Merge tag 'qcom-clk-for-6.10' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into clk-qcom

Pull Qualcomm clk driver updates from Bjorn Andersson:

 - Add support in qcom RCG and RCG2 for multiple configurations for the same frequency
 - Use above support for IPQ8074 NSS port 5 and 6 clocks to resolve issues
 - Fix the Qualcomm APSS IPQ5018 PLL to fix boot failures of some boards
 - Cleanups and fixes for Qualcomm Stromer PLLs
 - Reduce max CPU frequency on Qualcomm APSS IPQ5018
 - Fix Kconfig dependencies of Qualcomm SM8650 GPU and SC8280XP camera
   clk drivers
 - Make Qualcomm MSM8998 Venus clocks functional
 - Cleanup downstream remnants related to DisplayPort across Qualcomm
   SM8450, SM6350, SM8550, and SM8650
 - Reuse the Huayra APSS register map on Qualcomm MSM8996 CBF PLL
 - Use a specific Qualcomm QCS404 compatible for the otherwise generic
   HFPLL
 - Remove Qualcomm SM8150 CPUSS AHB clk as it is unused
 - Remove an unused field in the Qualcomm RPM clk driver
 - Add missing MODULE_DEVICE_TABLE to Qualcomm MSM8917 and MSM8953
   global clock controller drivers

* tag 'qcom-clk-for-6.10' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (27 commits)
  clk: qcom: clk-alpha-pll: fix rate setting for Stromer PLLs
  clk: qcom: apss-ipq-pll: fix PLL rate for IPQ5018
  clk: qcom: Fix SM_GPUCC_8650 dependencies
  clk: qcom: Fix SC_CAMCC_8280XP dependencies
  clk: qcom: mmcc-msm8998: fix venus clock issue
  clk: qcom: dispcc-sm8650: fix DisplayPort clocks
  clk: qcom: dispcc-sm8550: fix DisplayPort clocks
  clk: qcom: dispcc-sm6350: fix DisplayPort clocks
  clk: qcom: dispcc-sm8450: fix DisplayPort clocks
  clk: qcom: clk-cbf-8996: use HUAYRA_APSS register map for cbf_pll
  clk: qcom: apss-ipq-pll: constify clk_init_data structures
  clk: qcom: apss-ipq-pll: constify match data structures
  clk: qcom: apss-ipq-pll: move Huayra register map to 'clk_alpha_pll_regs'
  clk: qcom: apss-ipq-pll: reuse Stromer reg offsets from 'clk_alpha_pll_regs'
  clk: qcom: apss-ipq-pll: use stromer ops for IPQ5018 to fix boot failure
  clk: qcom: gcc-ipq8074: rework nss_port5/6 clock to multiple conf
  clk: qcom: clk-rcg2: add support for rcg2 freq multi ops
  clk: qcom: clk-rcg: introduce support for multiple conf for same freq
  clk: qcom: hfpll: Add QCS404-specific compatible
  dt-bindings: clock: qcom,hfpll: Convert to YAML
  ...

Author: bebarino

Documentation/devicetree/bindings/clock/qcom,hfpll.txt

@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,hfpll.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm High-Frequency PLL
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+
+description:
+  The HFPLL is used as CPU PLL on various Qualcomm SoCs.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - qcom,msm8974-hfpll
+          - qcom,msm8976-hfpll-a53
+          - qcom,msm8976-hfpll-a72
+          - qcom,msm8976-hfpll-cci
+          - qcom,qcs404-hfpll
+      - const: qcom,hfpll
+        deprecated: true
+
+  reg:
+    items:
+      - description: HFPLL registers
+      - description: Alias register region
+    minItems: 1
+
+  '#clock-cells':
+    const: 0
+
+  clocks:
+    items:
+      - description: board XO clock
+
+  clock-names:
+    items:
+      - const: xo
+
+  clock-output-names:
+    description:
+      Name of the PLL. Typically hfpllX where X is a CPU number starting at 0.
+      Otherwise hfpll_Y where Y is more specific such as "l2".
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+  - clocks
+  - clock-names
+  - clock-output-names
+
+additionalProperties: false
+
+examples:
+  - |
+    clock-controller@f908a000 {
+        compatible = "qcom,msm8974-hfpll";
+        reg = <0xf908a000 0x30>, <0xf900a000 0x30>;
+        #clock-cells = <0>;
+        clock-output-names = "hfpll0";
+        clocks = <&xo_board>;
+        clock-names = "xo";
+    };

