Skip to content

Commit e5f62e2

Browse files
bonzinibonzini
committed
Merge tag 'kvmarm-6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 updates for Linux 6.10 - Move a lot of state that was previously stored on a per vcpu basis into a per-CPU area, because it is only pertinent to the host while the vcpu is loaded. This results in better state tracking, and a smaller vcpu structure. - Add full handling of the ERET/ERETAA/ERETAB instructions in nested virtualisation. The last two instructions also require emulating part of the pointer authentication extension. As a result, the trap handling of pointer authentication has been greattly simplified. - Turn the global (and not very scalable) LPI translation cache into a per-ITS, scalable cache, making non directly injected LPIs much cheaper to make visible to the vcpu. - A batch of pKVM patches, mostly fixes and cleanups, as the upstreaming process seems to be resuming. Fingers crossed! - Allocate PPIs and SGIs outside of the vcpu structure, allowing for smaller EL2 mapping and some flexibility in implementing more or less than 32 private IRQs. - Purge stale mpidr_data if a vcpu is created after the MPIDR map has been created. - Preserve vcpu-specific ID registers across a vcpu reset. - Various minor cleanups and improvements.
2 parents 4232da2 + eaa46a2 commit e5f62e2

74 files changed

Lines changed: 2971 additions & 1056 deletions

Some content is hidden

Large Commits have some content hidden by default. Use the searchbox below for content that may be hidden.

‎Documentation/virt/kvm/api.rst‎

Lines changed: 7 additions & 0 deletions
Original file line numberDiff line numberDiff line change
@@ -6894,6 +6894,13 @@ Note that KVM does not skip the faulting instruction as it does for
68946894
KVM_EXIT_MMIO, but userspace has to emulate any change to the processing state
68956895
if it decides to decode and emulate the instruction.
68966896

6897+
This feature isn't available to protected VMs, as userspace does not
6898+
have access to the state that is required to perform the emulation.
6899+
Instead, a data abort exception is directly injected in the guest.
6900+
Note that although KVM_CAP_ARM_NISV_TO_USER will be reported if
6901+
queried outside of a protected VM context, the feature will not be
6902+
exposed if queried on a protected VM file descriptor.
6903+
68976904
::
68986905

