Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Cross-merge networking fixes after downstream PR.

No conflicts.

Adjacent changes:

drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
  35d92ab ("net: hns3: fix kernel crash when devlink reload during initialization")
  2a1a1a7 ("net: hns3: add command queue trace for hns3")

Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Author: kuba-moo

Documentation/admin-guide/kernel-parameters.txt

@@ -4594,9 +4594,10 @@
 		norid		[S390] ignore the RID field and force use of
 				one PCI domain per PCI function
 
-	pcie_aspm=	[PCIE] Forcibly enable or disable PCIe Active State Power
+	pcie_aspm=	[PCIE] Forcibly enable or ignore PCIe Active State Power
 			Management.
-		off	Disable ASPM.
+		off	Don't touch ASPM configuration at all.  Leave any
+			configuration done by firmware unchanged.
 		force	Enable ASPM even on devices that claim not to support it.
 			WARNING: Forcing ASPM on may cause system lockups.
 

Documentation/devicetree/bindings/iio/health/maxim,max30102.yaml

@@ -42,7 +42,7 @@ allOf:
       properties:
         compatible:
           contains:
-            const: maxim,max30100
+            const: maxim,max30102
     then:
       properties:
         maxim,green-led-current-microamp: false

Documentation/devicetree/bindings/net/mediatek,net.yaml

@@ -337,8 +337,8 @@ allOf:
           minItems: 4
 
         clocks:
-          minItems: 34
-          maxItems: 34
+          minItems: 24
+          maxItems: 24
 
         clock-names:
           items:
@@ -351,18 +351,6 @@ allOf:
             - const: ethwarp_wocpu1
             - const: ethwarp_wocpu0
             - const: esw
-            - const: netsys0
-            - const: netsys1
-            - const: sgmii_tx250m
-            - const: sgmii_rx250m
-            - const: sgmii2_tx250m
-            - const: sgmii2_rx250m
-            - const: top_usxgmii0_sel
-            - const: top_usxgmii1_sel
-            - const: top_sgm0_sel
-            - const: top_sgm1_sel
-            - const: top_xfi_phy0_xtal_sel
-            - const: top_xfi_phy1_xtal_sel
             - const: top_eth_gmii_sel
             - const: top_eth_refck_50m_sel
             - const: top_eth_sys_200m_sel
@@ -375,16 +363,10 @@ allOf:
             - const: top_netsys_sync_250m_sel
             - const: top_netsys_ppefb_250m_sel
             - const: top_netsys_warp_sel
-            - const: wocpu1
-            - const: wocpu0
             - const: xgp1
             - const: xgp2
             - const: xgp3
 
-        mediatek,sgmiisys:
-          minItems: 2
-          maxItems: 2
-
 patternProperties:
   "^mac@[0-1]$":
     type: object

Documentation/devicetree/bindings/sound/rt5645.txt

@@ -20,6 +20,11 @@ Optional properties:
   a GPIO spec for the external headphone detect pin. If jd-mode = 0,
   we will get the JD status by getting the value of hp-detect-gpios.
 
+- cbj-sleeve-gpios:
+  a GPIO spec to control the external combo jack circuit to tie the sleeve/ring2
+  contacts to the ground or floating. It could avoid some electric noise from the
+  active speaker jacks.
+
 - realtek,in2-differential
   Boolean. Indicate MIC2 input are differential, rather than single-ended.
 
@@ -68,6 +73,7 @@ codec: rt5650@1a {
 	compatible = "realtek,rt5650";
 	reg = <0x1a>;
 	hp-detect-gpios = <&gpio 19 0>;
+	cbj-sleeve-gpios = <&gpio 20 0>;
 	interrupt-parent = <&gpio>;
 	interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
 	realtek,dmic-en = "true";

Documentation/netlink/specs/rt_link.yaml

@@ -1576,6 +1576,12 @@ attribute-sets:
       -
         name: mcast-querier-state
         type: binary
+      -
+        name: fdb-n-learned
+        type: u32
+      -
+        name: fdb-max-learned
+        type: u32
   -
     name: linkinfo-brport-attrs
     name-prefix: ifla-brport-

MAINTAINERS

@@ -5717,7 +5717,7 @@ Q:	http://patchwork.linuxtv.org/project/linux-media/list/
 F:	drivers/media/dvb-frontends/cxd2820r*
 
