gpio: pcf857x: Extend match data support for OF tables

The driver has OF match table, but still it uses an ID lookup table for
retrieving match data. Currently, the driver is working on the
assumption that an I2C device registered via OF will always match a
legacy I2C device ID. Extend match data support for OF tables by using
i2c_get_match_data() instead of the ID lookup for both OF/ID matches by
making similar OF/ID tables.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

Author: bijudas

drivers/gpio/gpio-pcf857x.c

@@ -36,19 +36,19 @@ static const struct i2c_device_id pcf857x_id[] = {
 MODULE_DEVICE_TABLE(i2c, pcf857x_id);
 
 static const struct of_device_id pcf857x_of_table[] = {
-	{ .compatible = "nxp,pcf8574" },
-	{ .compatible = "nxp,pcf8574a" },
-	{ .compatible = "nxp,pca8574" },
-	{ .compatible = "nxp,pca9670" },
-	{ .compatible = "nxp,pca9672" },
-	{ .compatible = "nxp,pca9674" },
-	{ .compatible = "nxp,pcf8575" },
-	{ .compatible = "nxp,pca8575" },
-	{ .compatible = "nxp,pca9671" },
-	{ .compatible = "nxp,pca9673" },
-	{ .compatible = "nxp,pca9675" },
-	{ .compatible = "maxim,max7328" },
-	{ .compatible = "maxim,max7329" },
+	{ .compatible = "nxp,pcf8574", (void *)8 },
+	{ .compatible = "nxp,pcf8574a", (void *)8 },
+	{ .compatible = "nxp,pca8574", (void *)8 },
+	{ .compatible = "nxp,pca9670", (void *)8 },
+	{ .compatible = "nxp,pca9672", (void *)8 },
+	{ .compatible = "nxp,pca9674", (void *)8 },
+	{ .compatible = "nxp,pcf8575", (void *)16 },
+	{ .compatible = "nxp,pca8575", (void *)16 },
+	{ .compatible = "nxp,pca9671", (void *)16 },
+	{ .compatible = "nxp,pca9673", (void *)16 },
+	{ .compatible = "nxp,pca9675", (void *)16 },
+	{ .compatible = "maxim,max7328", (void *)8 },
+	{ .compatible = "maxim,max7329", (void *)8 },
 	{ }
 };
 MODULE_DEVICE_TABLE(of, pcf857x_of_table);
@@ -272,7 +272,6 @@ static const struct irq_chip pcf857x_irq_chip = {
 
 static int pcf857x_probe(struct i2c_client *client)
 {
-	const struct i2c_device_id *id = i2c_client_get_device_id(client);
 	struct pcf857x *gpio;
 	unsigned int n_latch = 0;
 	int status;
@@ -296,7 +295,7 @@ static int pcf857x_probe(struct i2c_client *client)
 	gpio->chip.set_multiple		= pcf857x_set_multiple;
 	gpio->chip.direction_input	= pcf857x_input;
 	gpio->chip.direction_output	= pcf857x_output;
-	gpio->chip.ngpio		= id->driver_data;
+	gpio->chip.ngpio		= (uintptr_t)i2c_get_match_data(client);
 
 	/* NOTE:  the OnSemi jlc1562b is also largely compatible with
 	 * these parts, notably for output.  It has a low-resolution