hid: cp2112: Fix IRQ shutdown stopping polling for all IRQs on chip

Previously cp2112_gpio_irq_shutdown() always cancelled the
gpio_poll_worker, even if other IRQs were still active, and did not set
the gpio_poll flag to false. This resulted in any call to _shutdown()
resulting in interrupts no longer functioning on the chip until a
_remove() occurred (a.e. the cp2112 is unplugged or system rebooted).

Only cancel polling if all IRQs are disabled/masked, and correctly set
the gpio_poll flag, allowing polling to restart when an interrupt is
next enabled.

Signed-off-by: Danny Kaehn <danny.kaehn@plexus.com>
Fixes: 13de9cc ("HID: cp2112: add IRQ chip handling")
Link: https://lore.kernel.org/r/20231011182317.1053344-1-danny.kaehn@plexus.com
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>

Author: kaehnd

drivers/hid/hid-cp2112.c

@@ -1166,7 +1166,11 @@ static void cp2112_gpio_irq_shutdown(struct irq_data *d)
 	struct cp2112_device *dev = gpiochip_get_data(gc);
 
 	cp2112_gpio_irq_mask(d);
-	cancel_delayed_work_sync(&dev->gpio_poll_worker);
+
+	if (!dev->irq_mask) {
+		dev->gpio_poll = false;
+		cancel_delayed_work_sync(&dev->gpio_poll_worker);
+	}
 }
 
 static int cp2112_gpio_irq_type(struct irq_data *d, unsigned int type)