - Sai Krishna Potthuri <sai.krishna.potthuri@amd.com>
+
+description: |
+  The OCM supports 64-bit wide ECC functionality to detect multi-bit errors
+  and recover from a single-bit memory fault.On a write, if all bytes are
+  being written, the ECC is generated and written into the ECC RAM along with
+  the write-data that is written into the data RAM. If one or more bytes are
+  not written, then the read operation results in an correctable error or
+  uncorrectable error.
+
+properties:
+  compatible:
+    const: xlnx,zynqmp-ocmc-1.0
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    memory-controller@ff960000 {
+      compatible = "xlnx,zynqmp-ocmc-1.0";
+      reg = <0xff960000 0x1000>;
+      interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+    };

MAINTAINERS

@@ -22743,6 +22743,13 @@ F:	Documentation/devicetree/bindings/dma/xilinx/xlnx,zynqmp-dpdma.yaml
 F:	drivers/dma/xilinx/xilinx_dpdma.c
 F:	include/dt-bindings/dma/xlnx-zynqmp-dpdma.h
 
+XILINX ZYNQMP OCM EDAC DRIVER
+M:	Shubhrajyoti Datta <shubhrajyoti.datta@amd.com>
+M:	Sai Krishna Potthuri <sai.krishna.potthuri@amd.com>
+S:	Maintained
+F:	Documentation/devicetree/bindings/memory-controllers/xlnx,zynqmp-ocmc-1.0.yaml
+F:	drivers/edac/zynqmp_edac.c
+
 XILINX ZYNQMP PSGTR PHY DRIVER
 M:	Anurag Kumar Vulisha <anurag.kumar.vulisha@xilinx.com>
 M:	Laurent Pinchart <laurent.pinchart@ideasonboard.com>

drivers/edac/Kconfig

@@ -542,4 +542,12 @@ config EDAC_DMC520
 	  Support for error detection and correction on the
 	  SoCs with ARM DMC-520 DRAM controller.
 
+config EDAC_ZYNQMP
+	tristate "Xilinx ZynqMP OCM Controller"
+	depends on ARCH_ZYNQMP || COMPILE_TEST
+	help
+	  This driver supports error detection and correction for the
+	  Xilinx ZynqMP OCM (On Chip Memory) controller. It can also be
+	  built as a module. In that case it will be called zynqmp_edac.
+
 endif # EDAC

drivers/edac/Makefile

@@ -84,3 +84,4 @@ obj-$(CONFIG_EDAC_QCOM)			+= qcom_edac.o
 obj-$(CONFIG_EDAC_ASPEED)		+= aspeed_edac.o
 obj-$(CONFIG_EDAC_BLUEFIELD)		+= bluefield_edac.o
 obj-$(CONFIG_EDAC_DMC520)		+= dmc520_edac.o
+obj-$(CONFIG_EDAC_ZYNQMP)		+= zynqmp_edac.o