Documentation/devicetree/bindings/clock/qcom,hfpll.yaml

@@ -474,6 +474,7 @@ config SC_CAMCC_7280
 
 config SC_CAMCC_8280XP
 	tristate "SC8280XP Camera Clock Controller"
+	depends on ARM64 || COMPILE_TEST
 	select SC_GCC_8280XP
 	help
 	  Support for the camera clock controller on Qualcomm Technologies, Inc
@@ -1094,6 +1095,7 @@ config SM_GPUCC_8550
 
 config SM_GPUCC_8650
 	tristate "SM8650 Graphics Clock Controller"
+	depends on ARM64 || COMPILE_TEST
 	select SM_GCC_8650
 	help
 	  Support for the graphics clock controller on SM8650 devices.

drivers/clk/qcom/Kconfig

@@ -8,61 +8,54 @@
 
 #include "clk-alpha-pll.h"
 
-/*
- * Even though APSS PLL type is of existing one (like Huayra), its offsets
- * are different from the one mentioned in the clk-alpha-pll.c, since the
- * PLL is specific to APSS, so lets the define the same.
- */
-static const u8 ipq_pll_offsets[][PLL_OFF_MAX_REGS] = {
-	[CLK_ALPHA_PLL_TYPE_HUAYRA] =  {
-		[PLL_OFF_L_VAL] = 0x08,
-		[PLL_OFF_ALPHA_VAL] = 0x10,
-		[PLL_OFF_USER_CTL] = 0x18,
-		[PLL_OFF_CONFIG_CTL] = 0x20,
-		[PLL_OFF_CONFIG_CTL_U] = 0x24,
-		[PLL_OFF_STATUS] = 0x28,
-		[PLL_OFF_TEST_CTL] = 0x30,
-		[PLL_OFF_TEST_CTL_U] = 0x34,
-	},
-	[CLK_ALPHA_PLL_TYPE_STROMER_PLUS] = {
-		[PLL_OFF_L_VAL] = 0x08,
-		[PLL_OFF_ALPHA_VAL] = 0x10,
-		[PLL_OFF_ALPHA_VAL_U] = 0x14,
-		[PLL_OFF_USER_CTL] = 0x18,
-		[PLL_OFF_USER_CTL_U] = 0x1c,
-		[PLL_OFF_CONFIG_CTL] = 0x20,
-		[PLL_OFF_STATUS] = 0x28,
-		[PLL_OFF_TEST_CTL] = 0x30,
-		[PLL_OFF_TEST_CTL_U] = 0x34,
+static struct clk_alpha_pll ipq_pll_huayra = {
+	.offset = 0x0,
+	.regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_HUAYRA_APSS],
+	.flags = SUPPORTS_DYNAMIC_UPDATE,
+	.clkr = {
+		.enable_reg = 0x0,
+		.enable_mask = BIT(0),
+		.hw.init = &(const struct clk_init_data) {
+			.name = "a53pll",
+			.parent_data = &(const struct clk_parent_data) {
+				.fw_name = "xo",
+			},
+			.num_parents = 1,
+			.ops = &clk_alpha_pll_huayra_ops,
+		},
 	},
 };
 
-static struct clk_alpha_pll ipq_pll_huayra = {
+static struct clk_alpha_pll ipq_pll_stromer = {
 	.offset = 0x0,
-	.regs = ipq_pll_offsets[CLK_ALPHA_PLL_TYPE_HUAYRA],
+	.regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_STROMER],
 	.flags = SUPPORTS_DYNAMIC_UPDATE,
 	.clkr = {
 		.enable_reg = 0x0,
 		.enable_mask = BIT(0),
-		.hw.init = &(struct clk_init_data){
+		.hw.init = &(const struct clk_init_data) {
 			.name = "a53pll",
 			.parent_data = &(const struct clk_parent_data) {
 				.fw_name = "xo",
 			},
 			.num_parents = 1,
-			.ops = &clk_alpha_pll_huayra_ops,
+			.ops = &clk_alpha_pll_stromer_ops,
 		},
 	},
 };
 
 static struct clk_alpha_pll ipq_pll_stromer_plus = {
 	.offset = 0x0,
-	.regs = ipq_pll_offsets[CLK_ALPHA_PLL_TYPE_STROMER_PLUS],
+	/*
+	 * The register offsets of the Stromer Plus PLL used in IPQ5332
+	 * are the same as the Stromer PLL's offsets.
+	 */
+	.regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_STROMER],
 	.flags = SUPPORTS_DYNAMIC_UPDATE,
 	.clkr = {
 		.enable_reg = 0x0,
 		.enable_mask = BIT(0),
-		.hw.init = &(struct clk_init_data){
+		.hw.init = &(const struct clk_init_data) {
 			.name = "a53pll",
 			.parent_data = &(const struct clk_parent_data) {
 				.fw_name = "xo",
@@ -73,8 +66,9 @@ static struct clk_alpha_pll ipq_pll_stromer_plus = {
 	},
 };
 
