spi: dt-bindings: sun6i: Add compatibles for A523's SPI controllers

The A523 has four SPI controllers. One of them supports MIPI DBI mode
in addition to standard SPI.

Compared to older generations, this newer controller now has a combined
counter for the RX FIFO ad buffer levels. In older generations, the
RX buffer level was a separate bitfield in the FIFO status register.

In practice this difference is negligible. The buffer is mostly
invisible to the implementation. If programmed I/O transfers are limited
to the FIFO size, then the contents of the buffer seem to always be
flushed over to the FIFO. For DMA, the DRQ trigger levels are only tied
to the FIFO levels. In all other aspects, the controller is the same as
the one in the R329.

Add new compatible strings for the new controllers.

Signed-off-by: Chen-Yu Tsai <wens@kernel.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20251221110513.1850535-2-wens@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>

Author: wens

Documentation/devicetree/bindings/spi/allwinner,sun6i-a31-spi.yaml

@@ -17,6 +17,7 @@ properties:
   compatible:
     oneOf:
       - const: allwinner,sun50i-r329-spi
+      - const: allwinner,sun55i-a523-spi
       - const: allwinner,sun6i-a31-spi
       - const: allwinner,sun8i-h3-spi
       - items:
@@ -35,6 +36,9 @@ properties:
           - const: allwinner,sun20i-d1-spi-dbi
           - const: allwinner,sun50i-r329-spi-dbi
           - const: allwinner,sun50i-r329-spi
+      - items:
+          - const: allwinner,sun55i-a523-spi-dbi
+          - const: allwinner,sun55i-a523-spi
 
   reg:
     maxItems: 1