Merge tag 'net-6.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Pull networking fixes from Paolo Abeni:
 "Including fixes from CAN and BPF.

  We have a regression in TC currently under investigation, otherwise
  the things that stand off most are probably the TCP and AF_PACKET
  fixes, with both issues coming from 6.5.

  Previous releases - regressions:

   - af_packet: fix fortified memcpy() without flex array.

   - tcp: fix crashes trying to free half-baked MTU probes

   - xdp: fix zero-size allocation warning in xskq_create()

   - can: sja1000: always restart the tx queue after an overrun

   - eth: mlx5e: again mutually exclude RX-FCS and RX-port-timestamp

   - eth: nfp: avoid rmmod nfp crash issues

   - eth: octeontx2-pf: fix page pool frag allocation warning

  Previous releases - always broken:

   - mctp: perform route lookups under a RCU read-side lock

   - bpf: s390: fix clobbering the caller's backchain in the trampoline

   - phy: lynx-28g: cancel the CDR check work item on the remove path

   - dsa: qca8k: fix qca8k driver for Turris 1.x

   - eth: ravb: fix use-after-free issue in ravb_tx_timeout_work()

   - eth: ixgbe: fix crash with empty VF macvlan list"

* tag 'net-6.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (54 commits)
  rswitch: Fix imbalance phy_power_off() calling
  rswitch: Fix renesas_eth_sw_remove() implementation
  octeontx2-pf: Fix page pool frag allocation warning
  nfc: nci: assert requested protocol is valid
  af_packet: Fix fortified memcpy() without flex array.
  net: tcp: fix crashes trying to free half-baked MTU probes
  net/smc: Fix pos miscalculation in statistics
  nfp: flower: avoid rmmod nfp crash issues
  net: usb: dm9601: fix uninitialized variable use in dm9601_mdio_read
  ethtool: Fix mod state of verbose no_mask bitset
  net: nfc: fix races in nfc_llcp_sock_get() and nfc_llcp_sock_get_sn()
  mctp: perform route lookups under a RCU read-side lock
  net: skbuff: fix kernel-doc typos
  s390/bpf: Fix unwinding past the trampoline
  s390/bpf: Fix clobbering the caller's backchain in the trampoline
  net/mlx5e: Again mutually exclude RX-FCS and RX-port-timestamp
  net/smc: Fix dependency of SMC on ISM
  ixgbe: fix crash with empty VF macvlan list
  net/mlx5e: macsec: use update_pn flag instead of PN comparation
  net: phy: mscc: macsec: reject PN update requests
  ...

Author: torvalds

arch/arm64/boot/dts/freescale/imx93.dtsi

@@ -185,7 +185,7 @@
 			#size-cells = <1>;
 			ranges;
 
-			anomix_ns_gpr: syscon@44210000 {
+			aonmix_ns_gpr: syscon@44210000 {
 				compatible = "fsl,imx93-aonmix-ns-syscfg", "syscon";
 				reg = <0x44210000 0x1000>;
 			};
@@ -319,6 +319,7 @@
 				assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>;
 				assigned-clock-rates = <40000000>;
 				fsl,clk-source = /bits/ 8 <0>;
+				fsl,stop-mode = <&aonmix_ns_gpr 0x14 0>;
 				status = "disabled";
 			};
 
@@ -591,6 +592,7 @@
 				assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>;
 				assigned-clock-rates = <40000000>;
 				fsl,clk-source = /bits/ 8 <0>;
+				fsl,stop-mode = <&wakeupmix_gpr 0x0c 2>;
 				status = "disabled";
 			};
 

arch/riscv/net/bpf_jit_comp64.c

@@ -245,7 +245,7 @@ static void __build_epilogue(bool is_tail_call, struct rv_jit_context *ctx)
 	emit_addi(RV_REG_SP, RV_REG_SP, stack_adjust, ctx);
 	/* Set return value. */
 	if (!is_tail_call)
-		emit_mv(RV_REG_A0, RV_REG_A5, ctx);
+		emit_addiw(RV_REG_A0, RV_REG_A5, 0, ctx);
 	emit_jalr(RV_REG_ZERO, is_tail_call ? RV_REG_T3 : RV_REG_RA,
 		  is_tail_call ? (RV_FENTRY_NINSNS + 1) * 4 : 0, /* skip reserved nops and TCC init */
 		  ctx);
@@ -759,8 +759,10 @@ static int invoke_bpf_prog(struct bpf_tramp_link *l, int args_off, int retval_of
 	if (ret)
 		return ret;
 