+/* 1.008 GHz configuration */
 static const struct alpha_pll_config ipq5018_pll_config = {
-	.l = 0x32,
+	.l = 0x2a,
 	.config_ctl_val = 0x4001075b,
 	.config_ctl_hi_val = 0x304,
 	.main_output_mask = BIT(0),
@@ -144,30 +138,30 @@ struct apss_pll_data {
 };
 
 static const struct apss_pll_data ipq5018_pll_data = {
-	.pll_type = CLK_ALPHA_PLL_TYPE_STROMER_PLUS,
-	.pll = &ipq_pll_stromer_plus,
+	.pll_type = CLK_ALPHA_PLL_TYPE_STROMER,
+	.pll = &ipq_pll_stromer,
 	.pll_config = &ipq5018_pll_config,
 };
 
-static struct apss_pll_data ipq5332_pll_data = {
+static const struct apss_pll_data ipq5332_pll_data = {
 	.pll_type = CLK_ALPHA_PLL_TYPE_STROMER_PLUS,
 	.pll = &ipq_pll_stromer_plus,
 	.pll_config = &ipq5332_pll_config,
 };
 
-static struct apss_pll_data ipq8074_pll_data = {
+static const struct apss_pll_data ipq8074_pll_data = {
 	.pll_type = CLK_ALPHA_PLL_TYPE_HUAYRA,
 	.pll = &ipq_pll_huayra,
 	.pll_config = &ipq8074_pll_config,
 };
 
-static struct apss_pll_data ipq6018_pll_data = {
+static const struct apss_pll_data ipq6018_pll_data = {
 	.pll_type = CLK_ALPHA_PLL_TYPE_HUAYRA,
 	.pll = &ipq_pll_huayra,
 	.pll_config = &ipq6018_pll_config,
 };
 
-static struct apss_pll_data ipq9574_pll_data = {
+static const struct apss_pll_data ipq9574_pll_data = {
 	.pll_type = CLK_ALPHA_PLL_TYPE_HUAYRA,
 	.pll = &ipq_pll_huayra,
 	.pll_config = &ipq9574_pll_config,
@@ -203,7 +197,8 @@ static int apss_ipq_pll_probe(struct platform_device *pdev)
 
 	if (data->pll_type == CLK_ALPHA_PLL_TYPE_HUAYRA)
 		clk_alpha_pll_configure(data->pll, regmap, data->pll_config);
-	else if (data->pll_type == CLK_ALPHA_PLL_TYPE_STROMER_PLUS)
+	else if (data->pll_type == CLK_ALPHA_PLL_TYPE_STROMER ||
+		 data->pll_type == CLK_ALPHA_PLL_TYPE_STROMER_PLUS)
 		clk_stromer_pll_configure(data->pll, regmap, data->pll_config);
 
 	ret = devm_clk_register_regmap(dev, &data->pll->clkr);

drivers/clk/qcom/apss-ipq-pll.c

@@ -83,6 +83,16 @@ const u8 clk_alpha_pll_regs[][PLL_OFF_MAX_REGS] = {
 		[PLL_OFF_TEST_CTL_U] = 0x20,
 		[PLL_OFF_STATUS] = 0x24,
 	},
+	[CLK_ALPHA_PLL_TYPE_HUAYRA_APSS] =  {
+		[PLL_OFF_L_VAL] = 0x08,
+		[PLL_OFF_ALPHA_VAL] = 0x10,
+		[PLL_OFF_USER_CTL] = 0x18,
+		[PLL_OFF_CONFIG_CTL] = 0x20,
+		[PLL_OFF_CONFIG_CTL_U] = 0x24,
+		[PLL_OFF_STATUS] = 0x28,
+		[PLL_OFF_TEST_CTL] = 0x30,
+		[PLL_OFF_TEST_CTL_U] = 0x34,
+	},
 	[CLK_ALPHA_PLL_TYPE_BRAMMO] =  {
 		[PLL_OFF_L_VAL] = 0x04,
 		[PLL_OFF_ALPHA_VAL] = 0x08,
@@ -213,10 +223,9 @@ const u8 clk_alpha_pll_regs[][PLL_OFF_MAX_REGS] = {
 		[PLL_OFF_USER_CTL] = 0x18,
 		[PLL_OFF_USER_CTL_U] = 0x1c,
 		[PLL_OFF_CONFIG_CTL] = 0x20,
-		[PLL_OFF_CONFIG_CTL_U] = 0xff,
+		[PLL_OFF_STATUS] = 0x28,
 		[PLL_OFF_TEST_CTL] = 0x30,
 		[PLL_OFF_TEST_CTL_U] = 0x34,
-		[PLL_OFF_STATUS] = 0x28,
 	},
 	[CLK_ALPHA_PLL_TYPE_STROMER_PLUS] =  {
 		[PLL_OFF_L_VAL] = 0x04,
@@ -2114,6 +2123,15 @@ void clk_lucid_evo_pll_configure(struct clk_alpha_pll *pll, struct regmap *regma
 {
 	u32 lval = config->l;
 