68996906
/* KVM_EXIT_X86_RDMSR / KVM_EXIT_X86_WRMSR */

‎Documentation/virt/kvm/arm/fw-pseudo-registers.rst‎

Lines changed: 138 additions & 0 deletions
Original file line numberDiff line numberDiff line change
@@ -0,0 +1,138 @@
1+
.. SPDX-License-Identifier: GPL-2.0
2+
3+
=======================================
4+
ARM firmware pseudo-registers interface
5+
=======================================
6+
7+
KVM handles the hypercall services as requested by the guests. New hypercall
8+
services are regularly made available by the ARM specification or by KVM (as
9+
vendor services) if they make sense from a virtualization point of view.
10+
11+
This means that a guest booted on two different versions of KVM can observe
12+
two different "firmware" revisions. This could cause issues if a given guest
13+
is tied to a particular version of a hypercall service, or if a migration
14+
causes a different version to be exposed out of the blue to an unsuspecting
15+
guest.
16+
17+
In order to remedy this situation, KVM exposes a set of "firmware
18+
pseudo-registers" that can be manipulated using the GET/SET_ONE_REG
19+
interface. These registers can be saved/restored by userspace, and set
20+
to a convenient value as required.
21+
22+
The following registers are defined:
23+
24+
* KVM_REG_ARM_PSCI_VERSION:
25+
26+
KVM implements the PSCI (Power State Coordination Interface)
27+
specification in order to provide services such as CPU on/off, reset
28+
and power-off to the guest.
29+
30+
- Only valid if the vcpu has the KVM_ARM_VCPU_PSCI_0_2 feature set
31+
(and thus has already been initialized)
32+
- Returns the current PSCI version on GET_ONE_REG (defaulting to the
33+
highest PSCI version implemented by KVM and compatible with v0.2)
34+
- Allows any PSCI version implemented by KVM and compatible with
35+
v0.2 to be set with SET_ONE_REG
36+
- Affects the whole VM (even if the register view is per-vcpu)
37+
38+
* KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_1:
39+
Holds the state of the firmware support to mitigate CVE-2017-5715, as
40+
offered by KVM to the guest via a HVC call. The workaround is described
41+
under SMCCC_ARCH_WORKAROUND_1 in [1].
42+
43+
Accepted values are:
44+
45+
KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_1_NOT_AVAIL:
46+
KVM does not offer
47+
firmware support for the workaround. The mitigation status for the
48+
guest is unknown.
49+
KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_1_AVAIL:
50+
The workaround HVC call is
51+
available to the guest and required for the mitigation.
52+
KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_1_NOT_REQUIRED:
53+
The workaround HVC call
54+
is available to the guest, but it is not needed on this VCPU.
55+
56+
* KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2:
57+
Holds the state of the firmware support to mitigate CVE-2018-3639, as
58+
offered by KVM to the guest via a HVC call. The workaround is described
59+
under SMCCC_ARCH_WORKAROUND_2 in [1]_.
60+
61+
Accepted values are:
62+
63+
KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2_NOT_AVAIL:
64+
A workaround is not
65+
available. KVM does not offer firmware support for the workaround.
66+
KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2_UNKNOWN:
67+
The workaround state is
68+
unknown. KVM does not offer firmware support for the workaround.
69+
KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2_AVAIL:
70+
The workaround is available,
71+
and can be disabled by a vCPU. If
72+
KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2_ENABLED is set, it is active for
73+
this vCPU.
74+
KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2_NOT_REQUIRED:
75+
The workaround is always active on this vCPU or it is not needed.
76+
77+
78+
Bitmap Feature Firmware Registers
79+
---------------------------------
80+
81+
Contrary to the above registers, the following registers exposes the
82+
hypercall services in the form of a feature-bitmap to the userspace. This
83+
bitmap is translated to the services that are available to the guest.
84+
There is a register defined per service call owner and can be accessed via
85+
GET/SET_ONE_REG interface.
86+
87+
By default, these registers are set with the upper limit of the features
88+
that are supported. This way userspace can discover all the usable
89+
hypercall services via GET_ONE_REG. The user-space can write-back the
90+
desired bitmap back via SET_ONE_REG. The features for the registers that
91+
are untouched, probably because userspace isn't aware of them, will be
92+
exposed as is to the guest.
93+
94+
Note that KVM will not allow the userspace to configure the registers
95+
anymore once any of the vCPUs has run at least once. Instead, it will
96+
return a -EBUSY.
97+
98+
The pseudo-firmware bitmap register are as follows:
99+
100+
* KVM_REG_ARM_STD_BMAP:
101+
Controls the bitmap of the ARM Standard Secure Service Calls.
102+
103+
The following bits are accepted:
104+
105+
Bit-0: KVM_REG_ARM_STD_BIT_TRNG_V1_0:
106+
The bit represents the services offered under v1.0 of ARM True Random
107+
Number Generator (TRNG) specification, ARM DEN0098.
108+
109+
* KVM_REG_ARM_STD_HYP_BMAP:
110+
Controls the bitmap of the ARM Standard Hypervisor Service Calls.
111+
112+
The following bits are accepted:
113+
114+
Bit-0: KVM_REG_ARM_STD_HYP_BIT_PV_TIME:
115+
The bit represents the Paravirtualized Time service as represented by
116+
ARM DEN0057A.
117+
118+
* KVM_REG_ARM_VENDOR_HYP_BMAP:
119+
Controls the bitmap of the Vendor specific Hypervisor Service Calls.
120+
121+
The following bits are accepted:
122+
123+
Bit-0: KVM_REG_ARM_VENDOR_HYP_BIT_FUNC_FEAT
124+
The bit represents the ARM_SMCCC_VENDOR_HYP_KVM_FEATURES_FUNC_ID
125+
and ARM_SMCCC_VENDOR_HYP_CALL_UID_FUNC_ID function-ids.
126+
127+
Bit-1: KVM_REG_ARM_VENDOR_HYP_BIT_PTP:
128+
The bit represents the Precision Time Protocol KVM service.
129+
130+
Errors:
131+
132+
======= =============================================================
133+
-ENOENT Unknown register accessed.
134+
-EBUSY Attempt a 'write' to the register after the VM has started.
135+
-EINVAL Invalid bitmap written to the register.
136+
======= =============================================================
137+
138+
.. [1] https://developer.arm.com/-/media/developer/pdf/ARM_DEN_0070A_Firmware_interfaces_for_mitigating_CVE-2017-5715.pdf

