ASoC: tas2781: Add tas2563 into header file for DSP mode

Move tas2563 from tas2562 header file to tas2781 header file to unbind
tas2563 from tas2562 driver code and bind it to tas2781 driver code,
because tas2563 only work in bypass-DSP mode with tas2562 driver. In
order to enable DSP mode for tas2563, it has been moved to tas2781
driver. As to the hardware part, such as register setting and DSP
firmware, all these are stored in the binary firmware. What tas2781
drivder does is to parse the firmware and download it to the chip,
then power on the chip. So, tas2781 driver can be resued as tas2563
driver. Only attention will be paid to downloading corresponding firmware.

Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Link: https://msgid.link/r/20240104145721.1398-3-shenghao-ding@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>

Author: Shenghao-Ding

include/sound/tas2781.h

@@ -1,13 +1,13 @@
 /* SPDX-License-Identifier: GPL-2.0 */
 //
-// ALSA SoC Texas Instruments TAS2781 Audio Smart Amplifier
+// ALSA SoC Texas Instruments TAS2563/TAS2781 Audio Smart Amplifier
 //
 // Copyright (C) 2022 - 2023 Texas Instruments Incorporated
 // https://www.ti.com
 //
-// The TAS2781 driver implements a flexible and configurable
+// The TAS2563/TAS2781 driver implements a flexible and configurable
 // algo coefficient setting for one, two, or even multiple
-// TAS2781 chips.
+// TAS2563/TAS2781 chips.
 //
 // Author: Shenghao Ding <shenghao-ding@ti.com>
 // Author: Kevin Lu <kevin-lu@ti.com>
@@ -59,7 +59,8 @@
 #define TASDEVICE_CMD_FIELD_W		0x4
 
 enum audio_device {
-	TAS2781	= 0,
+	TAS2563,
+	TAS2781,
 };
 
 enum device_catlog_id {