+	/*
+	 * If the bootloader left the PLL enabled it's likely that there are
+	 * RCGs that will lock up if we disable the PLL below.
+	 */
+	if (trion_pll_is_enabled(pll, regmap)) {
+		pr_debug("Lucid Evo PLL is already enabled, skipping configuration\n");
+		return;
+	}
+
 	lval |= TRION_PLL_CAL_VAL << LUCID_EVO_PLL_CAL_L_VAL_SHIFT;
 	clk_alpha_pll_write_config(regmap, PLL_L_VAL(pll), lval);
 	clk_alpha_pll_write_config(regmap, PLL_ALPHA_VAL(pll), config->alpha);
@@ -2490,6 +2508,8 @@ static int clk_alpha_pll_stromer_set_rate(struct clk_hw *hw, unsigned long rate,
 	rate = alpha_pll_round_rate(rate, prate, &l, &a, ALPHA_REG_BITWIDTH);
 
 	regmap_write(pll->clkr.regmap, PLL_L_VAL(pll), l);
+
+	a <<= ALPHA_REG_BITWIDTH - ALPHA_BITWIDTH;
 	regmap_write(pll->clkr.regmap, PLL_ALPHA_VAL(pll), a);
 	regmap_write(pll->clkr.regmap, PLL_ALPHA_VAL_U(pll),
 		     a >> ALPHA_BITWIDTH);

drivers/clk/qcom/clk-alpha-pll.c

@@ -15,6 +15,7 @@
 enum {
 	CLK_ALPHA_PLL_TYPE_DEFAULT,
 	CLK_ALPHA_PLL_TYPE_HUAYRA,
+	CLK_ALPHA_PLL_TYPE_HUAYRA_APSS,
 	CLK_ALPHA_PLL_TYPE_BRAMMO,
 	CLK_ALPHA_PLL_TYPE_FABIA,
 	CLK_ALPHA_PLL_TYPE_TRION,
@@ -73,8 +74,10 @@ struct pll_vco {
 /**
  * struct clk_alpha_pll - phase locked loop (PLL)
  * @offset: base address of registers
- * @vco_table: array of VCO settings
  * @regs: alpha pll register map (see @clk_alpha_pll_regs)
+ * @vco_table: array of VCO settings
+ * @num_vco: number of VCO settings in @vco_table
+ * @flags: bitmask to indicate features supported by the hardware
  * @clkr: regmap clock handle
  */
 struct clk_alpha_pll {

drivers/clk/qcom/clk-alpha-pll.h

@@ -41,17 +41,6 @@ enum {
 
 #define CBF_PLL_OFFSET 0xf000
 
-static const u8 cbf_pll_regs[PLL_OFF_MAX_REGS] = {
-	[PLL_OFF_L_VAL] = 0x08,
-	[PLL_OFF_ALPHA_VAL] = 0x10,
-	[PLL_OFF_USER_CTL] = 0x18,
-	[PLL_OFF_CONFIG_CTL] = 0x20,
-	[PLL_OFF_CONFIG_CTL_U] = 0x24,
-	[PLL_OFF_TEST_CTL] = 0x30,
-	[PLL_OFF_TEST_CTL_U] = 0x34,
-	[PLL_OFF_STATUS] = 0x28,
-};
-
 static struct alpha_pll_config cbfpll_config = {
 	.l = 72,
 	.config_ctl_val = 0x200d4828,
@@ -67,7 +56,7 @@ static struct alpha_pll_config cbfpll_config = {
 
 static struct clk_alpha_pll cbf_pll = {
 	.offset = CBF_PLL_OFFSET,
-	.regs = cbf_pll_regs,
+	.regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_HUAYRA_APSS],
 	.flags = SUPPORTS_DYNAMIC_UPDATE | SUPPORTS_FSM_MODE,
 	.clkr.hw.init = &(struct clk_init_data){
 		.name = "cbf_pll",