‎Documentation/virt/kvm/arm/hypercalls.rst‎

Lines changed: 44 additions & 136 deletions
Original file line numberDiff line numberDiff line change
@@ -1,138 +1,46 @@
11
.. SPDX-License-Identifier: GPL-2.0
22
3-
=======================
4-
ARM Hypercall Interface
5-
=======================
6-
7-
KVM handles the hypercall services as requested by the guests. New hypercall
8-
services are regularly made available by the ARM specification or by KVM (as
9-
vendor services) if they make sense from a virtualization point of view.
10-
11-
This means that a guest booted on two different versions of KVM can observe
12-
two different "firmware" revisions. This could cause issues if a given guest
13-
is tied to a particular version of a hypercall service, or if a migration
14-
causes a different version to be exposed out of the blue to an unsuspecting
15-
guest.
16-
17-
In order to remedy this situation, KVM exposes a set of "firmware
18-
pseudo-registers" that can be manipulated using the GET/SET_ONE_REG
19-
interface. These registers can be saved/restored by userspace, and set
20-
to a convenient value as required.
21-
22-
The following registers are defined:
23-
24-
* KVM_REG_ARM_PSCI_VERSION:
25-
26-
KVM implements the PSCI (Power State Coordination Interface)
27-
specification in order to provide services such as CPU on/off, reset
28-
and power-off to the guest.
29-
30-
- Only valid if the vcpu has the KVM_ARM_VCPU_PSCI_0_2 feature set
31-
(and thus has already been initialized)
32-
- Returns the current PSCI version on GET_ONE_REG (defaulting to the
33-
highest PSCI version implemented by KVM and compatible with v0.2)
34-
- Allows any PSCI version implemented by KVM and compatible with
35-
v0.2 to be set with SET_ONE_REG
36-
- Affects the whole VM (even if the register view is per-vcpu)
37-
38-
* KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_1:
39-
Holds the state of the firmware support to mitigate CVE-2017-5715, as
40-
offered by KVM to the guest via a HVC call. The workaround is described
41-
under SMCCC_ARCH_WORKAROUND_1 in [1].
42-
43-
Accepted values are:
44-
45-
KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_1_NOT_AVAIL:
46-
KVM does not offer
47-
firmware support for the workaround. The mitigation status for the
48-
guest is unknown.
49-
KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_1_AVAIL:
50-
The workaround HVC call is
51-
available to the guest and required for the mitigation.
52-
KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_1_NOT_REQUIRED:
53-
The workaround HVC call
54-
is available to the guest, but it is not needed on this VCPU.
55-
56-
* KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2:
57-
Holds the state of the firmware support to mitigate CVE-2018-3639, as
58-
offered by KVM to the guest via a HVC call. The workaround is described
59-
under SMCCC_ARCH_WORKAROUND_2 in [1]_.
60-
61-
Accepted values are:
62-
63-
KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2_NOT_AVAIL:
64-
A workaround is not
65-
available. KVM does not offer firmware support for the workaround.
66-
KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2_UNKNOWN:
67-
The workaround state is
68-
unknown. KVM does not offer firmware support for the workaround.
69-
KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2_AVAIL:
70-
The workaround is available,
71-
and can be disabled by a vCPU. If
72-
KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2_ENABLED is set, it is active for
73-
this vCPU.
74-
KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2_NOT_REQUIRED:
75-
The workaround is always active on this vCPU or it is not needed.
76-
77-
78-
Bitmap Feature Firmware Registers
79-
---------------------------------
80-
81-
Contrary to the above registers, the following registers exposes the
82-
hypercall services in the form of a feature-bitmap to the userspace. This
83-
bitmap is translated to the services that are available to the guest.
84-
There is a register defined per service call owner and can be accessed via
85-
GET/SET_ONE_REG interface.
86-
87-
By default, these registers are set with the upper limit of the features
88-
that are supported. This way userspace can discover all the usable
89-
hypercall services via GET_ONE_REG. The user-space can write-back the