-	if (save_ret)
-		emit_sd(RV_REG_FP, -retval_off, regmap[BPF_REG_0], ctx);
+	if (save_ret) {
+		emit_sd(RV_REG_FP, -retval_off, RV_REG_A0, ctx);
+		emit_sd(RV_REG_FP, -(retval_off - 8), regmap[BPF_REG_0], ctx);
+	}
 
 	/* update branch with beqz */
 	if (ctx->insns) {
@@ -853,7 +855,7 @@ static int __arch_prepare_bpf_trampoline(struct bpf_tramp_image *im,
 
 	save_ret = flags & (BPF_TRAMP_F_CALL_ORIG | BPF_TRAMP_F_RET_FENTRY_RET);
 	if (save_ret) {
-		stack_size += 8;
+		stack_size += 16; /* Save both A5 (BPF R0) and A0 */
 		retval_off = stack_size;
 	}
 
@@ -957,6 +959,7 @@ static int __arch_prepare_bpf_trampoline(struct bpf_tramp_image *im,
 		if (ret)
 			goto out;
 		emit_sd(RV_REG_FP, -retval_off, RV_REG_A0, ctx);
+		emit_sd(RV_REG_FP, -(retval_off - 8), regmap[BPF_REG_0], ctx);
 		im->ip_after_call = ctx->insns + ctx->ninsns;
 		/* 2 nops reserved for auipc+jalr pair */
 		emit(rv_nop(), ctx);
@@ -988,8 +991,10 @@ static int __arch_prepare_bpf_trampoline(struct bpf_tramp_image *im,
 	if (flags & BPF_TRAMP_F_RESTORE_REGS)
 		restore_args(nregs, args_off, ctx);
 
-	if (save_ret)
+	if (save_ret) {
 		emit_ld(RV_REG_A0, -retval_off, RV_REG_FP, ctx);
+		emit_ld(regmap[BPF_REG_0], -(retval_off - 8), RV_REG_FP, ctx);
+	}
 
 	emit_ld(RV_REG_S1, -sreg_off, RV_REG_FP, ctx);
 
@@ -1515,7 +1520,8 @@ int bpf_jit_emit_insn(const struct bpf_insn *insn, struct rv_jit_context *ctx,
 		if (ret)
 			return ret;
 
-		emit_mv(bpf_to_rv_reg(BPF_REG_0, ctx), RV_REG_A0, ctx);
+		if (insn->src_reg != BPF_PSEUDO_CALL)
+			emit_mv(bpf_to_rv_reg(BPF_REG_0, ctx), RV_REG_A0, ctx);
 		break;
 	}
 	/* tail call */

arch/s390/net/bpf_jit_comp.c

@@ -2066,6 +2066,7 @@ struct bpf_tramp_jit {
 				 * func_addr's original caller
 				 */
 	int stack_size;		/* Trampoline stack size */
+	int backchain_off;	/* Offset of backchain */
 	int stack_args_off;	/* Offset of stack arguments for calling
 				 * func_addr, has to be at the top
 				 */
@@ -2086,9 +2087,10 @@ struct bpf_tramp_jit {
 				 * for __bpf_prog_enter() return value and
 				 * func_addr respectively
 				 */
-	int r14_off;		/* Offset of saved %r14 */
 	int run_ctx_off;	/* Offset of struct bpf_tramp_run_ctx */
 	int tccnt_off;		/* Offset of saved tailcall counter */
+	int r14_off;		/* Offset of saved %r14, has to be at the
+				 * bottom */
 	int do_fexit;		/* do_fexit: label */
 };
 
@@ -2247,25 +2249,38 @@ static int __arch_prepare_bpf_trampoline(struct bpf_tramp_image *im,
 	 * Calculate the stack layout.
 	 */
 
