Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

Pull input updates from Dmitry Torokhov:

 - a fixup for Goodix touchscreen driver allowing it to work on certain
   Cherry Trail devices

 - a fix for imbalanced enable/disable regulator in Elam touchpad driver
   that became apparent when used with Asus TF103C 2-in-1 dock

 - a couple new input keycodes used on newer keyboards

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  HID: add mapping for KEY_ALL_APPLICATIONS
  HID: add mapping for KEY_DICTATE
  Input: elan_i2c - fix regulator enable count imbalance after suspend/resume
  Input: elan_i2c - move regulator_[en|dis]able() out of elan_[en|dis]able_power()
  Input: goodix - workaround Cherry Trail devices with a bogus ACPI Interrupt() resource
  Input: goodix - use the new soc_intel_is_byt() helper
  Input: samsung-keypad - properly state IOMEM dependency

Author: torvalds

drivers/hid/hid-debug.c

@@ -860,7 +860,9 @@ static const char *keys[KEY_MAX + 1] = {
 	[KEY_F22] = "F22",			[KEY_F23] = "F23",
 	[KEY_F24] = "F24",			[KEY_PLAYCD] = "PlayCD",
 	[KEY_PAUSECD] = "PauseCD",		[KEY_PROG3] = "Prog3",
-	[KEY_PROG4] = "Prog4",			[KEY_SUSPEND] = "Suspend",
+	[KEY_PROG4] = "Prog4",
+	[KEY_ALL_APPLICATIONS] = "AllApplications",
+	[KEY_SUSPEND] = "Suspend",
 	[KEY_CLOSE] = "Close",			[KEY_PLAY] = "Play",
 	[KEY_FASTFORWARD] = "FastForward",	[KEY_BASSBOOST] = "BassBoost",
 	[KEY_PRINT] = "Print",			[KEY_HP] = "HP",
@@ -969,6 +971,7 @@ static const char *keys[KEY_MAX + 1] = {
 	[KEY_ASSISTANT] = "Assistant",
 	[KEY_KBD_LAYOUT_NEXT] = "KbdLayoutNext",
 	[KEY_EMOJI_PICKER] = "EmojiPicker",
+	[KEY_DICTATE] = "Dictate",
 	[KEY_BRIGHTNESS_MIN] = "BrightnessMin",
 	[KEY_BRIGHTNESS_MAX] = "BrightnessMax",
 	[KEY_BRIGHTNESS_AUTO] = "BrightnessAuto",

drivers/hid/hid-input.c

@@ -992,6 +992,7 @@ static void hidinput_configure_usage(struct hid_input *hidinput, struct hid_fiel
 		case 0x0cd: map_key_clear(KEY_PLAYPAUSE);	break;
 		case 0x0cf: map_key_clear(KEY_VOICECOMMAND);	break;
 
+		case 0x0d8: map_key_clear(KEY_DICTATE);		break;
 		case 0x0d9: map_key_clear(KEY_EMOJI_PICKER);	break;
 
 		case 0x0e0: map_abs_clear(ABS_VOLUME);		break;
@@ -1083,6 +1084,8 @@ static void hidinput_configure_usage(struct hid_input *hidinput, struct hid_fiel
 
 		case 0x29d: map_key_clear(KEY_KBD_LAYOUT_NEXT);	break;
 
+		case 0x2a2: map_key_clear(KEY_ALL_APPLICATIONS);	break;
+
 		case 0x2c7: map_key_clear(KEY_KBDINPUTASSIST_PREV);		break;
 		case 0x2c8: map_key_clear(KEY_KBDINPUTASSIST_NEXT);		break;
 		case 0x2c9: map_key_clear(KEY_KBDINPUTASSIST_PREVGROUP);		break;

drivers/input/keyboard/Kconfig

@@ -556,7 +556,7 @@ config KEYBOARD_PMIC8XXX
 
 config KEYBOARD_SAMSUNG
 	tristate "Samsung keypad support"
-	depends on HAVE_CLK
+	depends on HAS_IOMEM && HAVE_CLK
 	select INPUT_MATRIXKMAP
 	help
 	  Say Y here if you want to use the keypad on your Samsung mobile

drivers/input/mouse/elan_i2c_core.c

@@ -186,55 +186,21 @@ static int elan_get_fwinfo(u16 ic_type, u8 iap_version, u16 *validpage_count,
 	return 0;
 }
 