90-
desired bitmap back via SET_ONE_REG. The features for the registers that
91-
are untouched, probably because userspace isn't aware of them, will be
92-
exposed as is to the guest.
93-
94-
Note that KVM will not allow the userspace to configure the registers
95-
anymore once any of the vCPUs has run at least once. Instead, it will
96-
return a -EBUSY.
97-
98-
The pseudo-firmware bitmap register are as follows:
99-
100-
* KVM_REG_ARM_STD_BMAP:
101-
Controls the bitmap of the ARM Standard Secure Service Calls.
102-
103-
The following bits are accepted:
104-
105-
Bit-0: KVM_REG_ARM_STD_BIT_TRNG_V1_0:
106-
The bit represents the services offered under v1.0 of ARM True Random
107-
Number Generator (TRNG) specification, ARM DEN0098.
108-
109-
* KVM_REG_ARM_STD_HYP_BMAP:
110-
Controls the bitmap of the ARM Standard Hypervisor Service Calls.
111-
112-
The following bits are accepted:
113-
114-
Bit-0: KVM_REG_ARM_STD_HYP_BIT_PV_TIME:
115-
The bit represents the Paravirtualized Time service as represented by
116-
ARM DEN0057A.
117-
118-
* KVM_REG_ARM_VENDOR_HYP_BMAP:
119-
Controls the bitmap of the Vendor specific Hypervisor Service Calls.
120-
121-
The following bits are accepted:
122-
123-
Bit-0: KVM_REG_ARM_VENDOR_HYP_BIT_FUNC_FEAT
124-
The bit represents the ARM_SMCCC_VENDOR_HYP_KVM_FEATURES_FUNC_ID
125-
and ARM_SMCCC_VENDOR_HYP_CALL_UID_FUNC_ID function-ids.
126-
127-
Bit-1: KVM_REG_ARM_VENDOR_HYP_BIT_PTP:
128-
The bit represents the Precision Time Protocol KVM service.
129-
130-
Errors:
131-
132-
======= =============================================================
133-
-ENOENT Unknown register accessed.
134-
-EBUSY Attempt a 'write' to the register after the VM has started.
135-
-EINVAL Invalid bitmap written to the register.
136-
======= =============================================================
137-
138-
.. [1] https://developer.arm.com/-/media/developer/pdf/ARM_DEN_0070A_Firmware_interfaces_for_mitigating_CVE-2017-5715.pdf
3+
===============================================
4+
KVM/arm64-specific hypercalls exposed to guests
5+
===============================================
6+
7+
This file documents the KVM/arm64-specific hypercalls which may be
8+
exposed by KVM/arm64 to guest operating systems. These hypercalls are
9+
issued using the HVC instruction according to version 1.1 of the Arm SMC
10+
Calling Convention (DEN0028/C):
11+
12+
https://developer.arm.com/docs/den0028/c
13+
14+
All KVM/arm64-specific hypercalls are allocated within the "Vendor
15+
Specific Hypervisor Service Call" range with a UID of
16+
``28b46fb6-2ec5-11e9-a9ca-4b564d003a74``. This UID should be queried by the
17+
guest using the standard "Call UID" function for the service range in
18+
order to determine that the KVM/arm64-specific hypercalls are available.
19+
20+
``ARM_SMCCC_VENDOR_HYP_KVM_FEATURES_FUNC_ID``
21+
---------------------------------------------
22+
23+
Provides a discovery mechanism for other KVM/arm64 hypercalls.
24+
25+
+---------------------+-------------------------------------------------------------+
26+
| Presence: | Mandatory for the KVM/arm64 UID |
27+
+---------------------+-------------------------------------------------------------+
28+
| Calling convention: | HVC32 |
29+
+---------------------+----------+--------------------------------------------------+
30+
| Function ID: | (uint32) | 0x86000000 |
31+
+---------------------+----------+--------------------------------------------------+
32+
| Arguments: | None |
33+
+---------------------+----------+----+---------------------------------------------+
34+
| Return Values: | (uint32) | R0 | Bitmap of available function numbers 0-31 |
35+
| +----------+----+---------------------------------------------+
36+
| | (uint32) | R1 | Bitmap of available function numbers 32-63 |
37+
| +----------+----+---------------------------------------------+
38+
| | (uint32) | R2 | Bitmap of available function numbers 64-95 |
39+
| +----------+----+---------------------------------------------+
40+
| | (uint32) | R3 | Bitmap of available function numbers 96-127 |
41+
+---------------------+----------+----+---------------------------------------------+
42+
43+
``ARM_SMCCC_VENDOR_HYP_KVM_PTP_FUNC_ID``
44+
----------------------------------------
45+
46+
See ptp_kvm.rst