-	/* Reserve STACK_FRAME_OVERHEAD bytes for the callees. */
+	/*
+	 * Allocate STACK_FRAME_OVERHEAD bytes for the callees. As the s390x
+	 * ABI requires, put our backchain at the end of the allocated memory.
+	 */
 	tjit->stack_size = STACK_FRAME_OVERHEAD;
+	tjit->backchain_off = tjit->stack_size - sizeof(u64);
 	tjit->stack_args_off = alloc_stack(tjit, nr_stack_args * sizeof(u64));
 	tjit->reg_args_off = alloc_stack(tjit, nr_reg_args * sizeof(u64));
 	tjit->ip_off = alloc_stack(tjit, sizeof(u64));
 	tjit->arg_cnt_off = alloc_stack(tjit, sizeof(u64));
 	tjit->bpf_args_off = alloc_stack(tjit, nr_bpf_args * sizeof(u64));
 	tjit->retval_off = alloc_stack(tjit, sizeof(u64));
 	tjit->r7_r8_off = alloc_stack(tjit, 2 * sizeof(u64));
-	tjit->r14_off = alloc_stack(tjit, sizeof(u64));
 	tjit->run_ctx_off = alloc_stack(tjit,
 					sizeof(struct bpf_tramp_run_ctx));
 	tjit->tccnt_off = alloc_stack(tjit, sizeof(u64));
-	/* The caller has already reserved STACK_FRAME_OVERHEAD bytes. */
-	tjit->stack_size -= STACK_FRAME_OVERHEAD;
+	tjit->r14_off = alloc_stack(tjit, sizeof(u64) * 2);
+	/*
+	 * In accordance with the s390x ABI, the caller has allocated
+	 * STACK_FRAME_OVERHEAD bytes for us. 8 of them contain the caller's
+	 * backchain, and the rest we can use.
+	 */
+	tjit->stack_size -= STACK_FRAME_OVERHEAD - sizeof(u64);
 	tjit->orig_stack_args_off = tjit->stack_size + STACK_FRAME_OVERHEAD;
 
+	/* lgr %r1,%r15 */
+	EMIT4(0xb9040000, REG_1, REG_15);
 	/* aghi %r15,-stack_size */
 	EMIT4_IMM(0xa70b0000, REG_15, -tjit->stack_size);
+	/* stg %r1,backchain_off(%r15) */
+	EMIT6_DISP_LH(0xe3000000, 0x0024, REG_1, REG_0, REG_15,
+		      tjit->backchain_off);
 	/* mvc tccnt_off(4,%r15),stack_size+STK_OFF_TCCNT(%r15) */
 	_EMIT6(0xd203f000 | tjit->tccnt_off,
 	       0xf000 | (tjit->stack_size + STK_OFF_TCCNT));

drivers/net/can/Kconfig

@@ -190,7 +190,7 @@ config CAN_SLCAN
 
 config CAN_SUN4I
 	tristate "Allwinner A10 CAN controller"
-	depends on MACH_SUN4I || MACH_SUN7I || RISCV || COMPILE_TEST
+	depends on MACH_SUN4I || MACH_SUN7I || (RISCV && ARCH_SUNXI) || COMPILE_TEST
 	help
 	  Say Y here if you want to use CAN controller found on Allwinner
 	  A10/A20/D1 SoCs.

drivers/net/can/flexcan/flexcan-core.c

@@ -348,7 +348,7 @@ static struct flexcan_devtype_data fsl_imx8mp_devtype_data = {
 static struct flexcan_devtype_data fsl_imx93_devtype_data = {
 	.quirks = FLEXCAN_QUIRK_DISABLE_RXFG | FLEXCAN_QUIRK_ENABLE_EACEN_RRS |
 		FLEXCAN_QUIRK_DISABLE_MECR | FLEXCAN_QUIRK_USE_RX_MAILBOX |
-		FLEXCAN_QUIRK_BROKEN_PERR_STATE | FLEXCAN_QUIRK_AUTO_STOP_MODE |
+		FLEXCAN_QUIRK_BROKEN_PERR_STATE | FLEXCAN_QUIRK_SETUP_STOP_MODE_GPR |
 		FLEXCAN_QUIRK_SUPPORT_FD | FLEXCAN_QUIRK_SUPPORT_ECC |
 		FLEXCAN_QUIRK_SUPPORT_RX_MAILBOX |
 		FLEXCAN_QUIRK_SUPPORT_RX_MAILBOX_RTR,
@@ -544,11 +544,6 @@ static inline int flexcan_enter_stop_mode(struct flexcan_priv *priv)
 	} else if (priv->devtype_data.quirks & FLEXCAN_QUIRK_SETUP_STOP_MODE_GPR) {
 		regmap_update_bits(priv->stm.gpr, priv->stm.req_gpr,
 				   1 << priv->stm.req_bit, 1 << priv->stm.req_bit);
-	} else if (priv->devtype_data.quirks & FLEXCAN_QUIRK_AUTO_STOP_MODE) {
-		/* For the auto stop mode, software do nothing, hardware will cover
-		 * all the operation automatically after system go into low power mode.
-		 */
-		return 0;
 	}
 
 	return flexcan_low_power_enter_ack(priv);
@@ -574,12 +569,6 @@ static inline int flexcan_exit_stop_mode(struct flexcan_priv *priv)
 	reg_mcr &= ~FLEXCAN_MCR_SLF_WAK;
 	priv->write(reg_mcr, &regs->mcr);
 