-static int elan_enable_power(struct elan_tp_data *data)
+static int elan_set_power(struct elan_tp_data *data, bool on)
 {
 	int repeat = ETP_RETRY_COUNT;
 	int error;
 
-	error = regulator_enable(data->vcc);
-	if (error) {
-		dev_err(&data->client->dev,
-			"failed to enable regulator: %d\n", error);
-		return error;
-	}
-
 	do {
-		error = data->ops->power_control(data->client, true);
+		error = data->ops->power_control(data->client, on);
 		if (error >= 0)
 			return 0;
 
 		msleep(30);
 	} while (--repeat > 0);
 
-	dev_err(&data->client->dev, "failed to enable power: %d\n", error);
-	return error;
-}
-
-static int elan_disable_power(struct elan_tp_data *data)
-{
-	int repeat = ETP_RETRY_COUNT;
-	int error;
-
-	do {
-		error = data->ops->power_control(data->client, false);
-		if (!error) {
-			error = regulator_disable(data->vcc);
-			if (error) {
-				dev_err(&data->client->dev,
-					"failed to disable regulator: %d\n",
-					error);
-				/* Attempt to power the chip back up */
-				data->ops->power_control(data->client, true);
-				break;
-			}
-
-			return 0;
-		}
-
-		msleep(30);
-	} while (--repeat > 0);
-
-	dev_err(&data->client->dev, "failed to disable power: %d\n", error);
+	dev_err(&data->client->dev, "failed to set power %s: %d\n",
+		on ? "on" : "off", error);
 	return error;
 }
 
@@ -1399,9 +1365,19 @@ static int __maybe_unused elan_suspend(struct device *dev)
 		/* Enable wake from IRQ */
 		data->irq_wake = (enable_irq_wake(client->irq) == 0);
 	} else {
-		ret = elan_disable_power(data);
+		ret = elan_set_power(data, false);
+		if (ret)
+			goto err;
+
+		ret = regulator_disable(data->vcc);
+		if (ret) {
+			dev_err(dev, "error %d disabling regulator\n", ret);
+			/* Attempt to power the chip back up */
+			elan_set_power(data, true);
+		}
 	}
 
+err:
 	mutex_unlock(&data->sysfs_mutex);
 	return ret;
 }
@@ -1412,12 +1388,18 @@ static int __maybe_unused elan_resume(struct device *dev)
 	struct elan_tp_data *data = i2c_get_clientdata(client);
 	int error;
 
-	if (device_may_wakeup(dev) && data->irq_wake) {
+	if (!device_may_wakeup(dev)) {
+		error = regulator_enable(data->vcc);
+		if (error) {
+			dev_err(dev, "error %d enabling regulator\n", error);
+			goto err;
+		}
+	} else if (data->irq_wake) {
 		disable_irq_wake(client->irq);
 		data->irq_wake = false;
 	}
 
-	error = elan_enable_power(data);
+	error = elan_set_power(data, true);
 	if (error) {
 		dev_err(dev, "power up when resuming failed: %d\n", error);
 		goto err;

drivers/input/touchscreen/goodix.c

@@ -18,6 +18,7 @@
 #include <linux/delay.h>
 #include <linux/irq.h>
 #include <linux/interrupt.h>
+#include <linux/platform_data/x86/soc.h>
 #include <linux/slab.h>
 #include <linux/acpi.h>
 #include <linux/of.h>
@@ -805,21 +806,6 @@ static int goodix_reset(struct goodix_ts_data *ts)
 }
 
 #ifdef ACPI_GPIO_SUPPORT
-#include <asm/cpu_device_id.h>
-#include <asm/intel-family.h>
-
-static const struct x86_cpu_id baytrail_cpu_ids[] = {
-	{ X86_VENDOR_INTEL, 6, INTEL_FAM6_ATOM_SILVERMONT, X86_FEATURE_ANY, },
-	{}
-};
-
-static inline bool is_byt(void)
-{
-	const struct x86_cpu_id *id = x86_match_cpu(baytrail_cpu_ids);
-
-	return !!id;
-}
-
 static const struct acpi_gpio_params first_gpio = { 0, 0, false };
 static const struct acpi_gpio_params second_gpio = { 1, 0, false };
 