‎Documentation/virt/kvm/arm/index.rst‎

Lines changed: 1 addition & 0 deletions
Original file line numberDiff line numberDiff line change
@@ -7,6 +7,7 @@ ARM
77
.. toctree::
88
:maxdepth: 2
99

10+
fw-pseudo-registers
1011
hyp-abi
1112
hypercalls
1213
pvtime

‎Documentation/virt/kvm/arm/ptp_kvm.rst‎

Lines changed: 24 additions & 14 deletions
Original file line numberDiff line numberDiff line change
@@ -7,19 +7,29 @@ PTP_KVM is used for high precision time sync between host and guests.
77
It relies on transferring the wall clock and counter value from the
88
host to the guest using a KVM-specific hypercall.
99

10-
* ARM_SMCCC_VENDOR_HYP_KVM_PTP_FUNC_ID: 0x86000001
10+
``ARM_SMCCC_VENDOR_HYP_KVM_PTP_FUNC_ID``
11+
----------------------------------------
1112

12-
This hypercall uses the SMC32/HVC32 calling convention:
13+
Retrieve current time information for the specific counter. There are no
14+
endianness restrictions.
1315

14-
ARM_SMCCC_VENDOR_HYP_KVM_PTP_FUNC_ID
15-
============== ======== =====================================
16-
Function ID: (uint32) 0x86000001
17-
Arguments: (uint32) KVM_PTP_VIRT_COUNTER(0)
18-
KVM_PTP_PHYS_COUNTER(1)
19-
Return Values: (int32) NOT_SUPPORTED(-1) on error, or
20-
(uint32) Upper 32 bits of wall clock time (r0)
21-
(uint32) Lower 32 bits of wall clock time (r1)
22-
(uint32) Upper 32 bits of counter (r2)
23-
(uint32) Lower 32 bits of counter (r3)
24-
Endianness: No Restrictions.
25-
============== ======== =====================================
16+
+---------------------+-------------------------------------------------------+
17+
| Presence: | Optional |
18+
+---------------------+-------------------------------------------------------+
19+
| Calling convention: | HVC32 |
20+
+---------------------+----------+--------------------------------------------+
21+
| Function ID: | (uint32) | 0x86000001 |
22+
+---------------------+----------+----+---------------------------------------+
23+
| Arguments: | (uint32) | R1 | ``KVM_PTP_VIRT_COUNTER (0)`` |
24+
| | | +---------------------------------------+
25+
| | | | ``KVM_PTP_PHYS_COUNTER (1)`` |
26+
+---------------------+----------+----+---------------------------------------+
27+
| Return Values: | (int32) | R0 | ``NOT_SUPPORTED (-1)`` on error, else |
28+
| | | | upper 32 bits of wall clock time |
29+
| +----------+----+---------------------------------------+
30+
| | (uint32) | R1 | Lower 32 bits of wall clock time |
31+
| +----------+----+---------------------------------------+
32+
| | (uint32) | R2 | Upper 32 bits of counter |
33+
| +----------+----+---------------------------------------+
34+
| | (uint32) | R3 | Lower 32 bits of counter |
35+
+---------------------+----------+----+---------------------------------------+

0 commit comments

Comments
 (0)