 CXGB3 ETHERNET DRIVER (CXGB3)
-M:	Raju Rangoju <rajur@chelsio.com>
+M:	Potnuri Bharat Teja <bharat@chelsio.com>
 L:	netdev@vger.kernel.org
 S:	Supported
 W:	http://www.chelsio.com
@@ -5738,7 +5738,7 @@ W:	http://www.chelsio.com
 F:	drivers/crypto/chelsio
 
 CXGB4 ETHERNET DRIVER (CXGB4)
-M:	Raju Rangoju <rajur@chelsio.com>
+M:	Potnuri Bharat Teja <bharat@chelsio.com>
 L:	netdev@vger.kernel.org
 S:	Supported
 W:	http://www.chelsio.com
@@ -5767,7 +5767,7 @@ F:	drivers/infiniband/hw/cxgb4/
 F:	include/uapi/rdma/cxgb4-abi.h
 
 CXGB4VF ETHERNET DRIVER (CXGB4VF)
-M:	Raju Rangoju <rajur@chelsio.com>
+M:	Potnuri Bharat Teja <bharat@chelsio.com>
 L:	netdev@vger.kernel.org
 S:	Supported
 W:	http://www.chelsio.com

Makefile

@@ -2,7 +2,7 @@
 VERSION = 6
 PATCHLEVEL = 9
 SUBLEVEL = 0
-EXTRAVERSION = -rc6
+EXTRAVERSION = -rc7
 NAME = Hurr durr I'ma ninja sloth
 
 # *DOCUMENTATION*

arch/arm/kernel/sleep.S

@@ -127,6 +127,10 @@ cpu_resume_after_mmu:
 	instr_sync
 #endif
 	bl	cpu_init		@ restore the und/abt/irq banked regs
+#if defined(CONFIG_KASAN) && defined(CONFIG_KASAN_STACK)
+	mov	r0, sp
+	bl	kasan_unpoison_task_stack_below
+#endif
 	mov	r0, #0			@ return zero on success
 	ldmfd	sp!, {r4 - r11, pc}
 ENDPROC(cpu_resume_after_mmu)

arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-pico6.dts

@@ -82,7 +82,8 @@
 };
 
 &mmc1 {
-	bt_reset: bt-reset {
+	bluetooth@2 {
+		reg = <2>;
 		compatible = "mediatek,mt7921s-bluetooth";
 		pinctrl-names = "default";
 		pinctrl-0 = <&bt_pins_reset>;

arch/arm64/boot/dts/qcom/sa8155p-adp.dts

@@ -367,6 +367,16 @@
 	};
 };
 
+&pmm8155au_1_gpios {
+	pmm8155au_1_sdc2_cd: sdc2-cd-default-state {
+		pins = "gpio4";
+		function = "normal";
+		input-enable;
+		bias-pull-up;
+		power-source = <0>;
+	};
+};
+
 &qupv3_id_1 {
 	status = "okay";
 };
@@ -384,10 +394,10 @@
 &sdhc_2 {
 	status = "okay";
 
-	cd-gpios = <&tlmm 4 GPIO_ACTIVE_LOW>;
+	cd-gpios = <&pmm8155au_1_gpios 4 GPIO_ACTIVE_LOW>;
 	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&sdc2_on>;
-	pinctrl-1 = <&sdc2_off>;
+	pinctrl-0 = <&sdc2_on &pmm8155au_1_sdc2_cd>;
+	pinctrl-1 = <&sdc2_off &pmm8155au_1_sdc2_cd>;
 	vqmmc-supply = <&vreg_l13c_2p96>; /* IO line power */
 	vmmc-supply = <&vreg_l17a_2p96>;  /* Card power line */
 	bus-width = <4>;
@@ -505,13 +515,6 @@
 			bias-pull-up;		/* pull up */
 			drive-strength = <16>;	/* 16 MA */
 		};
-
-		sd-cd-pins {
-			pins = "gpio96";
-			function = "gpio";
-			bias-pull-up;		/* pull up */
-			drive-strength = <2>;	/* 2 MA */
-		};
 	};
 
 	sdc2_off: sdc2-off-state {
@@ -532,13 +535,6 @@
 			bias-pull-up;		/* pull up */
 			drive-strength = <2>;	/* 2 MA */
 		};
-
-		sd-cd-pins {
-			pins = "gpio96";
-			function = "gpio";
-			bias-pull-up;		/* pull up */
-			drive-strength = <2>;	/* 2 MA */
-		};
 	};
 
 	usb2phy_ac_en1_default: usb2phy-ac-en1-default-state {