@@ -878,7 +864,7 @@ static int goodix_add_acpi_gpio_mappings(struct goodix_ts_data *ts)
 	const struct acpi_gpio_mapping *gpio_mapping = NULL;
 	struct device *dev = &ts->client->dev;
 	LIST_HEAD(resources);
-	int ret;
+	int irq, ret;
 
 	ts->gpio_count = 0;
 	ts->gpio_int_idx = -1;
@@ -891,6 +877,20 @@ static int goodix_add_acpi_gpio_mappings(struct goodix_ts_data *ts)
 
 	acpi_dev_free_resource_list(&resources);
 
+	/*
+	 * CHT devices should have a GpioInt + a regular GPIO ACPI resource.
+	 * Some CHT devices have a bug (where the also is bogus Interrupt
+	 * resource copied from a previous BYT based generation). i2c-core-acpi
+	 * will use the non-working Interrupt resource, fix this up.
+	 */
+	if (soc_intel_is_cht() && ts->gpio_count == 2 && ts->gpio_int_idx != -1) {
+		irq = acpi_dev_gpio_irq_get(ACPI_COMPANION(dev), 0);
+		if (irq > 0 && irq != ts->client->irq) {
+			dev_warn(dev, "Overriding IRQ %d -> %d\n", ts->client->irq, irq);
+			ts->client->irq = irq;
+		}
+	}
+
 	if (ts->gpio_count == 2 && ts->gpio_int_idx == 0) {
 		ts->irq_pin_access_method = IRQ_PIN_ACCESS_ACPI_GPIO;
 		gpio_mapping = acpi_goodix_int_first_gpios;
@@ -903,7 +903,7 @@ static int goodix_add_acpi_gpio_mappings(struct goodix_ts_data *ts)
 		dev_info(dev, "Using ACPI INTI and INTO methods for IRQ pin access\n");
 		ts->irq_pin_access_method = IRQ_PIN_ACCESS_ACPI_METHOD;
 		gpio_mapping = acpi_goodix_reset_only_gpios;
-	} else if (is_byt() && ts->gpio_count == 2 && ts->gpio_int_idx == -1) {
+	} else if (soc_intel_is_byt() && ts->gpio_count == 2 && ts->gpio_int_idx == -1) {
 		dev_info(dev, "No ACPI GpioInt resource, assuming that the GPIO order is reset, int\n");
 		ts->irq_pin_access_method = IRQ_PIN_ACCESS_ACPI_GPIO;
 		gpio_mapping = acpi_goodix_int_last_gpios;

include/uapi/linux/input-event-codes.h

@@ -278,7 +278,8 @@
 #define KEY_PAUSECD		201
 #define KEY_PROG3		202
 #define KEY_PROG4		203
-#define KEY_DASHBOARD		204	/* AL Dashboard */
+#define KEY_ALL_APPLICATIONS	204	/* AC Desktop Show All Applications */
+#define KEY_DASHBOARD		KEY_ALL_APPLICATIONS
 #define KEY_SUSPEND		205
 #define KEY_CLOSE		206	/* AC Close */
 #define KEY_PLAY		207
@@ -612,6 +613,7 @@
 #define KEY_ASSISTANT		0x247	/* AL Context-aware desktop assistant */
 #define KEY_KBD_LAYOUT_NEXT	0x248	/* AC Next Keyboard Layout Select */
 #define KEY_EMOJI_PICKER	0x249	/* Show/hide emoji picker (HUTRR101) */
+#define KEY_DICTATE		0x24a	/* Start or Stop Voice Dictation Session (HUTRR99) */
 
 #define KEY_BRIGHTNESS_MIN		0x250	/* Set Brightness to Minimum */
 #define KEY_BRIGHTNESS_MAX		0x251	/* Set Brightness to Maximum */