-	/* For the auto stop mode, hardware will exist stop mode
-	 * automatically after system go out of low power mode.
-	 */
-	if (priv->devtype_data.quirks & FLEXCAN_QUIRK_AUTO_STOP_MODE)
-		return 0;
-
 	return flexcan_low_power_exit_ack(priv);
 }
 
@@ -1994,13 +1983,18 @@ static int flexcan_setup_stop_mode(struct platform_device *pdev)
 		ret = flexcan_setup_stop_mode_scfw(pdev);
 	else if (priv->devtype_data.quirks & FLEXCAN_QUIRK_SETUP_STOP_MODE_GPR)
 		ret = flexcan_setup_stop_mode_gpr(pdev);
-	else if (priv->devtype_data.quirks & FLEXCAN_QUIRK_AUTO_STOP_MODE)
-		ret = 0;
 	else
 		/* return 0 directly if doesn't support stop mode feature */
 		return 0;
 
-	if (ret)
+	/* If ret is -EINVAL, this means SoC claim to support stop mode, but
+	 * dts file lack the stop mode property definition. For this case,
+	 * directly return 0, this will skip the wakeup capable setting and
+	 * will not block the driver probe.
+	 */
+	if (ret == -EINVAL)
+		return 0;
+	else if (ret)
 		return ret;
 
 	device_set_wakeup_capable(&pdev->dev, true);
@@ -2320,16 +2314,8 @@ static int __maybe_unused flexcan_noirq_suspend(struct device *device)
 	if (netif_running(dev)) {
 		int err;
 
-		if (device_may_wakeup(device)) {
+		if (device_may_wakeup(device))
 			flexcan_enable_wakeup_irq(priv, true);
-			/* For auto stop mode, need to keep the clock on before
-			 * system go into low power mode. After system go into
-			 * low power mode, hardware will config the flexcan into
-			 * stop mode, and gate off the clock automatically.
-			 */
-			if (priv->devtype_data.quirks & FLEXCAN_QUIRK_AUTO_STOP_MODE)
-				return 0;
-		}
 
 		err = pm_runtime_force_suspend(device);
 		if (err)
@@ -2347,15 +2333,9 @@ static int __maybe_unused flexcan_noirq_resume(struct device *device)
 	if (netif_running(dev)) {
 		int err;
 
-		/* For the wakeup in auto stop mode, no need to gate on the
-		 * clock here, hardware will do this automatically.
-		 */
-		if (!(device_may_wakeup(device) &&
-		      priv->devtype_data.quirks & FLEXCAN_QUIRK_AUTO_STOP_MODE)) {
-			err = pm_runtime_force_resume(device);
-			if (err)
-				return err;
-		}
+		err = pm_runtime_force_resume(device);
+		if (err)
+			return err;
 
 		if (device_may_wakeup(device))
 			flexcan_enable_wakeup_irq(priv, false);

drivers/net/can/flexcan/flexcan.h

@@ -68,8 +68,6 @@
 #define FLEXCAN_QUIRK_SUPPORT_RX_MAILBOX_RTR BIT(15)
 /* Device supports RX via FIFO */
 #define FLEXCAN_QUIRK_SUPPORT_RX_FIFO BIT(16)
-/* auto enter stop mode to support wakeup */
-#define FLEXCAN_QUIRK_AUTO_STOP_MODE BIT(17)
 
 struct flexcan_devtype_data {
 	u32 quirks;		/* quirks needed for different IP cores */

drivers/net/can/m_can/tcan4x5x-core.c

@@ -125,7 +125,7 @@ static const struct tcan4x5x_version_info tcan4x5x_versions[] = {
 	},
 	[TCAN4553] = {
 		.name = "4553",
-		.id2_register = 0x32353534,
+		.id2_register = 0x33353534,
 	},
 	/* generic version with no id2_register at the end */
 	[TCAN4X5X] = {

drivers/net/can/sja1000/sja1000.c

@@ -392,7 +392,13 @@ static irqreturn_t sja1000_reset_interrupt(int irq, void *dev_id)
 	struct net_device *dev = (struct net_device *)dev_id;
 
 	netdev_dbg(dev, "performing a soft reset upon overrun\n");
-	sja1000_start(dev);
+
+	netif_tx_lock(dev);
+
+	can_free_echo_skb(dev, 0, NULL);
+	sja1000_set_mode(dev, CAN_MODE_START);
+
+	netif_tx_unlock(dev);
 
 	return IRQ_HANDLED;
 }

drivers/net/dsa/qca/qca8k-8xxx.c

@@ -505,8 +505,8 @@ qca8k_bulk_read(void *ctx, const void *reg_buf, size_t reg_len,
 		void *val_buf, size_t val_len)
 {
 	int i, count = val_len / sizeof(u32), ret;
-	u32 reg = *(u32 *)reg_buf & U16_MAX;
 	struct qca8k_priv *priv = ctx;
+	u32 reg = *(u16 *)reg_buf;
 
 	if (priv->mgmt_master &&
 	    !qca8k_read_eth(priv, reg, val_buf, val_len))
@@ -527,8 +527,8 @@ qca8k_bulk_gather_write(void *ctx, const void *reg_buf, size_t reg_len,
 			const void *val_buf, size_t val_len)
 {
 	int i, count = val_len / sizeof(u32), ret;
-	u32 reg = *(u32 *)reg_buf & U16_MAX;
 	struct qca8k_priv *priv = ctx;
+	u32 reg = *(u16 *)reg_buf;
 	u32 *val = (u32 *)val_buf;
 
 	if (priv->mgmt_master &&
@@ -666,6 +666,15 @@ qca8k_phy_eth_command(struct qca8k_priv *priv, bool read, int phy,
 		goto err_read_skb;
 	}
 
+	/* It seems that accessing the switch's internal PHYs via management
+	 * packets still uses the MDIO bus within the switch internally, and
+	 * these accesses can conflict with external MDIO accesses to other
+	 * devices on the MDIO bus.
+	 * We therefore need to lock the MDIO bus onto which the switch is
+	 * connected.
+	 */
+	mutex_lock(&priv->bus->mdio_lock);
+
 	/* Actually start the request:
 	 * 1. Send mdio master packet
 	 * 2. Busy Wait for mdio master command
@@ -678,6 +687,7 @@ qca8k_phy_eth_command(struct qca8k_priv *priv, bool read, int phy,
 	mgmt_master = priv->mgmt_master;
 	if (!mgmt_master) {
 		mutex_unlock(&mgmt_eth_data->mutex);
+		mutex_unlock(&priv->bus->mdio_lock);
 		ret = -EINVAL;
 		goto err_mgmt_master;
 	}
@@ -765,6 +775,7 @@ qca8k_phy_eth_command(struct qca8k_priv *priv, bool read, int phy,
 				    QCA8K_ETHERNET_TIMEOUT);
 
 	mutex_unlock(&mgmt_eth_data->mutex);
+	mutex_unlock(&priv->bus->mdio_lock);
 
 	return ret;
 

drivers/net/ethernet/intel/ice/ice_lag.c

@@ -2093,3 +2093,35 @@ void ice_lag_rebuild(struct ice_pf *pf)
 	}
 	mutex_unlock(&pf->lag_mutex);
 }
+
+/**
+ * ice_lag_is_switchdev_running
+ * @pf: pointer to PF structure
+ *
+ * Check if switchdev is running on any of the interfaces connected to lag.
+ */
+bool ice_lag_is_switchdev_running(struct ice_pf *pf)
+{
+	struct ice_lag *lag = pf->lag;
+	struct net_device *tmp_nd;
+
+	if (!ice_is_feature_supported(pf, ICE_F_SRIOV_LAG) || !lag)
+		return false;
+
+	rcu_read_lock();
+	for_each_netdev_in_bond_rcu(lag->upper_netdev, tmp_nd) {
+		struct ice_netdev_priv *priv = netdev_priv(tmp_nd);
+
+		if (!netif_is_ice(tmp_nd) || !priv || !priv->vsi ||
+		    !priv->vsi->back)
+			continue;
+
+		if (ice_is_switchdev_running(priv->vsi->back)) {
+			rcu_read_unlock();
+			return true;
+		}
+	}
+	rcu_read_unlock();
+
+	return false;
+}